Details, datasheet, quote on part number: DS96172
CategoryCommunication => Transeivers
DescriptionRs-485/rs-422 Quad Differential Line Drivers
CompanyNational Semiconductor Corporation
DatasheetDownload DS96172 datasheet
Find where to buy


Features, Applications

The DS96172 and DS96174 are high speed quad differential line drivers designed to meet EIA Standard RS-485. The devices have TRI-STATE ® outputs and are optimized for balanced multipoint data bus transmission at rates to 10 Mbps. The drivers have wide positive and negative common mode range for multipoint applications in noisy environments. Positive and negative current-limiting is provided which protects the drivers from line fault conditions over to -7.0V common mode range. A thermal shutdown feature is also provided and occurs at junction temperature of approximately 160°C. The DS96172 features an active high and active low Enable, common to all four drivers. The DS96174 features separate active high Enables for each driver pair. Compatible RS-485 receivers, transceivers, and repeaters are also offered to provide optimum bus performance. The respective device types are DS96175, DS96176 AND DS96177.


Meets EIA Standard RS-485 and RS-422A Monotonic differential output switching Transmission rate to 10 Mbs TRI-STATE outputs Designed for multipoint bus transmission Common mode output voltage range: to +12V Operates from single +5V supply Thermal shutdown protection DS96172/DS96174 are lead and function compatible with the SN75172/75174 or the AM26LS31/MC3487 respectively

TRI-STATE is a registered trademark of National Semiconductor Corporation.

If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Storage Temperature Range Molded DIP Operating Temperature Range Lead Temperature Molded DIP (soldering, 10 sec.) Supply Voltage Enable Input Voltage Maximum Power Dissipation (Note to +70°C

Supply Voltage (VCC) Common Mode Output Voltage (VOC) Output Current HIGH (IOH) Output Current LOW (IOL) Operating Temperature (TA) Min 4.75 -7 Typ 5 Max Units mA °C

Electrical Characteristics (Notes 3, 4) over recommended temperature and supply voltage ranges, unless otherwise specified

Symbol VIH VIL VOH VOL VIC |VOD1| |VOD2| |VOD| VOC |VOC| IO IOZ IIH IIL IOS Parameter Input Voltage HIGH Input Voltage LOW Output Voltage HIGH Output Voltage LOW Input Clamp Voltage Differential Output Voltage Differential Output Voltage Change in Magnitude of Differential Output Voltage (Note 5) Common Mode Output Voltage (Note 6) Change in Magnitude of Common Mode Output Voltage (Note 5) Output Current with Power Off High Impedance State Output Current Input Current HIGH Input Current LOW Short Circuit Output Current (Note 7) VCC VO = VCC = 12V ICC Supply Current (All Drivers) No Load Outputs Enabled Output Disabled = 54, Figure µA mA IOH -20 mA IOL = 54, Figure = 100, Figure or 100, Figure Conditions Min 2 0.8 Typ Max Units

Parameter Differential Output Delay Time Differential Output Transition Time Propagation Delay Time, Low-to-High Level Output Propagation Delay Time, High-to-Low Level Output Enable Time to High Level Output Enable Time to Low Level

Output Disable Time from High Level Output Disable Time from Low Level

Note 2: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The tables of "Electrical Characteristics" provide conditions for actual device operation. Note 3: Unless otherwise specified min/max limits apply across the to +70°C range for the DS96172/DS96174. All typicals are given for VCC = 5V and = 25°C. Note 4: All currents into the device pins are positive; all currents out of the device pins are negative. All voltages are referenced to ground unless otherwise specified. Note 5: |VOD| and |VOC| are the changes in magnitude of VOD and VOC respectively, that occur when the input is changed from a high level to a low level. Note 6: In EIA Standards RS-422A and RS-485, VOC, which is the average of the two output voltages with respect to ground, is called output offset voltage, VOS. Note 7: Only one output at a time should be shorted.

FIGURE 1. Differential and Common Mode Output Voltage
FIGURE 2. Differential Output Delay and Transition Times


Some Part number from the same manufacture National Semiconductor Corporation
DS96172CN RS-485/RS-422 Quad Differential Line Drivers
DS96173 DS96173 - RS-485/RS-422 Quad Differential Line Receivers, Package: Mdip, Pin Nb=16
DS96174 DS96174 - RS-485/RS-422 Quad Differential Line Drivers, Package: Mdip, Pin Nb=16
DS96175 DS96173 - RS-485/RS-422 Quad Differential Line Receivers, Package: Mdip, Pin Nb=16
DS96176 DS96176 - RS-485/RS-422 Differential Bus Transceiver, Package: Mdip, Pin Nb=8
DS96177 Rs-485/rs-422 Differential Bus Repeater
DS96177CN RS-485/RS-422 Differential Bus Repeater
DS9622 DS9622 - Dual Line Receiver, Package: Lcc, Pin Nb=20
DS9622ME/883 Dual Line Receiver
DS9622MJ/883 DS9622 - Dual Line Receiver, Package: Lcc, Pin Nb=20
DS9627 DS9627 - Dual Line Receiver, Package: Cerdip, Pin Nb=16
DS9627MJ/883 Dual Line Receiver
DS9636A DS9636A - RS-423 Dual Programmable Slew Rate Line Driver, Package: Cerdip, Pin Nb=8
DS9637A DS9637A - Dual Differential Line Receiver, Package: Soic Narrow, Pin Nb=8
DS9637ACMX DS9637A - Dual Differential Line Receiver, Package: Soic Narrow, Pin Nb=8
DS9638 DS9638 - RS-422 Dual High Speed Differential Line Driver, Package: Soic Narrow, Pin Nb=8
DS9638MJ/883 Rs-422 Dual High Speed Differential Line Driver
DS9639A Dual Differential Line Receiver
DS96F172C Eia-485/eia-422 Quad Differential Drivers

54ACQ240 : Military/Aerospace->FACT ACQ 54ACQ240 - Quiet Series Inverting Octal Buffer/line Driver With Tri-state Outputs, Package: Lcc, Pin Nb=20

LM185-12 : Micropower Voltage Reference Diode

LM2677LDX-3.3 : LM2677 - Simple Switcher High Efficiency 5A Step-down Voltage Regulator With Sync, Package: Llp, Pin Nb=14

PAL12X6A : Progammable Array Logic Series 24 (PAL Series 24)

LM4668MH : 10W High-efficiency Mono BTL Audio Power Amplifier

COP8SGE840N6 : 8-bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and Usart

PAL18R2VC : Progammable Array Logic Series 24 (PAL Series 24)

LM317L_06 : 3-terminal Adjustable Regulator

COP8SGK640D6 : 8-bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and Usart

COP8SGR940L6 : 8-bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and Usart

LP2985A-50DBVRG4 : Micropower 150 mA Low-noise Low-dropout Regulator in Sot-23 and Micro SMD Packages for Applications

Same catergory

31244 : Broadband & Access. Networking & Communications - Storage Products - Disk Controllers - Intel 31244 Pci-x to Serial Ata Controller.

BGO747 : BGO747; BGO747/FC0; BGO747/SC0; 750 MHZ Optical Receivers. Excellent linearity Extremely low noise to 750 MHz Excellent flatness (straight line) Standard CATV outline Rugged construction Gold metallization ensures excellent reliability High optical input power range. APPLICATIONS CATV optical node systems operating in the to 750 MHz frequency range. High dynamic range optical receiver amplifier modules in a standard.

CMX641A : Dual SPM/SecurityDetector/Generator . Two (12kHz/16kHz) SPM Detectors Selectable 12kHz/16kHz ASK Generator Selectable Tone Follower or Packet Mode 3-State Outputs Excellent Speech-Band Rejection Hardwired Control for Non-µC Systems Selectable Bandwidth Limits and Stable Centre Frequency from a Standard Xtal Applications SPM for Pair-Gain Systems Payphone Security Applications Call Charge.

HFBR-1602 : 2 MBD Sercos Fiber Optic Transmitter. SERCOS Fiber Optic Transmitters and Receiver Technical Data Fully Compliant to SERCOS Optical s Optimized for 1 mm Plastic Optical Fiber Compatible with SMA Connectors Auto-Insertable and Wave Solderable Data Transmission at Symbol Rates from DC to over 2 MBd for Distances from 0 to over 20 Metres Applications Industrial Control Data Links Reduction.

IDT82V2108 : 8 Channel T1/J1/E1 Framer. Octal Framer supporting T1, E1 and J1 Formats Provides programmable system interface to support Mitel® STbus, AT&T ® CHI and MVIP bus, supporting data rates up to four links can be byte interleaved on one system bus without external logic Provides up to three internal floating HDLC controllers for each framer to support ISDN PRI and V5.X interface.

KFO-TX08CA : Fiber Optic Transmitting Module. Low Jitter Output Operating Voltage ~ 5.25V TTL Interface Signal Transmission Speed 8Mbps A Self-tapping Hole for Easy Attachment to Audio Equipment Panels 3 pin Cap Houging Applications Power Supply Voltage Input Voltage Operating Temperature Storage Temperature Soldering Temperature *1 Parameter Operating Supply Voltage Peak Emission Wavelength Data.

LDO_512 : ip LIBRARY: Ultra Low Noise, High Psrr, Low Power, 30MA Very Low Dropout Voltage Regulators..

LDO_513 : ip LIBRARY: Power Supply Range 2.9V to 13V, Low Power, 50MA Low Dropout Voltage Regulators..

LXT3108 : Broadband & Access. Networking & Communications - Broadband & Access Products - te Carrier Access Components T1/E1 - Intel LXT3108 Line Interface Unit.

M67775 : RF Power Module For 1465-1477MHz, 13.5V, 7.5W FM Mobile Radio.

MC13017P : Ntsc/pal Chroma 10 Color TV And Timebase Processor. The MC13017 consists of all the necessary circuits for TV NTSC/PAL decoding and timebase processing. It forms a kit set with the MC44301 VIF and the TDA3190 Sound IF and Power for a low cost, high performance CTV system. On­Chip Sync Separator Dual Loop Horizontal Timebase Direct Locked Vertical Counter X­Ray Protection Noise Blanking on Sync Separator.

MOF-R3K5 : Fiber Optic Receiver. 1.Uni-directional data transmission using plastic fiber 2.Signal transmission speed :MAX. 6 Mbps (NRZ signal) 3.Operating voltage V 4.TTL compatible 5.Suitable for MOF-T3K5 Transmitter Recommended drilling as viewd from the soldering face Tolerance is ±0.3mm unless otherwise noted. @ TA=25oC Symbol Vcc IOH IOL Topr Tstg TSOL Rating +80 260* Unit V mA Parameter.

MSM6684B : 4M X 1-bit Serial Register. This version: MSM6684B Feb. 1999 Previous version: May. 1997 is a serial register organized as 4,194,304 words x one bit, characterized by mediumspeed, low power consumption operation. This device has a built-in internal address generation circuit allowing continuous serial read/write operation by external clock input. Read/write operation causes the internal.

MT3370BN : DTMF Receivers. = Wide Dynamic Range (50DdB) DTMF Receiver With Early DTMF Tone Detection, Power Down Mode And Local Oscillator ;; Package Type = Ssop ;; No. Of Pins = 20.

PCD3311C : PCD3311C; PCD3312C; Dtmf/modem/musical-tone Generators;; Package: SOT162-1 (SO16), SOT27-1 (DIP14).

SLE66CX80PE : Security & Chip Card Ics. 8/16-Bit Security Controller with enhanced instruction set for large memories 0.22 µm CMOS Technology 96-Kbytes ROM, 5052 Bytes RAM, 8-Kbytes EEPROM 1100-Bit Advanced Crypto Engine This document contains preliminary information on a new product under development. Details are subject to change without notice. Revision History: Page Current Version 02.04.

SN5426 : Quadruple 2-input High-voltage Interface Opsitive-nand Gates.

T5552 : RF Identification. Transponder Module With 1-Kbit Memory, Includes The IDIC(TM) E5552 Plus 425-pF Capacitor.

CMX7031 : The CMX7031 or CMX7041 configured via FI-2.0 provides a half-duplex 4-level FSK modem suitable for use in PMR/LMR radios. In conjunction with a suitable host µcontroller and radio modules, this provides the digital baseband processing to implement a radio function to satisfy the requirements of ETS 102 490 and EN 301 166 or EN 300 113. The CMX7041 is identical.

ISL1572 : Power Line Communication (PLC) The ISL1572 is a dual operational amplifier designed for PLC line driving in OFDM and SSC based solutions. This device a high drive capability of 750mA while consuming only 6mA of supply current per amplifier and operating from a single 4.5V to 12V supply. The driver achieves a typical distortion of -80dBc, at 150kHz into.

0-C     D-L     M-R     S-Z