Digchip : Database on electronics components
Electronic components database
Search:                      In section:
Member, Distributor  
Log In
Email:
Password:

Details, datasheet, quote on part number:LM5642MTCX
 
 
Part:LM5642MTCX
Category:Power Management => Regulators => Switching Regulators
Description:High Voltage, Dual Synchronous Buck Converter with Oscillator Synchronization The LM5642 consists of two current mode synchronous buck regulator controllers operating 180° out of phase with each other at a normal switching frequency of 200kHz. Out of phase operation reduces the input ripple RMS current, thereby significantly reducing the required input capacitance. The switching frequency can be synchronized to an external clock between 150kHz and 250kHz. The two switching regulator outputs can also be paralleled to operate as a dual-phase single output regulator. The output of each channel can be independently adjusted from 1.3 to 90% of Vin. An internal 5V rail is also available externally for driving bootstrap circuitry. Current-mode feedback control assures excellent line and load regulation and a wide loop bandwidth for excellent response to fast load transients. Current is sensed across either the Vds of the top FET or across an external current-sense resistor connected in series with the drain of the top FET. The LM5642 features analog soft-start circuitry that is independent of the output load and output capacitance making the soft-start behavior more predictable and controllable than traditional soft-start circuits. Over-voltage protection is available for both outputs. A UV-Delay pin is also available to allow delayed shut off time for the IC during an output under-voltage event. Features Two synchronous buck regulators 180° out of phase operation Synchronizable switching frequency from 150kHz to 250kHz 4.5V to 36V input range 50ľA Shutdown current Adjustable output from 1.3V to 90% of Vin 0.04% (typical) line and load regulation error Current mode control with or without a sense resistor Independent enable/soft-start pins allow simple sequential startup configuration. Configurable for single output parallel operation. (See ) Adjustable cycle-by-cycle current limit Input under-voltage lockout Output over-voltage latch protection Output under-voltage protection with delay Thermal shutdown Self discharge of output capacitors when the regulator is OFF TSSOP package Applications Embedded Computer Systems Telecom Systems Set-Top Boxes WebPAD Point Of Load Power Architectures
Company:National Semiconductor Corporation
Datasheet:Download LM5642MTCX datasheet   File size : 684 kB
Request For quote:  Find where to buy LM5642MTCX