Details, datasheet, quote on part number: 5962-9076601MEA
Part5962-9076601MEA
CategoryInterface and Interconnect => RS-485
DescriptionDS96F175M - RS-485/RS-422 Quad Differential Receiver, Package: Lcc, Pin Nb=20
CompanyNational Semiconductor Corporation
DatasheetDownload 5962-9076601MEA datasheet
Quote
Find where to buy
 
  

 

Features, Applications

The DS96F173 and the DS96F175 are high speed quad differential line receivers designed to meet the EIA-485 standard. The DS96F173 and the DS96F175 offer improved performance due to the use of L-FAST bipolar technology. The use of LFAST technology allows the DS96F173 and DS96F175 to operate at higher speeds while minimizing power consumption. The DS96F173 and the DS96F175 have TRI-STATE outputs and are optimized for balanced multipoint data bus transmission at rates to 15 Mbps. The receivers feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity 200 mV over a common mode input voltage range to +12V. The receivers are therefore suitable for multipoint applications in noisy environments. The DS96F173 features an active high and active low Enable, common to all four receivers. The DS96F175 features separate active high Enables for each receiver pair.

Features

Meets EIA-422A, EIA-423A standards Designed for multipoint bus applications TRI-STATE outputs Common mode input voltage range: to +12V Operates from single +5.0V supply Reduced power consumption (ICC 50 mA max) Input sensitivity 200 mV over common mode range Input hysteresis 50 mV typical High input impedance Military temperature range available Qualified for MIL STD 883C Available to standard military drawings (SMD) Available in DIP(J), LCC(E), and FlatPak (W) packages DS96F173 and DS96F175 are lead and function compatible with SN75173/175 or the AM26LS32/MC3486

H = High Level L = Low Level Z = High Impedance (off) X = Don't Care
TRI-STATE is a registered trademark of National Semiconductor Corporation.

Specifications for the 883 version of this product are listed separately. Storage Temperature Range (TSTG) to +175C Lead Temperature (Soldering, 60 sec.) 300C Max. Package Power Dissipation (Note at 25C Ceramic DIP (J) 1500 mW Supply Voltage 25V Input Voltage, or B Inputs 25V Differential Input Voltage Enable Input Voltage 7.0V Low Level Output Current 50 mA

Min Supply Voltage (VCC) DS96F175C Common Mode Input Voltage (VCM) Differential Input Voltage (VID) Output Current HIGH (IOH) Output Current LOW (IOL) Operating Temperature (TA) 4.75 -7 Typ 5.0 Max Units mA C

Electrical Characteristics (Notes 3, 4) Over recommended supply voltage and operating temperature ranges, unless otherwise specified

Symbol VTH VTL VTH - VTL VIH VIL VIC VOH VOL IOZ II IIH IIL RI IOS ICC ICCX Parameter Differential-Input High Threshold Voltage Differential-Input (Note 5) Low Threshold Voltage Hysteresis (Note 6) Enable Input Voltage HIGH Enable Input Voltage LOW Enable Input Clamp Voltage Output Voltage HIGH Output Voltage LOW High-Impedance State Output Line Input Current (Note 7) Enable Input Current HIGH Enable Input Current LOW Input Resistance Short Circuit Output Current Supply Current (Note 8) No Load Outputs Enabled Outputs Disabled -18 mA VID 200 mV IOH -400 A VID to 2.4V Other Input = 0V VIH = 2.7V VIL to +125C IOL 8.0 mA IOL 11 mA VCM VO = VOL VO = VOH Conditions Min Typ Max 0.2 Units V

VCC = 25C Symbol tPLH tPHL tZH tZL tHZ Parameter Propagation Delay Time, Low to High Level Output Propagation Delay Time, High to Low Level Output Enable Time to High Level Output Enable Time to Low Level Output Disable Time from High Level = 15 pF, Figure = 15 pF, Figure = 5.0 pF, Figure ns Conditions VID = 15 pF, Figure 1 VCM 22 ns Min 5.0 Typ 15 Max 22 Units ns

Output Disable Time from Low Level Pulse Width Distortion (SKEW)

Note 2: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The tables of "Electrical Characteristics" provide conditions for actual device operation. Note 3: Unless otherwise specified min/max limits apply across the to +70C range for the DS96F175C. All typicals are given for VCC = 5V and = 25C. Note 4: All currents into the device pins are positive; all currents out of the device pins are negative. All voltages are reference to ground unless otherwise specified. Note 5: The algebraic convention, when the less positive (more negative) limit is designated minimum, is used in this data sheet for common mode input voltage and threshold voltage levels only. Note 6: Hysteresis is the difference between the positive-going input threshold voltage. VTH, and the negative going input threshold voltage, VTL. Note 7: Refer to EIA-485 Standard for exact conditions. Note 8: Only one output at a time should be shorted.


 

Related products with the same datasheet
5962-9076601MFA
5962-9076602M2A
5962-9076602MEA
5962-9076602MFA
DS96F173M
DS96F173MJ
DS96F173MJ/883
DS96F175C
DS96F175CJ
DS96F175M
DS96F175MJ
Some Part number from the same manufacture National Semiconductor Corporation
5962-9076601MFA DS96F175M - RS-485/RS-422 Quad Differential Receiver, Package: Lcc, Pin Nb=20
5962-9080001MEA DM54LS502 - 8-Bit Successive Approximation Register, Package: Cerdip, Pin Nb=16
5962-9081201MGA LM6121 - High Speed Buffer Life-time Buy , Package: TO-5, Pin Nb=8
5962-9088301QEA 1a Low Dropout Regulator
5962-9088401QEA LM2940 - 1A Low Dropout Regulator, Package: SOT-223, Pin Nb=4
5962-9091001M2A 54F377 - Octal D Flip-flop With Clock Enable, Package: Lcc, Pin Nb=20
5962-9091401MXA LM185-ADJ - Adjustable Micropower Voltage Reference, Package: TO-46, Pin Nb=3
5962-9091601BSA 54AC520 - 8-Bit Identity Comparator, Package: Lcc, Pin Nb=20
5962-9098501B2A 54AC521 - 8-Bit Identity Comparator, Package: Lcc, Pin Nb=20
5962-9099301MPA CLC505 - High Speed, Programmable Supply Current, Monolithic op Amp, Package: Cerdip, Pin Nb=8
5962-9099401MPA CLC404 - Wideband, High Slew Rate, Monolithic op Amp, Package: Cerdip, Pin Nb=8
5962-9152801MXA 100301 - Low Power Triple 5-Input Or/nOR GATE, Package: Cerquad, Pin Nb=24
5962-9152801VXA Low Power Triple 5-Input Or/nOR GATE
5962-9152801VYA 100301 - Low Power Triple 5-Input Or/nOR GATE, Package: Cerquad, Pin Nb=24
5962-9152802MXA 100302 - Low Power Quint 2-Input Or/nOR GATE, Package: Cerquad, Pin Nb=24
5962-9153001MXA 100324 - Low Power Hex Ttl-to-ecl Translator, Package: Cerquad, Pin Nb=24
5962-9153101MXA 100325 - Low Power Hex Ecl-to-ttl Translator, Package: Cerquad, Pin Nb=24
5962-9153601MXA 100331 - Low Power Triple D Flip-Flop, Package: Cerquad, Pin Nb=24
5962-9153701MXA 100304 - Low Power Quint And/nand Gate, Package: Cerquad, Pin Nb=24
5962-9160301M2A 54AC169 - 4-Stage Synchronous Bidirectional Counter, Package: Lcc, Pin Nb=20
5962-9160401MEA 54AC258 - Quad 2-Input Multiplexer With Tri-state Outputs, Package: Cerdip, Pin Nb=16

DS96F174C : DS96F172M - EIA-485/EIA-422 Quad Differential Drivers, Package: Lcc, Pin Nb=20

JM38510/33701BEA : Military/Aerospace->FAST 54F138 - 1-of-8 Decoder/Demultiplexer, Package: Lcc, Pin Nb=20

LMH6702MAX : CLC449 - 1.1GHz Ultra Wideband Monolithic op Amp, Package: Cerdip, Pin Nb=8

LMV431CZ : LMV431 - Low-voltage (1.24V) Adjustable Precision Shunt Regulators, Package: SOT-23, Pin Nb=5

LM3203 : 500mA Miniature, Adjustable, Step-Down DC-DC Converter with Bypass Mode The LM3203 is a DC-DC converter optimized for powering RF power amplifiers (PAs) from a single Lithium-Ion cell. However, they may be used in many other applications. It steps down an input voltage of 2.7V to 5.5V to an adjusta

ADC16V130CISQ : 16-Bit, 130 MSPS A/D Converter With LVDS Outputs he ADC16V130 is a monolithic high performance CMOS analog-to-digital converter capable of converting analog input signals into 16-bit digital words at rates up to 130 Mega Samples Per Second (MSPS). This converter uses a differential, pipelined archi

CR16MCS9VJI18 : Family of 16-bit Can-enabled Compactrisc Microcontrollers

PAL20R4VM : Programmable Array Logic 24-pin Medium PAL Series -7,-5,and -4

PAL20C6AVC : Progammable Array Logic Series 24 (PAL Series 24)

 
0-C     D-L     M-R     S-Z