|
|
Part: LM6161WG-QMLV
Category:
Description: High Speed Operational Amplifier
Company: National Semiconductor Corporation
Datasheet: Download LM6161WG-QMLV datasheet File size : 284 kB
Request For quote: Find where to buy LM6161WG-QMLV
Datasheet text preview:
LM6161/LM6261/LM6361 High Speed Operational Amplifier
May 1999
LM6161/LM6261/LM6361 High Speed Operational Amplifier
General Description
The LM6161 family of high-speed amplifiers exhibits an excellent speed-power product in delivering 300 V/µs and 50 MHz unity gain stability with only 5 mA of supply current. Further power savings and application convenience are possible by taking advantage of the wide dynamic range in operating supply voltage which extends all the way down to +5V. These amplifiers are built with National's VIPTM (Vertically Integrated PNP) process which provides fast PNP transistors that are true complements to the already fast NPN devices. This advanced junction-isolated process delivers high speed performance without the need for complex and expensive dielectric isolation. n n n n n n n n High unity gain freq 50 MHz Low supply current 5 mA Fast settling 120 ns to 0.1% Low differential gain < 0.1% Low differential phase 0.1° Wide supply range 4.75V to 32V Stable with unlimited capacitive load Well behaved; easy to apply
Applications
n n n n n Video amplifier High-frequency filter Wide-bandwidth signal conditioning Radar Sonar
Features
n High slew rate 300 V/µs
Connection Diagrams
10 Lead Flatpak
DS009057-13
See NS Package Number W10A
DS009057-5
See NS Package Number J08A, N08E or M08A Temperature Range Military -55°C TA +125°C Industrial -25°C TA +85°C LM6261N LM6161J/883 5962-8962101PA LM6261M LM6161WG/883 5962-8962101XA LM6161W/883 5962-8962101HA LM6361M Commercial 0°C TA +70°C LM6361N LM6361J 8-Pin Molded DIP 8-Pin Ceramic DIP 8-Pin Molded Surface Mt. 10-Lead Ceramic SOIC 10-Pin Ceramic Flatpak W10A WG10A M08A J08A N08E Package NSC Drawing
VIPTM is a trademark of National Semiconductor Corporation.
© 1999 National Semiconductor Corporation
DS009057
www.national.com
Absolute Maximum Ratings (Note 12)
If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (V+ - V-) Differential Input Voltage (Note 8) Common-Mode Voltage Range (Note 10) Output Short Circuit to GND (Note 1) Soldering Information Dual-In-Line Package (N, J) Soldering (10 sec.) Small Outline Package (M) Vapor Phase (60 sec.) Infrared (15 sec.) 36V
See AN-450 "Surface Mounting Methods and Their Effect on Product Reliability" for other methods of soldering surface mount devices. Storage Temp Range -65°C to +150°C Max Junction Temperature 150°C ± 700V ESD Tolerance (Notes 6, 7)
± 8V
(V+ - 0.7V) to (V- + 0.7V) Continuous
Operating Ratings (Note 12)
Temperature Range (Note 2) LM6161 LM6261 LM6361 Supply Voltage Range -55°C TJ +125°C -25°C TJ +85°C 0°C TJ +70°C 4.75V to 32V
260°C 215°C 220°C
DC Electrical Characteristics
The following specifications apply for Supply Voltage = ± 15V, VCM = 0, RL 100 k and RS = 50 unless otherwise noted. Boldface limits apply for TJ = TMIN to TMAX; all other limits TJ = 25°C. Symbol Parameter Conditions Typ LM6161 Limit (Notes 3, 11) VOS VOS Drift Ib IOS IOS Drift RIN CIN AVOL Input Offset Voltage Input Offset Voltage Average Drift Input Bias Current Input Offset Current Input Offset Current Average Drift Input Resistance Input Capacitance Large Signal Voltage Gain VCM Input Common-Mode Voltage Range -13.2 Supply = +5V (Note 4) 1.8 CMRR PSRR Common-Mode Rejection Ratio Power Supply Rejection Ratio -10V VCM +10V 94 90 4.0 Differential AV = +1 @ 10 MHz VOUT = ± 10V, RL = 2 k (Note 9) RL = 10 k (Note 9) Supply = ± 15V 325 1.5 750 2900 +14.0 +13.9 +13.8 -12.9 -12.7 3.9 3.8 2.0 2.2 80 74 80 74 +13.9 +13.8 -12.9 -12.7 3.9 3.8 2.0 2.2 80 76 80 76 +13.8 +13.7 -12.8 -12.7 3.8 3.7 2.1 2.2 72 70 72 70 550 300 550 400 400 350 k pF V/V Min V/V Volts Min Volts Min Volts Min Volts Max dB Min dB Min 2 150 0.4 3 6 350 800 3 5 350 600 5 6 1500 1900 µA Max nA Max nA/°C 5 10 7 10 LM6261 Limit (Note 3) 7 9 LM6361 Limit (Note 3) 20 22 mV Max µV/°C Units
± 10V V± ± 16V
www.national.com
2
DC Electrical Characteristics
Symbol Parameter
(Continued)
The following specifications apply for Supply Voltage = ± 15V, VCM = 0, RL 100 k and RS = 50 unless otherwise noted. Boldface limits apply for TJ = TMIN to TMAX; all other limits TJ = 25°C. Conditions Typ LM6161 Limit (Notes 3, 11) VO Output Voltage Swing Supply = ± 15V and RL = 2 k +14.2 -13.4 Supply = +5V and RL = 2 k (Note 4) Output Short Circuit Current Sink IS Supply Current 65 5.0 Source 4.2 1.3 65 +13.5 +13.3 -13.0 -12.7 3.5 3.3 1.7 2.0 30 20 30 20 6.5 6.8 LM6261 Limit (Note 3) +13.5 +13.3 -13.0 -12.8 3.5 3.3 1.7 1.9 30 25 30 25 6.5 6.7 LM6361 Limit (Note 3) +13.4 +13.3 -12.9 -12.8 3.4 3.3 1.8 1.9 30 25 30 25 6.8 6.9 Volts Min Volts Min Volts Min Volts Max mA Min mA Min mA Max Units
AC Electrical Characteristics
The following specifications apply for Supply Voltage = ± 15V, VCM = 0, RL 100 k and RS = 50 unless otherwise noted. Boldface limits apply for TJ = TMIN to TMAX; all other limits TJ = 25°C. LM6161 Symbol GBW Parameter Gain-Bandwidth Product SR Slew Rate Supply = ± 5V AV = +1 (Note 8) Supply = ± 5V (Note 8) VOUT = 20 VPP 10V Step to 0.1% AV = -1, RL = 2 k NTSC, AV = +4 NTSC, AV = +4 f = 10 kHz f = 10 kHz 35 300 200 4.5 120 45 200 180 PBW tS m AD D enp-p inp-p Power Bandwidth Settling Time Phase Margin Differential Gain Differential Phase Input Noise Voltage Input Noise Current 200 180 200 180 Conditions
@ f = 20 MHz
LM6261 Limit (Note 3) 40 35
LM6361 Limit (Note 3) 35 32 MHz Min MHz V/µs Min V/µs MHz ns Deg % Deg Units
Typ 50
Limit (Notes 3, 11) 40 30
< 0.1
0.1 15 1.5
Note 1: Continuous short-circuit operation at elevated ambient temperature can result in exceeding the maximum allowed junction temperature of 150°C. Note 2: The typical junction-to-ambient thermal resistance of the molded plastic DIP (N) is 105°C/W, the molded plastic SO (M) package is 155°C/W, and the cerdip (J) package is 125°C/W. All numbers apply for packages soldered directly into a printed circuit board. Note 3: Limits are guaranteed by testing or correlation. Note 4: For single supply operation, the following conditions apply: V+ = 5V, V- = 0V, VCM = 2.5V, VOUT = 2.5V. Pin 1 & Pin 8 (Vos Adjust) are each connected to Pin 4 (V-) to realize maximum output swing. This connection will degrade VOS, VOS Drift, and Input Voltage Noise. Note 5: CL 5 pF. Note 6: In order to achieve optimum AC performance, the input stage was designed without protective clamps. Exceeding the maximum differential input voltage results in reverse breakdown of the base-emitter junction of one of the input transistors and probable degradation of the input parameters (especially Vos, Ios, and Noise).
3
www.national.com
Others parts begin by lm
LM-1 LM-2 LM-3 LM-4 LM-5 LM-6 LM-7 LM-8 LM-9 LM-10 LM-11 LM-12 LM-13 LM-14 LM-15 LM-16 LM-17 LM-18 LM-19 LM-20 LM-21 LM-22 LM-23 LM-24 LM-25 LM-26 LM-27 LM-28 LM-29 LM-30 LM-31 LM-32 LM-33 LM-34 LM-35 LM-36 LM-37 LM-38 LM-39 LM-40 LM-41 LM-42 LM-43 LM-44 LM-45 LM-46 LM-47 LM-48 LM-49 LM-50 LM-51 LM-52 LM-53 LM-54 LM-55 LM-56 LM-57 LM-58 LM-59 LM-60 LM-61 LM-62 LM-63 LM-64 LM-65
|
|
|
