Details, datasheet, quote on part number: FPD63310
PartFPD63310
CategoryInterface and Interconnect
DescriptionUniversal Interface Xga Panel Timing Controller (ui-xpat) Reduced Swing Differential Sginaling (rsds) (obsolete)
CompanyNational Semiconductor Corporation
DatasheetDownload FPD63310 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

FPD63310 Universal Interface XGA Panel Timing Controller (UI-XPAT) Reduced Swing Differential Signaling (RSDS )

The FPD63310 is the first TFT-LCD timing controller that combines at TTL single pixel system interface with National's Reduced Swing Differential Signaling (RSDS) source driver interface. It resides on the TFT-LCD panel and provides the data buffering and control signal generation for XGA and SVGA TFT-LCD panels. The RSDS path to the source or column drivers contributes toward lowing radiated EMI, reducing system power consumption and eliminates one of the pixel busses used in typical XGA TFT-LCD panels today. This single 9-bit differential bus conveys the 18-bit color data for XGA panels at 130Mb/s when using VESA 60Hz standard timing. With the addition of a single National or 564 FPD-LINK TM chip, the entire data path is optimized for reduced EMI, power consumption and width..

Feature
s Reduced Swing Differential Signaling (RSDS)TM source
s Universal TTL single pixel system interface s Drives National Semiconductor RSDS Column Drivers
s Optional EEPROM programming allows fine tuning in
s Ability to drive SVGA XGA TFT-LCD Systems s Narrow 9-bit differential Source Driver bus minimizes
Gray Scale Voltage Reference BUS Line Transfer Signal /9 + CLK, RSDS BUS
ThinPlastic Quad Flatpac (JEDEC)(TQFP) NS package Number VJD100A

LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user.

National Semiconductor Corporation Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com National Semiconductor Europe

2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.

National Semiconductor Asia Pacific Customer Response Group Tel: 65-254-4466 Fax: 65-250-4466 Email: sea.support@nsc.com

National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.


 

Some Part number from the same manufacture National Semiconductor Corporation
FPD85308 FPD85308 - Panel Timing Controller, Package: Evaluation Board, Pin Nb=-
FPD85310
FPD87310 Universal Interface Xga Panel Timing Controller With RSDS (reduced Swing Differential Signaling) And Fpd-link
FPD87346 Low Emi, Low Dynamic Power (SVGA) Xga/wxga Tft-lcd Timing Controller With Reduced Swing Differential Signaling (RSDS™) Outputs
FPD87392AXA +3.3V Tft-lcd Timing Controller For Dual LVDS Inputs/dual RSDS Outputs For Tft-lcd Monitor And Notebook Not Recommended For New ...
G1-200B-85-1.6 Processor Series Low Power Integrated X86 Solution
G1-200P-85-1.6
G1-233B-85-1.8
G1-266B-85-1.8
G1-300B-85-2.0
GD54LS08 54LS08 - Quad 2-Input And Gate, Package: Lcc, Pin Nb=20
GD54LS161A DM54LS161A - Synchronous 4-Bit Binary Counter With Asynchronous Clear, Package: Cerdip, Pin Nb=16
GD54LS175 DM54LS175 - Quad D Flip-flop With Clear And Complementary Outputs, Package: Cerpack, Pin Nb=16
GD54LS32 DM54LS32 - Quad 2-Input OR GATE, Package: Lcc, Pin Nb=20
GEODEGXLVPROCESSORSeries Low Power Integrated X86 Solution
GEODEGXMPROCESSOR Integrated X86 Solution With Mmx(tm) Support
GL-166B-85-2.2 Geode Processor Series Low Power Integrated X86 Solutions
GL-166P-85-2.2
GL-180B-85-2.2
GL-180P-85-2.2
GM-180B-70 Geode Processor Integrated X86 Solution With MMX Support

ADC12048 : ADC12048 - 12-Bit Plus Sign 216 KHZ 8 Channel Sampling Analog to Digital Converter, Package: Pqfp, Pin Nb=44

LM2574HVM-12 : LM2574 - Simple Switcher 0.5A Step-down Voltage Regulator, Package: Soic Wide, Pin Nb=14

LMX2377UTMX : Dual Integer PLLs LMX2377U - Pllatinum Ultra Low Power Dual Frequency Synthesizer For RF Personal Communications LMX2377U 2.5 GHz/1.2 Ghz, Package: Evaluation Board, Pin Nb=-

LP2983 : Positive Voltage->Fixed LP2983 - Micropower 150 ma Voltage Regulator in SOT-23 Package For Output Voltages Less_than_or_equal 1.2V, Package: SOT-23, Pin Nb=5

LME49830TB : Mono High Fidelity 200 Volt MOSFET Power Amplifier Input Stage With Mute The LME49830 is a high fidelity audio power amplifier input stage designed for demanding consumer and pro-audio applications. Amplifier output power may be scaled by changing the supply voltage and number of output devices. Th

VJ0805A102FLJAC68 : Synchronous Buck Controller with Pre-bias Startup, and Optional Clock Synchronization

ADC10040CIMTX : 10-bit, 40 Msps, 3V, 55.5 mW A/D Converter

DM54LS83A : Quad 2-input Exclusive-or Gates

COP8SGR544N8 : 8-bit CMOS ROM Based and OTP Microcontrollers with 8k to 32k Memory, Two Comparators and Usart

Same catergory

422LCOR : Two Channel Rs-232 to Rs-422 Converter. This to RS-422 converter converts unbalanced RS-232 signals to balanced voltage digital interface to allow communications of 90K bits per second on cable lengths of 4000 feet. Ten receivers can be connected to any one driver for use in multi-drop systems. The RS-232 port uses a female DB-25 type of connector with pins 2 (TD input) and 3 (RD output).

AD2A : Sei/rs232 Adapter. The AD2-A adapter allows the RS485-like signal of SEI devices to interface to a standard RS232 port (25-pin DSUB), such as those in IBM compatible PCs. The SEI (Serial Encoder Interface) bus is a simple, quick and convenient network of SEI devices interfacing a RS232 serial port. The SEI bus supports from to 15 devices on a single 6-wire telephone-type.

DS21S07A : Scsi Terminator. Fully compliant with SCSI­1, Fast SCSI and Ultra Backward compatible to the DS2107 and DS2107A Provides active termination for nine signal lines Laser­trimmed 110 ohm termination resistors have Low dropout voltage regulator Power­down mode isolates termination resistors DS21S07AS 16­PIN SOIC (300 MIL) TERMPWR1 HS­GND R4 R5 HS­GND VREF1 GND PD VREF2.

HI-3282 : Arinc 429 Serial Transmitter And Dual Receiver. ARINC 429 SERIAL TRANSMITTER AND DUAL RECEIVER ! ARINC 429 compatible ! Compatible with Industry-standard alternate parts ! Small footprint 44-pin PQFP package option ! 16-Bit parallel data bus ! Direct receiver interface to ARINC bus ! Internal Lightning Protection of ARINC inputs per DO-160D, Level in -10 configurations ! Timing control 10 times the data.

LC4100C : LCD Dot Matrix Common Driver For STN Display. The is a common driver for large-scale dot matrix LCD panels. It includes a 240-bit bidirectional shift register and 4-level LCD driver circuits. The number of bits can be further increased by using the provided input and output pins to connect multiple LC4100Cs in cascade. The LC4100C and LC4101C form a large-screen LCD panel driver chip set. Fabricated.

LSI53C141 : SCSI bus expanders and enclosure. Scsi Bus Expander Technical Manual V2.1 11/00.

MC100E446 : 4:1 Parallel/serial Converter. The is an integrated 4-bit parallel to serial data converter. The device is designed to operate for NRZ data rates to 1.3 Gb/s. The chip generates a divide by 4 and a divide by 8 clock for both 4-bit conversion and a two chip 8-bit conversion function. The conversion sequence was chosen to convert the parallel data into a serial stream from bit D3. A serial.

ML65245 : High Speed Octal Buffer Transceivers. The ML65245 and ML65L245 are non-inverting octal transceivers. The high operating frequency (50MHz driving a 50pF load) and low propagation delay ­ 2ns) make them ideal for very high speed applications such as processor bus buffering and cache and main memory control. These transceivers use a unique analog implementation to eliminate the delays inherent.

PCI500-4A : Ac/dc Compact Pci Power Supply.

PCM2702 : . For most current data sheet and other product information, visit www.burr-brown.com q INTEGRATED USB INTERFACE: Full-Speed Transceiver Supports 12Mbps Data Transfer. Fully Compliant with the USB 1.0 . Adaptive Mode for Isochronous Transfer. Self-Powered Device. q ACCEPTS 16-BIT STEREO AND MONO USB AUDIO DATA STREAMS. q ANALOG PERFORMANCE (VCC = 5V):.

SLA24C01-D : 1/2 Kbit 128/256 X 8 Bit Serial CMOS EePROMs, I2c Synchronous 2-wire Bus.

SN65LBC031 : . SN65LBC031Q, SN75LBC031 HIGH-SPEED CONTROLLER AREA NETWORK (CAN) TRANSCEIVERS SN75LBC031 Meets Standard ISO/DIS 11898 (up 500 k Baud) Driver Output Capability 50 mA Wide Positive and Negative Input/output Bus Voltage Range Bus Outputs Short-Circuit-Protected to Battery Voltage and Ground Thermal Shutdown Available in Q-Temp Automotive ­ HighRel Automotive.

TD62083AF : Package = SOP18 ;; Function = 8ch. Darlington Sink Driver ;; Rating = 50V / 0.5A.

TPIC44H01 : 4-channel Serial And Parallel High-side Pre-FET Driver. Serial or Parallel Control of Gate Outputs Sleep State for Low Quiescent Current Independent On-State Source Short-to-Ground (Shorted-Load) Detection/Protection Independent On-State Over-Current Detection/Protection With Dynamic Fault Threshold Independent Off-State Open-Load Detection Supply Over-Voltage Lockout Protection Asynchronous Open-Drain Fault.

UC1717 : Stepper Motor Drive Circuit. Half-step and Full-step Capability Bipolar Constant Current Motor Drive Built-in Fast Recovery Schottky Commutating Diodes Wide Range of Current Control 5-1000mA Wide Voltage Range 10-45V Designed for Unregulated Motor Supply Voltage Current Levels can be Selected in Steps or Varied Continuously Thermal Overload Protection The UC3717 has been designed.

UC2708 : Dual Non-inverting Power Driver. 3.0A Peak Current Totem Pole Output to 35V Operation 25ns Rise and Fall Times 25ns Propagation Delays Thermal Shutdown and UnderVoltage Protection The UC1708 family of power drivers is made with a high-speed, high-voltage, Schottky process to interface control functions and high-power switching devices ­ particularly power MOSFETs. Operating over to 35 volt.

MAX9247 : 27-Bit, 2.5MHz-to-42MHz DC-Balanced LVDS Serializer The MAX9247 digital video parallel-to-serial converter serializes 27 bits of parallel data into a serial-data stream. Eighteen bits of video data and 9 bits of control data are encoded and multiplexed onto the serial interface, reducing the serial-data rate. The data-enable input determines when the video.

ADUM3200 : Dual-Channel, Digital Isolators, Enhanced System-Level ESD Reliability Product The ADuM320x* are dual-channel, digital isolators based on Analog Devices' iCoupler® technology. Combining high speed CMOS and monolithic transformer technology, these isolation components provide outstanding performance characteristics superior to alternatives such as optocoupler.

MAX14840E : 40Mbps, +3.3V, RS-485 Half-Duplex Transceivers The MAX14840E/MAX14841E are +3.3V ESD-protected transceivers intended for half-duplex RS-485 communication up to 40Mbps. These transceivers are optimized for high speeds over extended cable runs while maximizing tolerance to noise. The MAX14840E symmetrical fail-safe and larger receiver hysteresis, providing.

 
0-C     D-L     M-R     S-Z