Details, datasheet, quote on part number: TC6504P005VCT
PartTC6504P005VCT
CategorySensors => Temperature Sensors
DescriptionThe TC6501 Through TC6504 Are SOT-23 Temperature Switches That Require no External Components And The Design is Facilitated With Factory Programmed Temperature Thresholds
CompanyMicrochip Technology, Inc.
DatasheetDownload TC6504P005VCT datasheet
Quote
Find where to buy
 
  

 

Features, Applications
Features

5-Pin SOT-23A Factory Programmed Thresholds from in 10C Increments Pin Selectable or +10C Hysteresis 0.5C (Typ) Threshold Accuracy Over Full Temperature Range No External Components Required 17 A Supply Current (Typ)

The TC6501/2/3/4 are SOT-23 temperature switches that require no external components and are available with factory programmed temperature thresholds. A choice of factory trimmed temperature trip points are also available. Pin selectable hysteresis or +10C allows flexibility to the design of the application. These parts typically consume only A of current and operate over the entire to +135C temperature range, while offering accuracies of 0.5C (typ). The TC6501 and TC6503 have an open-drain, activelow output, which targets microcontroller reset control. The TC6502 and TC6504 have a CMOS, active-high output designed to drive the logic level MOSFET that turns on a fan or heater element. The TC6501/TC6502 are designed for hot temperature monitoring to +125C). These devices assert a logic signal when the temperature goes above the threshold. The TC6503/TC6504 are optimized for cold temperature monitoring to +15C) and assert a logic signal when the temperature goes below the threshold. The TC6501/2/3/4 are offered with five standard temperature thresholds. Available 5-Pin SOT-23A packages, these parts are ideal for applications requiring high integration, small size, low power and low installed cost.

Ultra Small Temperature Switches with Pin Selectable Hysteresis
Applications

Thermal Management in PCs and Servers Over-Temperature Fail Safe Circuits Simple Fan Controller Temperature Alarms Projectors/Printers Notebook Computers Network Boxes

* Notice: Stresses above those listed under "Maximum Ratings" may cause permanent damage to the device. This a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.

Supply Voltage (VCC).............................. to +7V Input Current (All Pins).......................................20 mA Output Current (All Pins)....................................20 mA Operating Temperature Range.......... to +135C Storage Temperature Range............. to +165C TOVER to +7V TOVER -0.3V to (VCC + 0.3V) TUNDER to 7V TUNDER -0.3V to (VCC + 0.3V) All Other Pins............................. -0.3V to (VCC + 0.3V) Maximum Junction Temperature, TJ.................. 150C Power Dissipation (TA = +70C): (Derate 7.1 mW/C Above +70C)...............570 mW

Electrical Characteristics: Unless otherwise noted, VCC +5.5V, R PULL-UP k (TC6501/TC6503 only), 100 pF decoupling capacitor from CC to GND, TAMB to +135C. Typical values are = +25C. Parameter Supply Voltage Range Supply Current HYST Input Threshold HYST Input Threshold Temperature Threshold Accuracy (Note 1) Symbol V CC ICC VIH V IL TTH Min 0.8 x VCC Temperature Threshold Hysteresis Output Voltage High THYST VOH 0.8 x VCC - 1.5 Output Voltage Low Open-Drain Output Leakage Current VOL Typ Max 0.2 x VCC Unit to +125C HYST = GND HYST = VCC ISOURCE = 500 A, VCC 2.7V (TC6502/TC6504 Only) ISOURCE = 800 A, VCC 4.5V (TC6502/TC6504 Only) ISINK = 1.2 mA, VCC > 2.7V ISINK = 3.2 mA, VCC > 4.5V VCC = 2.7V, TUNDER 5.5V (TC6503); TOVER 5.5V (TC6501) Test Conditions

Note 1: The TC6501/2/3/4 are available with internal, factory programmed temperature trip thresholds from in +10C increments.

The graphs and tables provided following this note are a statistical summary based on a limited number of samples and are provided for informational purposes only. The performance characteristics listed herein are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified operating range (e.g., outside specified power supply range) and therefore outside the warranted range. Unless otherwise noted, VCC = 5.0V, RPULL-UP k (TC6501/TC6503 only), 100 pF decoupling capacitor from VCC to GND, TAMB = +25C.


FIGURE 2-3: Thermal Step Response in Perfluorinated Fluid (SOT-23).

 

Related products with the same datasheet
TC6501P045VCT
TC6501P065VCT
TC6501P075VCT
TC6501P095VCT
TC6501P105VCT
TC6501P115VCT
TC6501P125VCT
TC6502
TC6502P045VCT
TC6502P065VCT
TC6502P075VCT
TC6502P095VCT
Some Part number from the same manufacture Microchip Technology, Inc.
TC6504P005VCTTR The TC650/651 Are Integrated Temperature Sensors And Brushless DC Fan Speed Controllers
TC652 The TC652/653 Are Integrated Temperature Sensors And Brushless DC Fan Speed Controllers With FanSense™ Technology
TC654 The TC654 is a Dual PWM Mode Fan Speed Controller With Fansense TM Technology For Use With Brush-less DC Motors
TC664 The TC664 is a Single PWM Mode Fan Speed Controller With Fansense TM Technology For Use With Brush-less DC Motors
TC670 The TC670 is an Integrated Fan Speed Sensor That Predicts And/or Detects Fan Failure, Preventing Thermal Damage to Systems With Cooling Fans
TC682
TC7106 The TC7106A And TC7107A 3-1/2 Digit Direct-display Drive Analog-to-digital Converters Allow Existing 7106/7107 Based Systems to be Upgraded
 
0-C     D-L     M-R     S-Z