|Category||RF & Microwaves|
|Company||Mitsubishi Electronics America, Inc.|
|Datasheet||Download RA30H1317M datasheet
DESCRIPTION The 30-watt RF MOSFET Amplifier Module for 12.5-volt mobile radios that operate in the to 175-MHz range. The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (VGG=0V), only a small leakage current flows into the drain and the RF input signal attenuates to 60 dB. The output power and drain current increase as the gate voltage increases. With a gate voltage around 3.5V (minimum), output power and drain current increases substantially. The nominal output power becomes available at 4V (typical) and 5V (maximum). At VGG=5V, the typical gate current is 1 mA. This module is designed for non-linear FM modulation, but may also be used for linear modulation by setting the drain quiescent current with the gate voltage and controlling the output power with the input power. FEATURES Enhancement-Mode MOSFET Transistors VGG=5V, Pin=50mW Broadband Frequency Range: 135-175MHz Low-Power Control Current IGG=1mA (typ) at VGG=5V Module Size: x 9.88 mm Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output power with the input power
RF Input (Pin) Gate Voltage (VGG), Power Control Drain Voltage (VDD), Battery RF Output (Pout) RF Ground (Case)
SYMBOL PARAMETER VDD VGG Pin Pout Tcase(OP) Tstg Drain Voltage Gate Voltage Input Power Output Power Operation Case Temperature Range Storage Temperature Range CONDITIONS f=135-175MHz, ZG=ZL=50 RATING to +110 UNIT W °CELECTRICAL CHARACTERISTICS (Tcase=+25°C, ZG=ZL=50, unless otherwise specified) SYMBOL PARAMETER
f Pout 2fo in IGG Frequency Range Output Power Total Efficiency 2
Input VSWR Gate Current Stability Load VSWR Tolerance
Pin=25-70mW, Pout<40W (VGG control), Load Pin=50mW, Pout=30W (VGG control), Load VSWR=20:1
All parameters, conditions, ratings, and limits are subject to change without notice.
OUTPUT POWER, TOTAL EFFICIENCY, and INPUT VSWR versus FREQUENCY
OUTPUT POWER, POWER GAIN and DRAIN CURRENT versus INPUT POWER
60 OUTPUT POWER Pout(dBm) POWER GAIN Gp(dB) 50
60 OUTPUT POWER Pout(dBm) POWER GAIN Gp(dB) DRAIN CURRENT IDD(A) 40 30
OUTPUT POWER and DRAIN CURRENT versus DRAIN VOLTAGE
|Related products with the same datasheet|
|Some Part number from the same manufacture Mitsubishi Electronics America, Inc.|
M35061-002SP : Screen Character And Pattern Display Controllers
M38045FC-XXXFP : RAM Size: 768bytes Single Chip 8-bit CMOS Microcomputer
M38203E3-XXXFS : RAM Size: 512 Bytes; Single-chip 8-bit CMOS Microcomputer
M38206M3-XXXGP : RAM Size: 896 Bytes; Single-chip 8-bit CMOS Microcomputer
M38226M7MXXXFS : RAM Size: 896 Bytes; Single-chip 8-bit CMOS Microcomputer
M38255E1DFS : RAM Size: 768 Bytes; Single-chip 8-bit CMOS Microcomputer
M38C80ED-XXXFP : Single-chip 8-bit CMOS Microcomputer
M62320FP : 8-bit I/o Expander For I2C Bus
FDS402SN : 3 PHASE, 215 A, SILICON, RECTIFIER DIODE Specifications: Diode Type: RECTIFIER DIODE ; Diode Applications: Rectifier, Power Diodes ; IF: 215000 mA
AS004L2-11 : GAAS ic SPDT Low Loss Switch Reflect. s Low DC Power Consumption s Low Loss, Reflective, Short s 8 Lead Hermetic Surface Mount Package s Capable of Meeting MIL-STD Requirements6 The AS004L2-11 SPDT low loss reflective switch operates from DC4 GHz. The chip has a single series FET in each arm for low loss performance. This switch should be used when requirements call for low insertion loss.
BX7203 : Frequency (MHz) = 5 - 250 ;; Gain (Typ/Min) (dB) = 32 / 30 ;; Noise Figure (Typ/Max) (dB) = 3 / 4 ;; P1dB Comp Point (Typ/Min) (dBm) = +8 / +6.5 ;; 3rd Order Intercept (Typ) (dBm) = +18 ;; 2nd Order Intercept (Typ) (dBm) = +30 ;; DC Power (Typ) (V/mA) = +15 / +35 ;; Package = Package = Package = 4 Pin TO-8 Package = Surface Mount Package = Flatpack.
LP802 : Power. Pout W = 30 ;; Freq MHZ = 1000 ;; Gain DB = 12 ;; Theta JC = 1.8 ;; GM Mho = 1.6 ;; Idsat a = 11 ;; Ciss PF = 60 ;; CRSS PF = 2 ;; Coss PF = 30 ;; Die = 2 ;; Style = Single Ended ;; PKG = ap ;; = P ;; = a ;; = S.
MSC81400M : Avionics Transistors. Avionics Applications RF & Microwave Transistors.
NBB-300 : MMIC Amplifiers. Cascadable Broadband GAAS Mmic Amplifier DC to 12 GHZ.
RF2475 : Dual-band Low Noise Amplifier/mixer With Frequency Doubler. DUAL-BAND LOW NOISE AMPLIFIER/MIXER WITH FREQUENCY DOUBLER Typical Applications The RF2475 includes two downconverting mixers and associated LNAs. It is designed for IS136 handset applications in the cellular 800MHz and PCS 1900MHz bands. Each LNA has a gain bypass mode, which is controlled by the gain select pin. The device internally ties the two mixer.
RMPA2451-58 : MMIC. Circuit = 2.4-2.5 GHZ GAAS Mmic Power Amplifier ;; Frequency = 2.4-2.5 GHZ.
TAD6006 : Digital Attenuators. Frequency Range (MHz) Min = 50 ;; Frequency Range (MHz) Max = 500 ;; Number of Sections = 4 ;; Range (dB) = 2.0 ;; Range (dB) = 30.0 ;; Insertion Loss (dB) TYP = 2.2 ;; Insertion Loss (dB) Max = 3.0 ;; Switching Speed TYP / Max = 20 / 30 NS ;; Control = TTL ;; Power Typical (Vdc) = +5/-5 ;; Power Typical (mA) = 3/3.
TL9010 : Frequency Range (MHz) = 50 - 1000 ;; Insertion Loss Pin=20 Dbm, V=15V Typ/max (dB) = 2 / 3 ;; P1 DB Comp V=15V Typ/max (dBm) = -2 / 1 ;; Max Output Level Pin=20 Dbm, V=15V Typ/max (dBm) = -1 / 3 ;; VSWR In/out Max = 2:1 ;; Max Input Level (dBm) = +26 ;; Power Typical = +15 V / 7 ma.
TS3V330 : Quad SPDT Wide Bandwidth Video Switch With Low On-state Resistancethe ti TS3V330 Video Switch is a 4-bit 1-of-2 Multiplexer/demultiplexer With a Single Switch-enable (EN) Input. When en is Low, The Switch is Enabled And The D Port is Connected to The S Port. When en is High, The Switch is Disabled And The High-impedance State Exists Between The D And S Ports.
CXG1178K : Power Amplifier Module for JCDMA The CXG1178K is the power amplifier module which operates at a single power supply. This IC is designed using the Sony's original p-Gate HFET process. • Single power supply operation: VDD1 = VDD2 = 3.5V (High mode), 1.5V (Mid mode), 1.0V (Low mode), VGG = 2.8V • Ultrasmall package: 0.027cc (4.5mm × 4.5mm × 1.35mm) • High.
HMC687LP4 : HMC687LP4 / HMC687LP4E BiCMOS MMIC Mixer W/Integrated LO Amplifier, 1.7 - 2.2 GHz The HMC687LP4(E) is a high dynamic range passive MMIC mixer with integrated LO amplifier in a 4x4 SMT QFN package covering 1.7 to 2.2 GHz. Excellent input IP3 performance of +35 dBm for down conversion is provided for 3G & 4G GSM/CDMA applications at an LO drive of 0 dBm.
DB-55015-490 : RF Power RF power amplifier using 1 x PD55015-E N-channel enhancement-mode lateral MOSFETs.
BLF888A : UHF Power LDMOS Transistor A 600 W LDMOS RF power transistor for broadcast transmitter applications and industrial applications. The excellent ruggedness of this device makes it ideal for digital and analog transmitter applications..