Details, datasheet, quote on part number: TC7135CPI
PartTC7135CPI
CategoryData Conversion => ADC (Analog to Digital Converters) => BCD Output A/D
TitleBCD Output A/D
DescriptionThe TC7135 4-1/2 Digit Analog-to-digital Converter (ADC) Offers 50 PPM (1 Part in 20,000)resolution With a Maximum Nonlinearity Error of 1 Count
CompanyMicrochip Technology, Inc.
DatasheetDownload TC7135CPI datasheet
Cross ref.Similar parts: ICL7135CPIZ, ICL7135CPI, TLC7135CN
Quote
Find where to buy
 
  

 

Features, Applications
Features

Low Rollover Error: 1 Count Max Nonlinearity Error: 1 Count Max Reading for 0V Input True Polarity Indication at Zero for Null Detection Multiplexed BCD Data Output TTL-Compatible Outputs Differential Input Control Signals Permit Interface to UARTs and Microprocessors Blinking Display Visually Indicates Overrange Condition Low Input Current: 1pA Low Zero Reading Drift: 2V/C Auto-Ranging Supported with Overrange and Underrange Signals Available in PDIP and Surface-Mount Packages

The TC7135 4-1/2 digit A/D converter (ADC) offers 50ppm (1 part in 20,000) resolution with a maximum nonlinearity error of 1 count. An auto zero cycle reduces zero error to below 10V and zero drift to 0.5V/C. Source impedance errors are minimized a 10pA maximum input current. Rollover error is limited to 1 count. Microprocessor based measurement systems are supported by BUSY, STROBE and RUN/HOLD control signals. Remote data acquisition systems with data transfer via UARTs are also possible. The additional control pins and multiplexed BCD outputs make the TC7135 the ideal converter for display or microprocessor based measurement systems.

Applications
Precision Analog Signal Processor Precision Sensor Interface High Accuracy DC Measurements

Part Number TC7135CPI TC7135CBU Package 28-Pin PLCC 28-Pin PDIP 64-Pin PQFP Temperature Range to +70C

REF IN OVERRANGE 3 ANALOG STROBE COMMON Analog GND 4 RUN/HOLD INT OUT 0.47F 5 DIGTAL GND IN 6 BUFF OUT POLARITY 100k 7 CLOCK C 100 Signal 1F 8 REF k BUSY Input CREF+ 9 -INPUT (LSD) 10 D2 +INPUT 12 D5 (MSD) 13 B1 (LSB) (MSB) B2 B4

VREF IN ANALOG COM INT OUT 25 RUN/HOLD 24 DIGTAL GND 23 POLARITY AZ IN BUFF OUT C REFCREF+ INPUT

Positive Supply Voltage..........................................+6V Negative Supply Voltage....................................... - 9V Analog Input Voltage (Pin to V- (Note 2) Reference Input Voltage (Pin V+ to VClock Input Voltage........................................ to V+ Operating Temperature Range............... to +70C Storage Temperature Range............ to +150C Package Power Dissipation; (TA 70C) 28-Pin PDIP..................................... 1.14 28-Pin PLCC.................................... 64-Pin PQFP.....................................1.14

*Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operation sections of the specifications is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability.

Electrical Characteristics: = +25C, FCLOCK = -5V, unless otherwise specified (see Functional Block Diagram). Symbol Parameter Min Typ Max Unit Test Conditions

Display Reading with Zero Volt Input FS NL DNL FSE IIN eN Digital IIL IIH VOL V OH Input Low Current Input High Current Output Low Voltage Output High Voltage; 1 D5 Busy, Polarity, Overrange, Underrange, Strobe Clock Frequency Zero Reading Temperature Coefficient Full Scale Temperature Coefficient Nonlinearity Error Differential Linearity Error Display Reading in Ratiometric Operation Full Scale Symmetry Error (Rollover Error) Input Leakage Current Noise Display Reading Note 2 and Note 3 VIN = 0V, (Note 4) VIN = 2V, (Note 4 and Note 5) Note 6 Note 6 VIN = VREF, (Note 2) -VIN = +VIN, (Note 7) Note 3 Peak-to-Peak Value not Exceeded 95% of Time VIN = 0V VIN = +5V IOL = 1.6mA IOH = 1mA IOH = 10A

Limit input current to under 100A if input voltages exceed supply voltage. Full scale voltage = 2V. VIN TA +70C.External reference temperature coefficient less than 0.01ppm/C. -2V VIN +2V. Error of reading from best fit straight line. IVIN| = 1.9959. Specification related to clock frequency range over which the TC7135 correctly performs its various functions. Increased errors result at higher operating frequencies.


 

Related products with the same datasheet
TC7135CBU
TC7135CLI
Some Part number from the same manufacture Microchip Technology, Inc.
TC7136 The TC7136 And TC7136A Are Low-power,3-1/2 Digit With Liquid Crystal Display (LCD)drivers With Analog-to-digital Converters
TC7136A
TC7136CKW
TC72 The TC72 is a Digital Temperature Sensor Capable of Reading Temperatures From -55°C to +125°C
TC74 The TC74 is a Serially Accessible Digital Temperature Sensor Particularly Suited For Low Cost And Small Form-factor Applications
TC74A0-33VAT Tiny Serial Digital Thermal Sensor
TC74A0-5.0VAT The TC74 is a Serially Accessible Digital Temperature Sensor Particularly Suited For Low Cost And Small Form-factor Applications
TC74A0-50VAT Tiny Serial Digital Thermal Sensor
TC74A1-3.3VAT The TC74 is a Serially Accessible Digital Temperature Sensor Particularly Suited For Low Cost And Small Form-factor Applications
TC74A1-33VAT Tiny Serial Digital Thermal Sensor
TC74A1-5.0VAT The TC74 is a Serially Accessible Digital Temperature Sensor Particularly Suited For Low Cost And Small Form-factor Applications
TC74A1-50VAT Tiny Serial Digital Thermal Sensor
TC74A2-3.3VAT The TC74 is a Serially Accessible Digital Temperature Sensor Particularly Suited For Low Cost And Small Form-factor Applications
TC74A2-33VAT Tiny Serial Digital Thermal Sensor
TC74A2-5.0VAT The TC74 is a Serially Accessible Digital Temperature Sensor Particularly Suited For Low Cost And Small Form-factor Applications
TC74A2-50VAT Tiny Serial Digital Thermal Sensor
TC74A3-3.3VAT The TC74 is a Serially Accessible Digital Temperature Sensor Particularly Suited For Low Cost And Small Form-factor Applications
TC74A3-33VAT Tiny Serial Digital Thermal Sensor
TC74A3-5.0VAT The TC74 is a Serially Accessible Digital Temperature Sensor Particularly Suited For Low Cost And Small Form-factor Applications
TC74A3-50VAT Tiny Serial Digital Thermal Sensor
TC74A4-3.3VAT The TC74 is a Serially Accessible Digital Temperature Sensor Particularly Suited For Low Cost And Small Form-factor Applications
 
0-C     D-L     M-R     S-Z