Details, datasheet, quote on part number: DSV14196
PartDSV14196
CategoryInterface and Interconnect => RS-232 (EIA-232) => RS-232 Serial Port
TitleRS-232 Serial Port
DescriptionDSV14196 - +3.3V Supply EIA/TIA-232 5 Driver X 3 Receiver, Package: Soic Wide, Pin Nb=20
CompanyNational Semiconductor Corporation
DatasheetDownload DSV14196 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

The is a five driver, three receiver device which conforms to the EIA/TIA-232-E and the ITU-T V.28 standards. The flow-through pinout facilitates simple non-crossover board layout. The DSV14196/DSV14196T provides a peripheral side one-chip solution for the common 9-pin serial RS-232 interface between data terminals and data communications equipment.

Features

Conforms to EIA/TIA-232-E and ITU-T V.28 5 drivers and 3 receivers Flow-through pinout Failsafe receiver outputs high when inputs open 20-pin wide SOIC package LapLink ® compatible 230.4 kbps data rate +3.3V Logic Interface Commercial temperature range option 70°C) n Industrial temperature range option to +85°C)

If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) +7V +15V Supply Voltage (V+) -15V Supply Voltage (V-) Driver Input Voltage 0V to VCC ± 15V Driver Output Voltage (Power Off) ± 25V Receiver Input Voltage 0V to VCC Receiver Output Voltage (ROUT) Maximum Power Package Dissipation +25°C M Package 1524 mW Derate M Package 12.2 mW/°C above 25°C Storage Temperature Range to +150°C

Lead Temperature Range (Soldering, 4 sec.) ESD Ratings (HBM. k, 100 pF)

Supply Voltage (VCC) Supply Voltage (V+) Supply Voltage (V-) Operating Free Air Temperature (TA) DSV14196 DSV14196T Min +9.0 -13.2 Nom +12.0 -12.0 Max +13.2 -9.0 Units V

Over recommended operating supply and temperature ranges unless otherwise specified Symbol ICC I+ I- Parameter VCC Supply Current V+ Supply Current V- Supply Current Conditions No Load, All Inputs +3.3V No Load, All = -9V Driver Inputs or +2V. All = -9V Receiver Inputs 2.0 0.8 VIN = 3.3V VIN 3 k, VIN 3 k, VIN 7 k, VIN 3 k, VIN 3 k, VIN 7 k, VIN = -13.2V VOUT = 0V, VIN = 0.8V VOUT = 0V, VIN 2.0V -2V VOUT V- = VCC 0V -2V VOUT V- = VCC = Open Circuit Min Typ Max Units µA mA DEVICE CHARACTERISTICS

DRIVER CHARACTERISTICS VIH VIL IIH IIL VOH High Level Input Voltage Low Level Input Voltage High Level Input Current Low Level Input Current High Level Output Voltage

Output High Short Circuit Current (Note 4) Output Low Short Circuit Current (Note 4) Output Resistance

Over recommended operating supply and temperature ranges unless otherwise specified Symbol VTH Parameter Input High Threshold (Recognized as a High Signal) VTL Input Low Threshold (Recognized as a Low Signal) Input Resistance Input Current VOUT 1.3 V Conditions VOUT 3.2 mA Min 1.5 Typ 1.85 Max 2.4 Units V RECEIVER CHARACTERISTICS

VIN ± 15V VIN = +15V VIN = +3V VIN = -15V VIN = -3V IOH = -0.5 mA, VIN = -3V IOH = -10 µA, VIN = -3V IOH = -0.5 mA, VIN = Open Circuit IOH = -10 µA, VIN = Open Circuit IOL = 3.2 mA, VIN = +3V VOUT = 0V, VIN = 0V (Note 4)

Low Level Output Voltage Short Circuit Current
Over recommended operating supply and temperature ranges unless otherwise specified Symbol ICC I+
DEVICE CHARACTERISTICS No Load, All Driver Inputs or +2V. All Receiver Inputs or 2.4V.

DRIVER CHARACTERISTICS VIH VIL IIH IIL VOH High Level Input Voltage Low Level Input Voltage High Level Input Current Low Level Input Current High Level Output Voltage VIN = 3.3V VIN 3 k, VIN 3 k, VIN 7 k, VIN 3 k, VIN 3 k, VIN 7 k, VIN = -13.2V VOUT = 0V, VIN = 0.8V VOUT = 0V, VIN 2.0V -2V VOUT V- = VCC 0V -2V VOUT V- = VCC = Open Circuit µA mA


 

Related products with the same datasheet
DSV14196TWM
DSV14196TWMX
DSV14196WM
DSV14196WMX
Some Part number from the same manufacture National Semiconductor Corporation
DSV14196TWM DSV14196 - +3.3V Supply EIA/TIA-232 5 Driver X 3 Receiver, Package: Soic Wide, Pin Nb=20
E503PCASM Clc503 Evaluation Board
E935PCASM Clc935 Evaluation Boards
E949PCASM Clc949 Evaluation Board
EL2074 CLC420 - High Speed, Voltage Feedback op Amp, Package: Lcc, Pin Nb=20
EL2232 CLC431 - Dual Wideband Monolithic op Amp With Disable, Package: Lcc, Pin Nb=20
F100145
F100322 Low Power 9-bit Buffer
F100328 Low Power Octal Ecl/ttl Bi-directional Translator With Latch
F100329 Low Power Octal Ecl/ttl Bidirectional Translator With Register
F100331 Low Power Triple D Flip-flop
F100364 Low Power 16-input Multiplexer
F100371 Low Power Triple 4-input Multiplexer With Enable
F100402
F100422
F1212
F3054
F30S54
F30S64
F30S67
FDH600
Same catergory

485RPTR : Rs-485 Repeater. Model 485RPTR Introduction The 485RPTR can extend RS-485 data lines an additional 4000 feet. The 485RPTR can expand an existing RS-485 system greater than the 32 node limitation defined by the RS-485 Standard. A typical setup using the an RS-485 repeater is shown in Figure 3. The unit has surge suppression on both sides to dampen any transient voltage.

5962-9689301QXA : ti SN55976A, 9-Channel Differential Transceiver. Improved Speed and Package Replacement for the SN75LBC976 Designed to Operate to 20 Million Data Transfers per Second (Fast-20 SCSI) Nine Differential Channels for the Data and Control Paths of the Small Computer Systems Interface (SCSI) and Intelligent Peripheral Interface (IPI) SN75976A Packaged in Shrink Small-Outline Package with 25-Mil Terminal.

CS4121 : Misc. Low Voltage Precision Air-core Tach/speedo Driver. The CS4121 is specifically designed for use with air­core meter movements. The IC provides all the functions necessary for an analog tachometer or speedometer. The CS4121 takes a speed sensor input and generates sine and cosine related output signals to differentially drive an air­core meter. Many enhancements have been added over industry standard.

FAN5230 : System Controllers. System Electronics Regulator For Mobile PCS. to 24V input voltage range Five regulated outputs: @ 5A (PWM) @ 5A (PWM) @ 50mA Always On (Linear) @ 50mA Always On (Linear) @ 120mA Boost (PWM) >96% efficiency Hysteretic mode for light loads PWM mode for normal loads Main regulators switch out of phase 300kHz fixed frequency switching RDS(ON) current sense over-current Reduced BOM; Max. efficiency.

GT-1X : Gt-1x Series Are Small Gifts That CAN be Used as Mini Torches. GT-1X Series are small gifts that can be used as mini torches. They can give out ultraviolet radiation and purple light. It can be used to recognise some kind of counterfeit money. GT-1R has a pink appearance. GT-1B has a blue appearance. GT-1W has a silvery white appearance. GT-1Y has a yellow appearance. Power Dissipation @ Ta=25°C Forward Current,.

HUBPORT/7 : Seven-port Usb Hub. Please contact Technical Support for more information. Model HUBPORT/7 Overview The is an active (powered) seven-port USB hub designed to provide a convenient and effective means of bringing Universal Serial Bus connectivity to your PC, server, or laptop. Unlike most other USB hubs, Hubport/7 individual power management for each port. In case of a short.

IR2125 : Single High Side Driver, Current Limiting, Programmable Shutdown Error Pin in a 8-pin Dip Package.

LB11999 : Three-phase Brushless Motor Driver For Cd-rom Spindle Drive (supports 44x, 48x, 50x).

M56694FP : Latched/Addressable. Bi-cmos & Dmos 32-bit Serial-input Latched Driver.

MAX9155 : Low-Jitter, Low-noise LVDS Repeater in an SC70 Package. The is a low-voltage differential signaling (LVDS) repeater, which accepts a single LVDS input and duplicates the signal at a single LVDS output. Its low-jitter, low-noise performance makes it ideal for buffering LVDS signals sent over long distances or noisy environments, such as cables and backplanes. The MAX9155's tiny size makes it especially suitable.

N74F2245D : Octal Transceiver With 30ohm Equivalent Output Termination 3-state. 74F2245 Octal transceiver with 30W equivalent output termination (3-State) Octal transceiver with 30W equivalent output termination (3-State) Octal bidirectional bus interface 30 Ohm output termination for driving DRAM Outputs are placed in high impedance state during power-off The is an octal transceiver featuring non-inverting 3-State bus compatible.

SN65LBC179A : Low-power Differential Line Driver And Receiver Pairs. SN65LBC179A, SN75LBC179A LOW-POWER DIFFERENTIAL LINE DRIVER AND RECEIVER PAIRS High-Speed Low-Power LinBiCMOS Circuitry Designed for Signaling Rates to 30 Mbps Bus-Pin ESD Protection Exceeds 12 kV HBM Very Low Disabled Supply-Current Requirements. 700 µA Max Common-Mode Voltage Range 12 V Low Supply Current. 15 mA Max Compatible With ANSI Standard TIA/EAI-485-A.

SN65LVDS389DBT : ti SN65LVDS389, Octal LVDS Transmitter. Four ('391), Eight ('389) or Sixteen ('387) Line Drivers Meet or Exceed the Requirements of ANSI EIA / TIA-644 Standard Designed for Signaling Rates to 630 Mbps With Very Low Radiation (EMI) Low-Voltage Differential Signaling With Typical Output Voltage 350 mV and a 100- Load Propagation Delay Times Less Than 2.9 ns Output Skew Is Less Than 150 ps Part-to-Part.

SN74FB2033HRC : 8-bit Ttl/btl Registered Transceiver. Compatible With IEEE 1194.1-1991 (BTL) Standard TTL A Port, Backplane Transceiver Logic (BTL) B Port Open-Collector B-Port Outputs Sink 100 mA BIAS VCC Pin Minimizes Signal Distortion During Live Insertion/Withdrawal B-Port Biasing Network Preconditions the Connector and PC Trace to the BTL High-Level Voltage TTL-Input Structures Incorporate Active.

SN75LBC970ADL : ti SN75LBC970A, Differential Converter-control. Provides Differential SCSI from SingleEnded Controller When Used With the SN75LBC971A Data Transceiver Designed to Operate at Fast-SCSI Speeds of 10 Million Data Transfers per Second Nine Transceivers Meet or Exceed the Requirements of ANSI Standard EIA-485 and ISO-8482 Standards Packaged in Shrink Small-Outline Package with 25 mil Terminal Pitch Low Disabled.

TJA1050 : TJA1050; High Speed CAN Transceiver;; Package: SOT96 (SO8), SOT96-1 (SO8).

TMS279X : Floppy Disk Formattericontroller Family. On-Chip PILL Data Separator On-Chip Write Precompensation Logic Single + 5-V Supply Accommodates Single-and Double-Density Formats - MM3740 (FM) - IBM34 (MFM) Automatic Seek with Verify Multiple Sector Read/Write TTL Compatible Programmable Control - Selectable Track-to-Track Access - Head Load Timing Software Compatible with the FD179X Series Soft.

PEX 8508 : The ExpressLane™ PEX 8508 8-lane, 5-port switch product offers PCI Express switching capability conforming to the PCI Express r1.1. This device enables users to add low cost, scalable high bandwidth switching, both fan-in/out and peer-to-peer, to a wide variety of applications including office automation, network interface adapters, docking stations,.

MCP2021 : LIN Transceiver With Voltage Regulator The MCP2021 provides a bidirectional, half-duplex communication physical interface to an automotive and industrial Local Interconnect (LIN) and SAE J2602 bus. Operation covers LIN Bus Versions 1.3, 2.0, 2.1 and SAE J2602. The device incorporates a voltage regulator with 5V/50mA or 3.3V/50mA output. The regulator.

UJA1078A : High-speed CAN/dual LIN Core System Basis Chip The UJA1078A core System Basis Chip (SBC) replaces the basic discrete components commonly found in Electronic Control Units (ECU) with a high-speed Controller Area Network (CAN) and two Local Interconnect Network (LIN) interfaces. The UJA1078A supports the networking applications used to control power and sensor.

 
0-C     D-L     M-R     S-Z