Details, datasheet, quote on part number: 1N4732A-G
DescriptionSurface Mount 1.0W Glass Zender Diode
CompanyMicrosemi Corporation
DatasheetDownload 1N4732A-G datasheet
Find where to buy


Features, Applications

DESCRIPTION This surface mountable 1 watt Zener diode series is electrically equivalent to the 1N4728A thru 1N4764A registration in the DO-41 equivalent package except that it meets the JEDEC surface mount outline is an ideal selection for applications of high density and low parasitic requirements for voltage regulation. Standard voltage tolerance is 5% with tighter tolerances available down to 1%. With its glass hermetic qualities, it may also be used for high reliability applications when required by a source control drawing (SCD).

IMPORTANT: For the most current data, consult MICROSEMI's website:

Electrically similar to the JEDEC registered 1N4728 thru 1N4764 zener series Zener voltages available to 100V Standard voltage tolerances are 5% with "A" suffix and 10 % with no suffix identification Tight tolerances available in plus or minus or 1% with or D suffix respectively Options for screening in accordance with MIL-PRF19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers. Surface mount equivalents also available to SMAJ4764A and to SMAJ4764A Plastic body axial-leaded Zener equivalents are also available to 1N4764A

Regulates voltage over a broad operating current and temperature range Wide selection from 100 V Leadless package for surface mounting Ideal for high density mounting Nonsensitive to ESD Hermetically sealed glass package Specified capacitance (see Figure 2) Inherently radiation hard per MicroNote 050

Power dissipation C: 1.0 watts (also see derating in Figure 1). Operating and Storage temperature: to +175C Thermal Resistance: 50 C/W junction to end cap, or 130C/W junction to ambient when mounted FR4 PC board (1 oz Cu) with recommended footprint (see last page) Steady-State Power: 1.00 watts at TEC or 1.00 watts < 45C when mounted FR4 PC board and recommended footprint as described for thermal resistance (also see Figure 1) Forward voltage @200 mA: 1.2 volts (maximum) Solder Temperatures: 260 C for 10 s (max)

CASE: Hermetically sealed DO-213AB glass MELF TERMINALS: Leads, tin-lead plated solderable per MIL-STD-750, method 2026 POLARITY: Cathode indicated by band. Diode to be operated with the banded end positive with respect to the opposite end for Zener regulation MARKING: Cathode band only TAPE & REEL optional: Standard per EIA-481-B with 12 mm tape, 1500 per 7 inch reel or 5000 per 13 inch reel (add "TR" suffix to part number) WEIGHT: 0.05 grams See package dimensions & recommended mounting pad on last page

Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

The type numbers shown with an "A" suffix have a +/-5% tolerance on the nominal Zener voltage. Also available with suffix "C" for +/-2%, and "D" for +/-1%, while the absence of a suffix letter denotes 10% tolerance. The Zener impedance is derived from the 60Hz ac voltage, which results when an ac current having an rms value equal 10% of the dc Zener current (IZT or IZK) is superimposed on IZT or IZK. Zener impedance is measured at two points to ensure a sharp knee on the breakdown curve and eliminate unstable units. The reverse surge current is measured at 25oC ambient using a square wave or equivalent sine wave pulse 1/120 second duration superimposed on IZT. Voltage measurements to be performed 90 seconds after application of dc current. This product series has also been previously identified as the MLL4728A thru MLL4764A series. This alternate name may still be used.

Power Derating Curve Where TEC is End Cap Temp and TA is Ambient Temperature FR4 PC board.


Related products with the same datasheet
Some Part number from the same manufacture Microsemi Corporation
1N4732AUR Surface Mount 1.0W Glass Zender Diode
1N754TR Silicon 400 mW Zener Diodes
K3780H1EB1S Silicon Power Rectifier Assemblies Plate Heatsink
1N3041BTR 1 WATT Metal CASE Zener Diodes
JHV3732 HIGH Voltage Rectifier Assembly
1N5946BRLG Metallurgically Bonded Glass Surface Mount 1.5 WATT Zeners
K4380D1EB1S Silicon Power Rectifier Assemblies Plate Heatsink
PTC409P NPN Darlington Transistors
1N3993R 10 WATT Zener Diodes
E2120Z1EB1S Silicon Power Rectifier Assemblies Plate Heatsink
681 Rectifiers Assemblies
K50460H1EB1S Silicon Power Rectifier Assemblies Plate Heatsink
1N4560R 50 Watt Zener Diodes
UMA150CA Ultramite Surface Mount 500 Watt Transient Voltage Suppressor 5.0 to 170 V
APT34N80LC3 Super Junction Mosfet
MS5295 HIGH Reliability Current Regulator Diodes
SM645K Switching Regulator Power Output Stages
1N5274AUR 500 mW Glass Surface Mount Zener Diodes
MVR1545CT 20 AMP Schottky Barrier Rectifiers

CHF15KE16A : Patented Flip Chip Series

JAN1N3673AR : Standard Rectifier (trr More Than 500ns), Package : DO-4

UT251 : Standard Rectifier (trr More Than 500ns), Package : a

JANMSPSMCGLCE100A : 1500 WATT LOW Capacitance Surface Mount Transient Voltage Suppressor

JAN1N4578AURTR-3 : 6.4 Volt Temperature Compensated Zener Reference Diodes

JANTXV1N4626CUR : Silicon 500 mW Zener Diodes

G2180W1EN1S : Silicon Power Rectifier Assemblies Plate Heatsink

JANTXVMVSMCGLCE20A : 1500 WATT LOW Capacitance Surface Mount Transient Voltage Suppressor

RH4572AUR-1-1 : 6.4 Volt Temperature Compensated Zener Reference Diodes

JANTX1N4578UR-3 : Silicon 500 mW Zener Diodes

JAN1N2977C : 10 WATT Zener Diodes

0-C     D-L     M-R     S-Z