Details, datasheet, quote on part number: TC646EPA
PartTC646EPA
CategoryPower Management => PWM Controllers
DescriptionPWM Fan Speed Controller With Auto-shutdown And Fansense Technology
CompanyMicrochip Technology, Inc.
DatasheetDownload TC646EPA datasheet
Quote
Find where to buy
 
  

 

Features, Applications
Features

Temperature Proportional Fan Speed for Acoustic Control and Longer Fan Life Efficient PWM Fan Drive to 5.5V Supply Range: - Fan Voltage Independent of TC646 Supply Voltage - Supports any Fan Voltage FanSenseTM Fault Detection Circuits Protect Against Fan Failure and Aid System Testing Shutdown Mode for "Green" Systems Supports Low Cost NTC/PTC Thermistors Space Saving 8-Pin MSOP Package Over-temperature Indication

PWM Fan Speed Controller with Auto-Shutdown and FanSenseTM Technology

The is a switch mode, fan speed controller for use with brushless DC fans. Temperature proportional speed control is accomplished using pulse width modulation (PWM). A thermistor (or other voltage output temperature sensor) connected to the VIN input furnishes the required control voltage to 2.65V (typical) for to 100% PWM duty cycle. The TC646 automatically suspends fan operation when measured temperature (VIN) is below a user programmed minimum setting (VAS). An integrated Start-up Timer ensures reliable motor start-up at turn-on, coming out of shutdown mode, auto-shutdown mode or following a transient fault. The TC646 features Microchip Technology's proprietary FanSenseTM technology for increasing system reliability. In normal fan operation, a pulse train is present at SENSE (Pin 5). A missing-pulse detector monitors this pin during fan operation. A stalled, open, or unconnected fan causes the TC646 to trigger its Start-up Timer once. If the fault persists, the FAULT output goes low and the device is latched in its shutdown mode. FAULT is also asserted if the PWM reaches 100% duty cycle, indicating a possible thermal runaway situation, although the fan continues to run. See Section 5.0, "Typical Applications", for more information and system design guidelines. The TC646 is available in the 8-pin plastic DIP, SOIC and MSOP packages and is available in the industrial and extended commercial temperature ranges.

Applications

Power Supplies Computers File Servers Portable Computers Telecom Equipment UPS, Power Amps General Purpose Fan Speed Control

*Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operation sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Supply Voltage......................................................... 6V Input Voltage, Any Pin..... (GND to (VDD+0.3V) Package Thermal Resistance: PDIP (RJA)............................................. 125°C/W SOIC (RJA)............................................ 155°C/W MSOP (R JA).......................................... 200°C/W Specified Temperature Range........... to +125°C Storage Temperature Range.............. to +150°C

Electrical Characteristics: Unless otherwise specified, TMIN TA TMAX, VDD to 5.5V Symbol VDD IDD IDD(SHDN) Parameter Supply Voltage Supply Current, Operating Supply Current, Shutdown/ Auto-shutdown Mode VIN, VAS Input Leakage VOUT Rise Time VOUT Fall Time Pulse Width(On VIN ) to Clear Fault Mode Sink Current at VOUT Output Source Current at V OUT Output Min 3.0 Typ 0.5 25 Max 5.5 1.0 Units mA µA Pins 6, 7 Open, = 1 µF, VIN = VC(MAX) Pins 6, 7 Open; Note CF =1 µF, VIN = 0.35V Note 1 Test Conditions

IOL IOH SENSE Input VTH(SENSE) FAULT Output VOL tMP tSTARTUP tDIAG
SENSE Input Threshold Voltage with Respect to GND
Output Low Voltage Missing Pulse Detector Timer Start-up Timer Diagnostic Timer

 

Some Part number from the same manufacture Microchip Technology, Inc.
TC646EUA The TC646 is a Switch Mode Fan Speed Controller For Use With Brushless DC Motors
TC647 The TC647 is a Switch Mode Fan Speed Controller For Use With Brushless DC Motors
TC647B The TC642B is a Version of The Existing TC642 Fan Speed Controller
TC647E The TC647 is a Switch Mode Fan Speed Controller For Use With Brushless DC Motors
TC647EPA PWM Fan Speed Controller With Fansense Technology
TC647EUA The TC647 is a Switch Mode Fan Speed Controller For Use With Brushless DC Motors
TC648 The TC648 is a Switch Mode Fan Speed Controller For Use With Brushless DC Motors
TC648B The TC646B is a Version of The Existing TC646 Fan Speed Controller
TC648E The TC648 is a Switch Mode Fan Speed Controller For Use With Brushless DC Motors
TC649 The TC649 is a Switch Mode Fan Speed Controller For Use With Brushless DC Motors
TC649B The TC646B is a Version of The Existing TC646 Fan Speed Controller
TC649E The TC649 is a Switch Mode Fan Speed Controller For Use With Brushless DC Motors
TC649EPA PWM Fan Speed Controller With Auto-shutdown And Fansense Technology
TC649EUA The TC649 is a Switch Mode Fan Speed Controller For Use With Brushless DC Motors
TC650 The TC650/651 Are Integrated Temperature Sensors And Brushless DC Fan Speed Controllers
TC6501 The TC6501 Through TC6504 Are SOT-23 Temperature Switches That Require no External Components And The Design is Facilitated With Factory Programmed Temperature Thresholds
TC6501N015VCTTR The TC650/651 Are Integrated Temperature Sensors And Brushless DC Fan Speed Controllers
TC6501P045VCT The TC6501 Through TC6504 Are SOT-23 Temperature Switches That Require no External Components And The Design is Facilitated With Factory Programmed Temperature Thresholds
TC6501P045VCTTR The TC650/651 Are Integrated Temperature Sensors And Brushless DC Fan Speed Controllers
TC6501P065VCT The TC6501 Through TC6504 Are SOT-23 Temperature Switches That Require no External Components And The Design is Facilitated With Factory Programmed Temperature Thresholds
TC6501P065VCTTR The TC650/651 Are Integrated Temperature Sensors And Brushless DC Fan Speed Controllers
Same catergory

AD1403A : 2.5V. Low Cost, Precision 2.5 V ic References. Improved, Lower Cost, Replacements for Standard 1403A 3-Terminal Device: Voltage In/Voltage Out Laser Trimmed to High Accuracy: mV (AD1403A) Excellent Temperature Stability: 25 ppm/ C (AD1403A) Low Quiescent Current: 1.5 mA max 10 mA Current Output Capability Low Cost Convenient Mini-DIP Package The AD1403 and AD1403A are improved three-terminal, low cost,.

BA6246 : Reversible Motor Driver. The BA6247, BA6247N and BA6247FP-Y are monolithic ICs incorporating two reversible-motor drivers. The ICs differ in the control logic and output mode. F 1) Two reversible-motor drivers in each unit. 2) Built-in thermal shutdown circuit. 3) Output voltage can be set arbitrarily. 4) Available in a compact SIP10pin package a HSIP10pin package with radiation.

CQ2320-7R : 60132 Watt DC-DC Converters. Input voltage ranges or 2 isolated outputs kV AC I/O electric strengh test voltage Extremely slim case (4TE wide), fully enclosed Extremely low inrush current, hot swappable Operating ambient temperaturerange ­4071 °C with convection cooling Options Options Input voltage Inrush current ETS 300 132-2 refer to selection chart typ. 40 A Efficiency Output.

FM1001-7R : 50 Watt DC-DC Converters. Wide input voltage from or 3 isolated outputs kV AC I/O electric strength test voltage Rugged electrical and mechanical design Outputs individually controlled with excellent dynamic properties Operating ambient temperature range ­4071 °C Output 1 Output 2 Uo nom Io nom Uo nom Io nom [V DC] [A] [V DC] [A] Output 1 Output 2 Uo nom Io nom Uo nom Io nom [V DC] [A] [V DC] [A] Output.

LD1086D2M : 1.25 to 28V - Adjustable Low Drop Regulator. 1.5A LOW DROP POSITIVE VOLTAGE REGULATOR ADJUSTABLE AND FIXED TYPICAL DROPOUT AT 1.5A THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 9V, 12V. GUARANTEED OUTPUT CURRENT TO 1.5A OUPUT TOLERANCE AT 25°C AND ħ2% IN FULL TEMPERATURE RANGE INTERNAL POWER AND THERMAL LIMIT WIDE OPERATING TEMPERATURE RANGE TO 125°C PACKAGE AVAILABLE D2PAK, D2PAK/A, DPAK.

LT337 : Negative Adjustable Regulator.

MC33166 : Power Switching Regulator. The MC34166, MC33166 series are high performance fixed frequency power switching regulators that contain the primary functions required for dc­to­dc converters. This series was specifically designed to be incorporated in step­down and voltage­inverting configurations with a minimum number of external components and can also be used cost effectively.

S3843 : PWM. Power Supply Controller , PWM. The S3843 is fixed Current PWM controller for Off-line and DC-DC converter applications. The internal circuits feature a trimmed oscillator for precise duty cycle control, a temperature compensated reference, high gain error amplifier current sensing comparator, and a high current totempole output for driving a power MOSFET. Protection circuitly includes.

SI-3120N : Linear Regulator. Compact full-mold package (equivalent to TO220) Output current: 1.0A Low dropout voltage: VDIF1V (at IO=1.0A) Built-in foldback overcurrent, overvoltage, thermal protection circuits For stabilization of the secondary stage of switching power supplies Electronic equipment Parameter DC Input Voltage DC Output Current Power Dissipation Junction Temperature.

SPF5002A : . q DMOS 4ch output q Allows ON/OFF using C-MOS logic level q Built-in overcurrent, overvoltage and thermal protection circuits Parameter Power supply voltage Output terminal voltage Input terminal voltage Output current Power Dissipation Storage temperature Channel temperature Output avalanche capability Parameter Power supply voltage Quiescent circuit.

ST778 : Low Voltage Input, 3-3.3v/5v/adjustable Output DC-DC Converter With Synchronous Rectifier.

tk11840l : Panel Driver. Panel Capacitance = PWM Switching Regulator Controller ic ;; Package = SOT23L-8.

TK65430 : Step-down Converter With Battery Monitor. STEP-DOWN CONVERTER WITH BATTERY MONITOR APPLICATIONS Battery Powered Systems Cellular Telephones Pagers Personal Communications Equipment Radio Controlled Systems Toys s Minimum External Component Count (1 coil, 1 cap) s Miniature 6 Pin SOT23L-6 Surface Mount Package To 95% Efficient Extremely Low Operating Current (24 µA) Low Quiescent Current (18 µA) Low Ripple.

UC382T-2 : ti UC382-2, Fast Transient Response 3 Ampere Low Dropout (LDO) Regulator.

R1515x : The R1515x series are CMOS-based positive voltage regulator (VR) ICs. The R1515xxxxxx has of high input voltage operating, high output voltage accuracy and ultra-low supply current. A peak current limit circuit, a short current limit circuit, and a thermal shutdown circuit are built in the R1515x series. The regulator output voltage is fixed in the R1515xxxxB.

NDTD0503C : 5V And 12V Versions Broaden Offering Of Low-Profile Isolated Output DC/DC Converters Murata Power Solutions has added 5V and 12V input voltage versions to its NDTS and NDTD series of isolated DC/DC converters. The range extension means that over 100 versions, offering different input and voltage choices in industry standard footprint configurations,.

 
0-C     D-L     M-R     S-Z