|
Details, datasheet, quote on part number:JANTX2N5157
| |
Datasheet text preview:
TECHNICAL DATA
NPN HIGH POWER SILICON TRANSISTOR
Qualified per MIL-PRF-19500/371 Devices 2N3902 2N5157 Qualified Level JAN JANTX
MAXIMUM RATINGS Ratings
Collector-Emitter Voltage Emitter-Base Voltage Collector-Base Voltage Base Current Collector Current Total Power Dissipation
Symbol
VCEO VEBO VCBO IB IC PT Tj, Tstg Symbol RJC
@ TA = +250C (1) @ TC = +750C (2) Operating & Storage Temperature Range
2N3902 2N5157 400 500 5.0 6.0 700 2.0 3.5 5.0 100 -65 to +200 Max. 1.25
Unit
Vdc Vdc Vdc Adc Adc W W 0 C Unit C/W
THERMAL CHARACTERISTICS
Characteristics Thermal Resistance, Junction-to-Case 1) Derate linearly 29 mW/0C for TA > +250C 2) Derate linearly 0.8 mW/0C for TC > +750C
*See Appendix A for Package Outline
TO-3 (TO-204AA)*
0
ELECTRICAL CHARACTERISTICS
Characteristics Symbol Min. Max. Unit
OFF CHARACTERISTICS
Collector-Emitter Cutoff Current VCE = 325 Vdc VCE = 400 Vdc Collector-Emitter Cutoff Current VBE = 1.5 Vdc; VCE = 700 Vdc Emitter-Base Cutoff Current VEB = 5.0 Vdc VEB = 6.0 Vdc Base-Emitter Saturation Voltage IC = 1.0 Adc; IB = 0.1 Adc IC = 3.5 Adc; IB = 0.7 Adc Collector-Emitter Saturation Voltage IC = 1.0 Adc; IB = 0.1 Adc IC = 3.5 Adc; IB = 0.7 Adc 2N3902 2N5157 ICEO ICEX 2N3902 2N5157 IEBO 250 250 500 200 200 µAdc µAdc µAdc
ON CHARACTERISTICS(3)
VBE(sat)
1.5 2.0 0.8 2.5
Vdc
VCE(sat)
Vdc
6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 794-1666 / Fax: (978) 689-0803
P 120101 age 1 of 2
2N3902, 2N5157 JAN SERIES
ELECTRICAL CHARACTERISTICS (con't) ON CHARACTERISTICS(3) (con't)
Forward-Current Transfer Ratio IC = 0.5 Adc; VCE = 5.0 Vdc IC = 1.0 Adc; VCE = 5.0 Vdc IC = 2.5 Adc; VCE = 5.0 Vdc IC = 3.5 Adc; VCE = 5.0 Vdc Collector-Emitter Sustaining Voltage IC = 100 mAdc Characteristics Symbol Min. Max. Unit
hFE
25 30 10 5
90
2N3902 2N5157
VCEO(sus)
325 400 2.5 25 250
Vdc
DYNAMIC CHARACTERISTICS
Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 0.2 Adc; VCE = 10 Vdc, f = 1 MHz Output Capacitance VCB = 10 Vdc; IE = 0, 100 kHz f 1.0 MHz
hfe
Cobo
pF
SWITCHING CHARACTERISTICS
Turn-On Time VCC = 125 Vdc; IC = 1.0 Adc; IB1= 0.1 Adc Turn-Off Time VCC = 125 Vdc; IC = 1.0 Adc; IB1 = 0.1 Adc; -IB2 = 0.50 Adc
t
on
0.8 1.7
µs µs
t
off
SAFE OPERATING AREA
DC Tests (continuous) TC = +250C; t 1.0 s (See Figure 3 of MIL-PRF-19500/371) Test 1 VCE = 28.6 Vdc, IC = 3.5 Adc Test 2 VCE = 70 Vdc, IC = 1.43 Adc Test 3 VCE = 325 Vdc, IC = 55 mAdc 2N3902 VCE = 400 Vdc, IC = 35 mAdc 2N5157 Switching Tests Load condition C (unclamped inductive load) TC = 250C; duty cycle 10%; RS = 0.1 (See Figure 4 of MIL-PRF-19500/371) Test 1 tP = approximately 3 ms (vary to obtain IC); RBB1 = 20 ; VBB1 = 10 Vdc; RBB2 = 3 k; VBB2 = 1.5 Vdc; VCC = 50 Vdc; IC = 3.5 Adc; L = 60 mH; R = 3 ; RL 14. Test 2 tP = approximately 3 ms (vary to obtain IC); RBB1 = 100 ; VBB1 = 10 Vdc; RBB2 = 3 k; VBB2 = 1.5 Vdc; IC = 0.6 Adc VCC = 50 Vdc; L = 200 mH; R = 8 ; RL 83. Switching Tests Load condition (clamped inductive load) TC = +250C; duty cycle 10%. (See Figure 5 of MIL-PRF-19500/371) Test 1 tP = approximately 30 ms (vary to obtain IC); RS = 0.1 ; RBB1 = 20 ; VBB1 = 10 Vdc; RBB2 = 100 ; VBB2 = 1.5 Vdc; VCC = 50 Vdc; IC = 3.5 Adc; L = 60 mH; R = 3 ; RL 0. (A suitable clamping circuit or diode can be used.) Clamp Voltage = 400 +0, -5 Vdc 2N3902 Clamp Voltage = 500 +0, -5 Vdc 2N5157 (Clamped voltage must be reached) 3.) Pulse Test: Pulse Width = 300µs, Duty Cycle 2.0%.
6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 794-1666 / Fax: (978) 689-0803
120101 Page 2 of 2
|
|
