Details, datasheet, quote on part number: TC7129
PartTC7129
CategoryData Conversion => DAC (Digital to Analog Converters) => Display A/D Converters
TitleDisplay A/D Converters
DescriptionThe TC7129 is a 4-1/2 Digit Analog-to-digital Converter (ADC)that Directly Drives a Multiplexed Liquid Crystal Display (LCD)
CompanyMicrochip Technology, Inc.
DatasheetDownload TC7129 datasheet
Cross ref.Similar parts: ICL7129A
Quote
Find where to buy
 
  

 

Features, Applications
4-1/2 Digit Analog-to-Digital Converters with On-Chip LCD Drivers
Features

Count Resolution: 19,999 Resolution on 200mV Scale: 10V True Differential Input and Reference Low Power Consumption: at 9V Direct LCD Driver for 4-1/2 Digits, Decimal Points, Low Battery Indicator, and Continuity Indicator Over Range and Under Range Outputs Range Select Input: 10:1 High Common Mode Rejection Ratio: 110dB External Phase Compensation Not Required

The a 4-1/2 digit analog-to-digital converter (ADC) that directly drives a multiplexed liquid crystal display (LCD). Fabricated in high performance, low power CMOS, the TC7129 ADC is designed specifically for high resolution, battery powered digital multimeter applications. The traditional dual slope method of A/D conversion has been enhanced with a successive integration technique to produce readings accurate to better than 0.005% of full scale, and resolution down to 10V per count. The TC7129 includes features important to multimeter applications. It detects and indicates low battery condition. A continuity output drives an annunciator on the display, and can be used with an external driver to sound an audible alarm. Over range and under range outputs and a range change input provide the ability to create auto-ranging instruments. For snapshot readings, the TC7129 includes a latch-and-hold input to freeze the present reading. This combination of features makes the TC7129 the ideal choice for full featured multimeter and digital measurement applications.

Applications
Full Featured Multimeters Digital Measurement Devices

Package Code TC7129CKW TC7129CLW Pin Layout Normal Formed Package 40-Pin PDIP 44-Pin PQFP 44-Pin PLCC Temperature Range to +70C



*Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operation sections of the specifications is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability.

Supply Voltage (V+ to V-)....................................... 15V Reference Voltage (REF HI or REF LO)......... V+ to VInput Voltage (IN or IN LO) (Note V+ to VVDISP.......................................... V+ to (DGND 0.3V) Digital Input (Pins DGND to V+ Analog Input (Pins V+ to VPackage Power Dissipation (TA 70C) Plastic DIP..................................................... 1.23W PLCC............................................................. 1.23W Plastic QFP.................................................... 1.00W Operating Temperature Range............... to +70C Storage Temperature Range.............. to +150C

Electrical Characteristics: = 9V, VREF = +25C, fCLK = 120kHz, unless otherwise indicated. Pin numbers refer to 40-pin DIP. Symbol Input Zero Input Reading Zero Reading Drift Ratiometric Reading Range Change Accuracy RE NL CMRR CMVR eN IIN Rollover Error Linearity Error Common Mode Rejection Ratio Common Mode Voltage Range Noise (Peak-to-Peak Value not Exceeded 95% of Time) Input Leakage Current Scale Factor Temperature Coefficient Power VCOM Common Voltage Common Sink Current Common Source Current DGND Digital Ground Voltage Sink Current Supply Voltage Range IS Supply Current Excluding Common Current V+ to Pin 28 Common = +0.1V Common V+ to Pin = 9V DGND V+ to VV+ = 9V (V-) + 1.5 (V+) Counts V/C Counts Ratio Counts dB V VP-P pA ppm/C VIN 0V, 200mV Scale VIN < +70C VIN = VREF = 1000mV, Range = 2V VIN 1V on High Range, VIN 0.1V on Low Range VIN- = VIN+ 199mV 200mV Scale VCM = 1V, VIN 0V, 200mV Scale VIN 0V 200mV Scale VIN 0V 200mV Scale VIN = 0V, Pins 32, 33 VIN < +70C External VREF = 0ppm/C Parameter Min Typ Max Unit Test Conditions

Note 1: Input voltages may exceed supply voltages, provided input current is limited to 400A. Currents above this value may result in invalid display readings, but will not destroy the device if limited to 1mA. Dissipation ratings assume device is mounted with all leads soldered to printed circuit board.


 

Related products with the same datasheet
TC7129CKW
TC7129CLW
TC7129CPL
Some Part number from the same manufacture Microchip Technology, Inc.
TC7129CKW 4-1/2 Digit Analog-to-digital Converters With On-chip LCD Drivers<<<>>>the TC7129 is a 4-1/2 Digit Analog-to-digital Converter<<<>>>(ADC) That Directly Drives a Multiplexed Liquid Crystal<<<>>>display
TC7129CKW The TC7129 is a 4-1/2 Digit Analog-to-digital Converter (ADC)that Directly Drives a Multiplexed Liquid Crystal Display (LCD)
TC7129CLP -
TC7129CLW 4-1/2 Digit Analog-to-digital Converters With On-chip LCD Drivers<<<>>>the TC7129 is a 4-1/2 Digit Analog-to-digital Converter<<<>>>(ADC) That Directly Drives a Multiplexed Liquid Crystal<<<>>>display
TC7129CLW The TC7129 is a 4-1/2 Digit Analog-to-digital Converter (ADC)that Directly Drives a Multiplexed Liquid Crystal Display (LCD)
TC7129CPL 4-1/2 Digit Analog-to-digital Converters With On-chip LCD Drivers<<<>>>the TC7129 is a 4-1/2 Digit Analog-to-digital Converter<<<>>>(ADC) That Directly Drives a Multiplexed Liquid Crystal<<<>>>display
TC7129CPL The TC7129 is a 4-1/2 Digit Analog-to-digital Converter (ADC)that Directly Drives a Multiplexed Liquid Crystal Display (LCD)
TC7135 The TC7135 4-1/2 Digit Analog-to-digital Converter (ADC) Offers 50 PPM (1 Part in 20,000)resolution With a Maximum Nonlinearity Error of 1 Count
TC7136 The TC7136 And TC7136A Are Low-power,3-1/2 Digit With Liquid Crystal Display (LCD)drivers With Analog-to-digital Converters
TC7136A
TC7136CKW
TC72 The TC72 is a Digital Temperature Sensor Capable of Reading Temperatures From -55°C to +125°C
TC74 The TC74 is a Serially Accessible Digital Temperature Sensor Particularly Suited For Low Cost And Small Form-factor Applications
TC74A0-33VAT Tiny Serial Digital Thermal Sensor
TC74A0-5.0VAT The TC74 is a Serially Accessible Digital Temperature Sensor Particularly Suited For Low Cost And Small Form-factor Applications
TC74A0-50VAT Tiny Serial Digital Thermal Sensor
TC74A1-3.3VAT The TC74 is a Serially Accessible Digital Temperature Sensor Particularly Suited For Low Cost And Small Form-factor Applications
TC74A1-33VAT Tiny Serial Digital Thermal Sensor
TC74A1-5.0VAT The TC74 is a Serially Accessible Digital Temperature Sensor Particularly Suited For Low Cost And Small Form-factor Applications
TC74A1-50VAT Tiny Serial Digital Thermal Sensor
TC74A2-3.3VAT The TC74 is a Serially Accessible Digital Temperature Sensor Particularly Suited For Low Cost And Small Form-factor Applications
Same catergory

AD678 : 12-Bit 200 KSPS Complete Sampling ADC. AC and DC Characterized and Specified (K, B and T Grades) 200k Conversions per Second 1 MHz Full Power Bandwidth 500 kHz Full Linear Bandwidth 72 dB S/N+D (K, B, T Grades) Twos Complement Data Format (Bipolar Mode) Straight Binary Data Format (Unipolar Mode) 10 M Input Impedance or 16-Bit Bus Interface On-Board Reference and Clock 10 V Unipolar or Bipolar.

ADS5121 : Low Power, 8 Channel, 10-bit, 40MSPS ADC, 1.8V. q 8 DIFFERENTIAL ANALOG INPUTS q 1VPP DIFFERENTIAL INPUT RANGE q INT/EXT VOLTAGE REFERENCE q ANALOG/DIGITAL SUPPLY: 1.8V q DIGITAL I/O SUPPLY: 1.8V/3.3V q DIFFERENTIAL NONLINEARITY: 0.4LSB q INTEGRAL NONLINEARITY: 0.6LSB q SIGNAL-TO-NOISE: 60dB at fIN 20MHz q POWER DISSIPATION: 500mW q INDIVIDUAL CHANNEL POWER-DOWN 257-LEAD, 0.8 BALL PITCH, PLASTIC.

ADS7822B : 12-bit High Speed 2.7v Micropower Sampling Analog-to-digital Converter.

DAC7741Y/250 : ti DAC7741, 16-Bit, Single Channel, Digital-to-analog Converter W/internal +10V Reference And Parallel I/f.

HA22032T : GAAS Mmic Down Converter For Micro Wave Application. GaAs MMIC Down Converter for Micro Wave Application Suitable for down converter of Micro Wave Application(1.5 GHz) Low voltage and low current operation 9 mA typ.) Low noise (2 dB typ. @1.5 Ghz) High power gain (26 dB typ. @1.5 GHz) Builtin matching circuits (50 ) Small surface mount package (TSSOP-8) This document may, wholly or partially, be subject.

LM3940WG-3.3-QML : 1a Low Dropout Regulator For 5v to 3.3v Conversion. The a 1A low dropout regulator designed to provide 3.3V from a 5V supply. The LM3940 is ideally suited for systems which contain both 5V and 3.3V logic, with prime power provided from a 5V bus. Because the is a true low dropout regulator, it can hold its 3.3V output in regulation with input voltages as low as 4.5V. The T0-220 package of the LM3940 means.

MB40768H : D/A Converter ( 1-ch, 8-bit, 60 MSPS ). The is a low-power and high-speed 8-bit D/A converter. The digital input is TTL compatible and the analog output voltage 5 V. Maximum conversion speed is 60 MHz. The internal reference voltage provided has two types of resistor division scheme and band-gap reference scheme; the external reference voltage may also be used. The MB40768H is suitable for high-definition.

MSC1211Y2PAGR : MicroSystem Mixed-Signal Data Converters. ti MSC1211Y2, 8051 Cpu With 4kB Memory, I2C, 24-Bit ADC, And Quad 16-Bit DACs.

nDA10200-18 : Digital to Analog Converter ip. Complementary current output Update rate: 200MSPS Low power (max 36mW@1.8V) 1.8V power supply SFDR > 70dB for (fin = 5MHz) Internal voltage reference Adjustable full-scale current Edge-triggered input latches Small footprint (0.38mm2) APPLICATIONS Communications transmit channel: W-CDMA Direct IF synthesis Base stations Direct digital synthesis Digital.

NJU9214 : 4·3/4 Digit Single Chip Digital Multimeter Lsi. The a 43/4 digits single chip digital multimeter LSI with 42 segments bargraph display. The NJU9214 realizes high precision of 40,000 counts measurement by the NJRC original dual-slope to D converter and realizes also quick response bargragh display and auto-ranging by another high speed dual-slope to D converter. The input attenuator part is simplified.

PCM1608 : . 24-Bit, 192kHz Sampling, 8-Channel, Enhanced Multilevel, Delta-Sigma DIGITAL-TO-ANALOG CONVERTER q 24-BIT RESOLUTION q ANALOG PERFORMANCE: Dynamic Range: 100dB typ (PCM1608Y) 105dB typ (PCM1608KY) SNR: 100dB typ (PCM1608Y) 105dB typ (PCM1608KY) THD+N: 0.003% typ (PCM1608Y) 0.002% typ (PCM1608KY) Full-Scale Output: 3.1Vp-p typ q 4x/8x OVERSAMPLING INTERPOLATION.

TDA8718 : TDA8718; 8-bit High-speed Analog-to-digital Converter. Product Supersedes data of April 1993 File under Integrated Circuits, IC02 June 1994 8-bit resolution Sampling rate to 600 MHz ECL (100K family) compatible for digital inputs and outputs Overflow/Underflow output 50 load drive capability Low input capacitance (5 pF typ.). APPLICATIONS High speed analog-to-digital conversion Industrial instrumentation.

AD7691 : 18-Bit, 1.5 LSB INL, 250 kSPS PulSAR Differential ADC in MSOP/QFN 18-Bit, 1.5 LSB INL, 250 kSPS PulSAR Differential ADC in MSOP/QFN Product The AD7691 is an 18-bit, charge redistribution, successive approximation, analog-to-digital converter (ADC) that operates from a single power supply, VDD, between 2.3 V and 5 V. It contains a low power, high speed,.

PCM1691 : 24-bit 192 KHz 8ch Audio DAC With Single-Ended Output The PCM1691 is a high-performance, single-chip, 24-bit, eight-channel, audio digital-to-analog converter (DAC) with single-ended outputs. The eight-channel, 24-bit DAC employs an enhanced multi-level, delta-sigma () modulator, and supports 8-kHz to 192-kHz sampling rates and a 16-/20-/24-/32-bit.

ADS1013 : 12-Bit ADC With Integrated Oscillator, And Reference The ADS1013, ADS1014, and ADS1015 are precision analog-to-digital converters (ADCs) with 12 bits of resolution offered in an ultra-small, leadless QFN-10 package or an MSOP-10 package. The ADS1013/4/5 are designed with precision, power, and ease of implementation in mind. The ADS1013/4/5 feature an onboard.

 
0-C     D-L     M-R     S-Z