|
Details, datasheet, quote on part number:UPGA350A
| |
| Part: | UPGA350A |
| Category: | Discrete => Diodes & Rectifiers => Rectifier Diodes |
| Description: | Silicon Controlled Rectifier, Package : Powermite_3 |
| Company: | Microsemi Corporation |
| Datasheet: | Download UPGA350A datasheet File size : 215 kB |
| Request For quote: | Find where to buy UPGA350A
|
| |
Datasheet text preview:
PRELIMINARY
UPGA350A
WATERTOWN DIVISION
Nanosecond SCR SWITCH
PROD UC T P RE V I EW
DESCRIPTION
KEY FEATURES
W W W . Microsemi .COM
Designed for high current narrow-pulse switching applications where size and current handling capability are critical. These devices may be triggered on using low power logic drivers from (+0.8 V at 200 µA).
Epoxy packaged, oxide passivated planar SCR chips with metallurgic bonds on both sides to achieve high reliability. Internal wire bond connection allows high current surge capability for narrow pulse applications.
IMPORTANT: For the most current data, consult MICROSEMI'swebsite:http://www.microsemi.com
ABSOLUTE MAXIMUM RATINGS AT 25º C (UNLESS OTHERWISE SPECIFIED)
Rating Repetative peak Off-State Voltage Peak On-State Current Peak Gate Current Reverse Gate Current Storage Temperature Range Operating Temperature Range Symbol VDRM ITSM IG M V GR Ts TJ Value 60 100 250 5 -50 to 150 -25 to 125 Unit V A mA V ºC ºC
Powermite 3 Package Small Mechanical Outline High speed switching capability Logic drive capability (0.8V, 200µA) UIS Rated Available with Lot Acceptance Testing Ideal for Laser Range finder and Camera Applications Ideal for Automotive Collision Avoidance Applications Available in 16mm Tape and Reel--6000 units/reel
APPLICATIONS/BENEFIT APPLICATIONS/BENEFITS Microsemi Corp DN14 design note Nanosecond SCR switch for reliable high current pulse generators, modulators and photo-flash quenching. Several new applications for nanosecond SCR switches include automotive collision avoidance systems, laser drivers, photo-flash quenching circuits, specially developed circuits for the emerging digital imaging range finders and communication markets.
THERMAL CHARACTERISTICS (UNLESS OTHERWISE SPECIFIED)
Thermal Resistance Junction-to Case (Anode) RJ 4.0 ºC/Watt
(1) Mounted on 2" square by 0.06' thick FR4 board with a 1" x 1" square 2 ounce copper pattern. (2) Mounted on 0.06 thick FR4 board, using recommended footprint.
Small foot print
UPGA350A UPGA350A
.100 X .160 inches 2 Foot print Area 16.51 mm 1:1 Actual size (anode contact)
Copyright 2001 Rev. 0.02, 2001-02-15
Microsemi
580 Pleasant Street, Watertown, MA. 02472-2408, 617-926-0404, Fax: 617-924-1235
Page 1
PRELIMINARY
UPGA350A
WATERTOWN DIVISION
Nanosecond SCR SWITCH
PROD UC T P RE V I EW
ELECTRICAL PARAMETERS@25°C (unless otherwise specified)
W W W . Microsemi .COM
Parameter
Forward Blocking Current On - State Voltage Gate Trigger Voltage Gate Trigger Current Reverse Gate Current Holding Current Reverse Current (note 1)
Switching characteristics (Tc = 25 °C)
Symbol
IDRM VT VGT IG T IGR IH IRRM Td tr tq tpg(on) dv/dt
Conditions
VDRM = 50V, RGK = 1k IT = 1A, Ig =10mA VD = 5V, RGS = 100 VD = 5V, RGS = 10k VGR = 5V VD = 5V, RGK = 1k VRRM = 30V, RGK = 1k Ig = 20 mA, IT = 1A VD = 50V, IT = 1A, Ig =10mA DC < 1% IT = IR = 1A, RGK = 1k Ig = 10mA, IT = 1A VD = 30V, RGK = 1k
Min.
Typ.
1.1 0.5 2 0.01 1.0 1 20 15 0.3 20
Max.
100 1.5 0.75 20 0.1 2.5 10 30 25 0.5 50
Units
nA V V µA mA mA mA ns ns µs ns V/µs
On characteristics (up to 100 A w/ 100 ns pulse @ Duty Cycle = 0.0001% or less)
0.3
Delay Time Rise Time Circuit Commutated Turn--off Time Gate Trigger--on Pulse Width Critical Rate of Rise Off State Voltage
15
30
Note 1: Pulse Test intended to guarantee reverse anode voltage capability for pulse commutation.
SPICE MODEL
.subckt SCR anode gate cathode PARAMS: * Powermite 3 UPGA350A high-speed thyristor +Vdrm= 60V Vrrm=30V Idrm=1µA Ih=5mA +dvdt=7E5V/s Igt=200µA Vgt=.75V Vtm=1.5V +Itm=2A ton=55ns toff=500ns .END
ELECTRICALS ELECTRICALS
PRODUCT PRELIMINARY DATA Information contained in this document is pre-production data, and is proprietary to Microsemi Corp. It may not be modified in any way without the express written consent of Microsemi Corp. Product referred to herein is not guaranteed to achieve preliminary or production status and product specifications, configurations, and availability may change at any time.
Copyright 2001 Rev. 0.02, 2001-02-15
Microsemi
580 Pleasant Street, Watertown, MA. 02472-2408, 617-926-0404, Fax: 617-924-1235
Page 2
PRELIMINARY
UPGA350A
WATERTOWN DIVISION
Nanosecond SCR SWITCH
PROD UC T P RE V I EW
W W W . Microsemi .COM
Case: Molded Epoxy Meets UL94VO at 1/8 inch Weght: 72 milligrams Lead and Mounting Temperature: 260°C max for 10 seconds NOTE: All dimensions are in inches.
PACKAGE DATA PACKAGE DATA
Copyright 2001 Rev. 0.02, 2001-02-15
Microsemi
580 Pleasant Street, Watertown, MA. 02472-2408, 617-926-0404, Fax: 617-924-1235
Page 3
|
|
