|
|
Part: 53111-1ZA
Category:
Discrete
-> Solid State relays
Description: Ac/dc DSCC #5962-9314001/02, Equivalent to HSSR 7111
Company: Micropac Industries, Inc.
Datasheet: Download 53111-1ZA datasheet File size : 83 kB
Request For quote: Find where to buy 53111-1ZA
Datasheet text preview:
53111
POWER MOSFET OPTOCOUPLER,
90 V/1 , Hermetically Sealed, DSCC Approved 5962-9314001 and 5962-9314002
Mii
MICROCIRCUITS PRODUCTS DIVISION
Features:
Applications:
· · · · · · · · · · · ·
Hermetically Sealed 8-Pin Dual-In-Line package Small Size and Weight Options: 5mA or 10mA input forward current Performance Guaranteed over 55°C to +125°C Ambient Temperature Range AC/DC Signal & Power Switching Maximum Average Current AC/DC: 0.8 A DC only: 1.6 A 1500 VDC Withstand Test Voltage High Transient Immunity 5 A Output Surge Current Shock and Vibration Resistant MIL-PRF-38534 Compliant Equivalent to HSSR7111/7112
· · · ·
· ·
Satellite/Space Systems Military/High Reliability Systems Standard 28 VDC and 48 VDC Load Driver Standard 24 VAC Load Driver AC/DC Electromechanical and Solid State Relay Replacement I/O Modules
DESCRIPTION
The 53111 is a single channel, hermetically sealed, power MOSFET optocoupler. Low on-resistance of the MOSFET output, combined with 1500 VDC isolation between input and output, makes this optocoupler ideal for solid state relay applications. Operation is specified over the full military temperature range. The part is supplied in an eight-pin, dual-in-line ceramic package, available as COTS, as fully compliant MIL-PRF-38534 Class H device, or with custom screening. Lead options support both through-hole and surface-mount assembly. The part is normally shipped with gold plated leads, but lead finishes per MIL-PRF-38534 are available. Functionally, the device operates as a single-pole, normally open (1 Form A) solid state relay. The device is actuated by an input current, which can be supplied from standard logic types such as open-collector TTL. The input current biases a light emitting diode that is optically coupled to an integrated photovoltaic diode array. The photovoltaic array powers control circuitry that operates the output MOSFETs. Optimum switching of either AC or DC loads is provided by a configurable output. For AC loads, connection A in Figure 1 must be used. Connection A will also switch DC loads but connection B, in Figure 1, provides DC-only operation with the advantages of substantial reduction in on-resistance and twice the output current capability as that obtained with connection A.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION · 905 E. Walnut St., Garland, TX 75040 · (972) 272-3571 · Fax (972) 494-2281 E-MAIL: hybridsales@micropac.com 5/22/02 www.micropac.com
Pg. 1 of 11
53111 Power MOSFET Optocoupler ___________________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS Storage Temperature Range ......... -65°C to +150°C Operating Ambient Temperature - TA ........... -55°C to +125°C Junction Temperature - TJ ....... 150°C Operating Case Temperature - TC ............+145°C (1) Lead Solder Temperature (1.6mm below seating plane)........ 260°C for 10s Average Input Current - IF .......20 mA Peak Repetitive Input Current - IFpk ...(Pulse Width < 100ms; duty cycle < 50%) .....40 mA Peak Surge Input Current - IFPK surge...(Pulse Width < 0.2ms; duty cycle < 0.1%).......100 mA Reverse Input Voltage - VR ... 5 V Average Output Current Connection A IO........... 0.8 A Connection B - IO ........... 1.6 A Single Shot Output Current - Figure 4 Connection A - IOpk surge...(Pulse width < 10ms) ............ 5 A Connection B - IOpk surge...(Pulse width < 10ms) .......... 10 A Output Voltage Connection A - VO .......... -90 V to +90 V Connection B - VO ............. 0 V to +90 V Average Output Power Dissipation - Figure 5 ........... 800 mW (2)
RECOMMENDED OPERATING CONDITIONS: PARAMETER Input Current (on) Input Voltage (off) Operating Temperature SYMBOL IF (ON) VF (OFF) TA DEVICE TYPE -01 -02 All All MIN 10 5 0 -55 MAX 20 20 0.6 +125 UNITS mA mA VDC °C
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION · 905 E. Walnut St., Garland, TX 75040 · (972) 272-3571 · Fax (972) 494-2281 E-MAIL: hybridsales@micropac.com 5/22/02 www.micropac.com
Pg. 2 of 11
53111
ELECTRICAL SPECIFICATIONS TA = -55°C to +125°C, unless otherwise specified. Parameter Output Withstand Voltage Sym. V O(OFF) Min. 90 Typ.* 110 Max. Units V
Power MOSFET Optocoupler
Test Conditions VF = 0.6 V IO = 10 µA IF = 10 mA (for 01) IF = 5 mA (for 02) IO = 800 mA (pulse duration 30 ms) IF = 10 mA (for 01) IF = 5 mA (for 02) IO = 1.6 A (pulse duration 30 ms) VF = 0.6 V VO = 90 V IF = 10 mA (for 01) IF = 5 mA (for 02) IR = 100 µA RH 45%, t = 5 s VI-O = 1500 VDC TA = 25°C IF = 10 mA (for 01) IF = 5 mA (for 02) VDD = 28 VDC IO = 800 mA IF = 10 mA (for 01) IF = 5 mA (for 02) VDD = 28 VDC IO = 800 mA VPEAK = 50 V CM = 1000 pF CL = 15 pF RM 1 M VDD = 5 V VI-O (PEAK) = 50 V RL = 20 k CL = 15 pF
Notes
Output On-Resistance (Connection A) R (ON) Output On-Resistance (Connection B) Output Leakage Current Input Forward Voltage Input Reverse Breakdown Voltage Input-Output Insulation IO (OFF) VF VR II-O 1.0 5.0
0.40
1.0
3, Figure 1
0.12
0.25
10-4 1.24
10 1.7
µA V V
1.0
µA
4, 5
Turn-On Time
tON
1.25
6.0
ms
Figure 6
Turn-Off time
tOFF
0.02
0.25
ms
Figure 6
Output Transient Rejection
dVO/dt
1000
V/µs
Figure 7
Input-Output Transient Rejection
dVI-O/dt
500
V/µs
Figure 8
* All typical values are at TA = 25ºC, IF (ON) = 10 mA (for -01) or 5 mA (for 02), VF (OFF) = 0.6V unless otherwise specified.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION · 905 E. Walnut St., Garland, TX 75040 · (972) 272-3571 · Fax (972) 494-2281 E-MAIL: hybridsales@micropac.com 5/22/02 www.micropac.com
Pg. 3 of 11
53111
Power MOSFET Optocoupler
TYPICAL CHARACTERISTICS All typical values are at TA = 25°C, IF (ON) = 10mA, VF (OFF) = 0.6V unless otherwise specified. Parameter Symbol Test Conditions VO = 28 V f = 1 MHz IF = 10 mA IO = 0 mA IF = 10 mA VF = 0 V f = 1 MHz VI-O = 0 V f = 1 MHz VI-O = 500 V t = 60 s Typ. Units Notes
Output Off-Capacitance Output Offset Voltage Input Diode Temperature Coefficient Input Capacitance Input-Output Capacitance Input-Output Resistance
CO (OFF) VOS VF /TA CIN C I-O R I-O
145 2 -1.4 20 1.5 1013
pF µV mV/°C pF pF 7 4 4 6
Notes: 1. Maximum junction to case thermal resistance for the device is 15ºC/W, where case temperature, TC, is measured at the center of the package bottom. 2. For rating, see Figure 5. The output power PD rating curve is obtained when the part is handling the maximum average output current IO as shown in Figure 3. 3. During the pulsed RON measurement (IO duration < 30 ms), ambient (TA) and case temperature (TC) are equal. 4. Pins 2 through 3 shorted together and pins 5 through 8 shorted together. 5. This is a momentary withstand test, not an operating condition. 6. VOS is a function of IF and is defined between pins 5 and 8, with pin 5 as the reference. VOS must be measured in a stable ambient (free of temperature gradients). 7. Zero-bias capacitance measured between the LED anode and cathode. CAUTION: Care should be taken not to exceed the maximum output power dissipation, maximum case temperature, and maximum junction temperature when repetitively switching loads.
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION · 905 E. Walnut St., Garland, TX 75040 · (972) 272-3571 · Fax (972) 494-2281 E-MAIL: hybridsales@micropac.com 5/22/02 www.micropac.com
Pg. 4 of 11
53111
Power MOSFET Optocoupler
Case outlines Terminal number
P, X, Y, AND Z Terminal symbol Connection A (AC or DC load) Conneciton B (DC load only) NC V F+ V FNC V O+ NC N OV O+
1 2 3 4 5 6 7 8 NC = No connection
NC V F+ V FNC VONC NC VO+
CONNECTION A AC/DC CONNECTION IO IF + VF 1 8
CONNECTION B DC CONNECTION IO IF + VF 1 8
+
+ VO -
2
7
2
7
VO
3 6
3
6
4
5
4
5
Figure 1 - Terminal Connections
INPUT OFF ON
OUTPUT OFF ON
Figure 2 - Truth Table
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCS PRODUCTS DIVISION · 905 E. Walnut St., Garland, TX 75040 · (972) 272-3571 · Fax (972) 494-2281 E-MAIL: hybridsales@micropac.com 5/22/02 www.micropac.com
Pg. 5 of 11
Others parts begin by 53
53-1
|
|
|
