Details, datasheet, quote on part number: NJM2591
CategoryMultimedia => Video
Description100MHz Input 450kHz FM if Demodulator For Voice
CompanyNJR Corporation
DatasheetDownload NJM2591 datasheet
Cross ref.Similar parts: AA32416, TA31136, UA31136
Find where to buy


Features, Applications

The is a low-voltage, low-current FM IF demodulator IC for voice application. It includes an oscillator, mixer, limiting amplifier, quadrature detector, and active filter. The NJM2591 also has a noise detector and noise comparator with hysteresis range. NJM2591V


Low operating Voltage to 9.0V Low Operating Current V+ =2.0V Operating Frequency to 100MHz (reference value) IF Input Frequency 450kHz (standard) Noise detector, noise comparator Bipolar Technology Package Outline SSOP16

PARAMETER Supply Voltage Power Dissipation Operating Temperature Storage Temperature SYMBOL V+ PD Topr Tstg RATINGS +125 (Ta=25°C) UNIT mW °C


PARAMETER Current Consumption Mixer Conversion Gain Mixer 3rd Order Intercept Mixer Input Resistance Mixer Input Capacitance Mixer Output Resistance 12dB S/N Sensitivity Audio Output Level Signal to Noise Ratio AM Rejection Raito IF Amplifier Input Resistance

fmod=1kHz, fdev=±1.5KHz, unless otherwise noted.) SYMBOL Iccq Gmix IP RinM CinM V od S/N AMR RinIF IF input Vi=80dBuVEMF IF input Vi=80dBuVEMF IF input, AM=30% Vi=80dBuVEMF TEST CONDITIONS No signal Without ceramic filter MIN. TYP. 24 96 TBD MAX. UNIT mA dB dBuV pF k dBuV mVrms dB k

[CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.


Related products with the same datasheet
Some Part number from the same manufacture NJR Corporation
NJM2591V 100MHz Input 450kHz FM if Demodulator For Voice
NJM2592 470MHz Input 455kHz FM if Demodulator
NJM2593 FM if Demodulator <<<>>>The NJM2593 is a Wide-operating Voltage, Low-current<<<>>>fm if Demodulator ic With 450kHz(standard) if Frequency.<<<>>>it Includes an Oscillator, Mixer, Limiting Amplifier, Quadrature<<<>>>detector,
NJM2594 Double Balanced Modulation / Demodulation
NJM2595 5-INPUT 3-OUTPUT Video Switch
NJM2596 5-Input 3-Output Video Switch For S2
NJM2606 Low Voltage DC Motor Controller
NJM2611 Servo Motor Controller
NJM2624A Brush Less DC Motor Pre-driver
NJM2625 PWM Type 3-PHASE DC Brushless Motor Contorol ic
NJM2626 PWM Type 3-Phase DC Brushless Motor Driver ic
NJM2640 Two-phase Unipolar DC Brushless Motor Pre-driver ic
NJM2641 2-Phase DC Brushless Motor Pre-driver ic
NJM2650 Hall Amplifier ic
NJM2670 Dual H Bridge Driver
NJM2671 2-Phase Unipolar Stepper Motor Driver
NJM2672 Dual H-bridge Driver <<<>>>The NJM2672 is a Dual H-bridge Driver IC, Which Consists of a Ls-ttl Compatible Logic Input Stage And Two H-bridge Output Stage With Built-protection Diode.<<<>>>the Output Current
NJM2700 SRS Wow Audio Processor
NJM2701 3D Surround Audio Processor

NJM12904M : Single Supply Dual Operational Amplifier

NJM2113M : Low Voltage Audio Power Amplifier

NJM2574RB1 : Low Voltage Video Amplifier With LPF

NJM2742RB1 : High Speed Single Supply Dual Operational Amplifier The NJM2742 is a High Speed Single Supply Operationalamplifier .The Low Vol Enables to Treat Small Outputsignal on a Single Has Wide Supply Voltage Range, +3 to +32 Volt Andhigh Slew Rate.the NJM2742 is

NJU3712 : 8 Bit Serial to Parallel Converter

NJU6391W : Quartz Crystal Oscillator Quartz Crystal Oscillator

NJU7096V : Low-power And Low-offset-voltage C-mos Dual Operational Amplifier

NJU7262M30 : C-mos Step-up Switching Regulator

NJX3561 : Schottky Barrier Diode

NJU7008F3-TE1# : Linear - Amplifier - Instrumentation, Op Amps, Buffer Amp Integrated Circuit (ics) General Purpose Cut Tape (CT) 200µA 1 V ~ 5.5 V; IC OPAMP CMOS LOW-PWR SC88A Specifications: Packaging: Cut Tape (CT) ; Amplifier Type: General Purpose ; Number of Circuits: 1 ; Package / Case: 6-TSSOP (5 lead), SC-88A, SOT-353 ; Slew Rate: 2.4 V/µs ; Gain Bandwidth Product: 1MHz ; Current - Supply: 200µA ; Current - Output / Channel: 200µA ; Voltage - Supply, Single/Dual (±

NJM2856DL3-05-TE1 : Pmic - Voltage Regulator - Linear (ldo) Integrated Circuit (ics); IC REG LDO 5.0V 1.3A TO-252-5 Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

Same catergory

gm7030 : Video Interconnect Controller.

HMP8191CN : Ntsc/pal Video Encoder. The HMP8190 and HMP8191 are NTSC and PAL encoders designed for use in systems requiring the generation of highquality NTSC and PAL video. YCbCr digital video data drive the P0-P15 inputs. The Y data is optionally lowpass filtered to 6MHz and drives the Y analog output. Cb and Cr are each lowpass filtered to 1.3MHz, quadrature modulated, and added together.

ICS620-01 : Image Clocking/Control. Digital Still Camera Clock Source. The is a low cost, low jitter, high performance clock synthesizer for digital still cameras. Using analog Phase-Locked Loop (PLL) techniques, the device uses a 14.318 MHz crystal input to produce multiple output clocks required in the camera. It provides selectable NTSC/PAL clock, a selectable processor clock, a selectable CCD clock, and a selectable.

KIA6213S : = 0.5W Single Power Amp. ;; Package = SIP-9.

LAG668 : ic For Headphone Stereos (bass Boost). This IC was developed to provide bass boost functions without deviating from the basic design concept of Mitsumi's LAG665, which is highly regarded for applications in headphone stereos for overseas markets in particular. Bass boost functions are widely adopted in models for overseas markets as well. However, because of stringent cost constraints, there.

OP176 : Audio PreAmp/Amp. Bipolar/JFET, Audio Operational Amplifier. Low Noise: 6 nV/Hz High Slew Rate: 25 V/µs Wide Bandwidth: 10 MHz Low Supply Current: 2.5 mA Low Offset Voltage: 1 mV Unity Gain Stable SO-8 Package APPLICATIONS Line Driver Active Filters Fast Amplifiers Integrators GENERAL 200 µV. This allows the to be used in many dc coupled or summing applications without the need for special selections or the added.

SAA7335 : Encoder/Decoder. SAA7335; DSP For CD And DVD ROM Systems. Preliminary Supersedes data of 1997 Aug 11 File under Integrated Circuits, IC01 2001 apr 05 Compatibility with CD-I, CD-ROM, MPEG-video DVD-ROM and DVD-video applications Designed for very high playback speeds Typical CD-ROM operation = 12, DVD-ROM = 1.9, maximum rates (tbf) Matched filtering, quad-pass error correction (C1-C2-C1-C2), overspeed audio.

SL1935C : Tuners->Satellite Tuners. = Single Chip Zero if L-band Tuner For DSS And DVB Satellite Receivers With PLL Synthesizer ;; Package Type = Ssop ;; No. Of Pins = 36.

TA7709P : Dual Preamplifier ( 3v Use ).

TDA7233 : 1W Audio Amplifier With Mute. OPERATING VOLTAGE TO 15V EXTERNAL MUTE OR POWER DOWN FUNCTION IMPROVED SUPPLY VOLTAGE REJECTION LOW QUIESCENT CURRENT HIGH POWER CAPABILITY LOW CROSSOVER DISTORTION The is a monolithic integrated circuit in 8 pin Minidip or SO8 package, intended for use as class AB power amplifier with a wide range of supply voltage from 15V in portable players, cordless.

TDA8928J : Power Stage 2 X 10 or 1 X 20 W Class-d Audio Amplifier.the TDA8928J is a Switching Power Stage For a High Efficiency Class-d Audio Power Amplifier System. With This Power Stage a Compact 2 X 10 W Self Oscillating Digital Amplifier System CAN be Built, Operating With High Efficiency And Very Low Dissipation. No Heatsink is Required. The System Operates.

TVP3010M : Video InterfacE PALette. IMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. TI warrants performance of its semiconductor.

UTC2206 : = 2.5W Dual Audio Power Amp Dual Power Amplifier 2.3W 9V 10% ;; Package = DIP-12H ;;.

VPX3226E : Video Pixel Decoder With 4H Comb Filter And Data Broadcast Support. Contents Page Section Title Introduction System Architecture Functional Analog Front-End Input Selector Clamping Automatic Gain Control Analog-to-Digital Converters ADC Range Digitally Controlled Clock Oscillator Adaptive Comb Filter (VPX 3226E only) Color Decoder IF-Compensation Demodulator Chrominance Filter Frequency Demodulator Burst Detection / Saturation.

LM4947 : The LM4947 is an audio subsystem capable of efficiently delivering 500mW (Class D operation) of continuous average power into a mono 8 bridged-tied load (BTL) with 1% THD+N, 37mW (Class AB operation) power channel of continuous average power into stereo 32 single-ended (SE) loads with 1% THD+N, or an output capacitor-less (OCL) configuration with identical.

NCP2990 : The NCP2990 is an audio power amplifier designed for portable communication device applications such as mobile phone applications. The NCP2990 is capable of delivering 1.3 W of continuous average power to an 8.0 Ω load from a 5.0 V power supply, and 1 W to a 4.0 Ω load from a 3.6 V power supply. The NCP2990 provides high quality audio while.

PCM3793A : The PCM3793A/94A is a low-power stereo CODEC designed for portable digital audio applications. The device integrates stereo digital speaker amplifier, headphone amplifier, line amplifier, line input, boost amplifier, microphone bias, programmable gain control, analog mixing, sound effects, and automatic level control (ALC). It is available in a small-footprint,.

ISL59451 : Triple 4:1 DC Restored Single Supply Video Multiplexing Amplifier The ISL59451 is a 4-input, single-supply triple video multiplexer. It a DC restore function that makes it ideally suited for single-supply AC-coupled component video applications where amplifier headroom is a concern. When logic “0” is applied to CLAMP, the sample-hold amplifier loop.

TPA2017D2 : 2.8-W/Ch Stereo Class-D Audio Amplifier With Simple SmartGainTM AGC/DRC (TPA2017) The TPA2017D2 (sometimes referred to as TPA2017) is a stereo, filter-free Class-D audio power amplifier with SmartGain™ dynamic range compression (DRC), automatic gain control (AGC), and noise gate. It is available in a 4 mm x 4mm QFN package. SmartGain™ functions are configured.

OPA1641 : Sound-Plus High-Performance, JFET-Input Audio OpAmps The OPA1641 (single), OPA1642 (dual), and OPA1644 (quad) series are JFET-input, ultralow distortion, low-noise operational amplifiers fully specified for audio applications. The OPA1641, OPA1642, and OPA1644 rail-to-rail output swing allows increased headroom, making these devices ideal for use in any audio.

0-C     D-L     M-R     S-Z