Details, datasheet, quote on part number: nAD1010-25
PartnAD1010-25
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit => 10 bit
DescriptionAnalog to Digital Converter ip
CompanyNordic VLSI
DatasheetDownload nAD1010-25 datasheet
  

 

Features, Applications

FEATURES

2.5V power supply SNR typ 60dB for (fin = 10MHz) Low power (20mW@2.5V) Sample rate:10MSPS Frequency dependent biasing Internal/sample hold Differential input Low input capacitance Evaluation Board Available

APPLICATIONS
Imaging Test equipment Computer scanners Communications Set top boxes Video products

The is a compact, high-speed, low power 10-bit monolithic analog-todigital converter, implemented in the TSMC Mixed-Signal MiM CMOS process. It has 10-bit resolution with 9.5 effective bits, and close to 11 bit dynamic range for video frequency signals. The converter includes a high bandwidth sample and hold. The full scale range is 1V. The full scale range can be set between 0.5V and 1V. It operates from a single 2.5V supply. Its low distortion and high dynamic range offers the performance needed for demanding imaging, multimedia, telecommunications and instrumentation applications. The bias current level for the ADC is automatically adjusted based on the clock input frequency. Hence, the power dissipation of the device is continuously minimised for the current operation frequency.

supply voltage supply current (10 MSPS) power dissipation (10 MSPS) power dissipation (sleep mode) differential nonlinearity integral nonlinearity conversion rate resolution

Except digital output drivers Except digital output drivers fIN=0.9991MHz

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Branch office: Nordic VLSI ASA - P.O.Box 436 Skyen, N-0212 Oslo, Norway - Phone +4722511050 - Fax +4722511099 Revision: 2.1 Page of 11 February 8th, 2001

The nAD1010-25 has a pipelined architecture - resulting in low input capacitance. Digital error correction of the 9 most significant bits ensures good linearity for input frequencies approaching Nyquist. The nAD1010-25 is compact. The core occupies less than 1mm2 of die area in TSMC Mixed Signal MiM 0.25m CMOS process. The fully differential architecture makes it insensitive to substrate noise. Thus it is ideal as a mixed signal ASIC macro cell.

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Branch office: Nordic VLSI ASA - P.O.Box 436 Skyen, N-0212 Oslo, Norway - Phone +4722511050 - Fax +4722511099 Revision: 2.1 Page of 11 February 8th, 2001

(At = 25C, VDD = 2.5V, Sampling Rate = 10MHz, Input frequency = 10MHz dBFS, Differential input signal, 50% duty cycle clock unless otherwise noted).

Midscale offset Common Mode Rejection Ratio (of VOS) Dynamic Performance SINAD Signal to Noise and Distortion Ratio fIN = 1 MHz fIN = 10 MHz SNR Signal to Noise Ratio (without harmonics) fIN = 10 MHz SFDR Spurious Free Dynamic Range fIN = 1 MHz fIN = 10 MHz PSRR Power Supply Rejection Ratio (of VOS) Analog Input VFSR Input Voltage Range (differential) VCMI Common mode input voltage CINA Input Capacitance (differential) Reference Voltages VREFN Negative Input Voltage VREFP Positive Input Voltage 1 VRR Reference input voltage range VCM Common mode output voltage Digital Inputs VIL Logic "0" voltage VIH Logic "1" voltage IIL Logic "0" current (VI=VSS) IIH Logic "1" current (VI=VDD) CIND Input Capacitance Digital Outputs VOL Logic "0" voltage = 2 mA) VOH Logic "1" voltage = 2 mA) tH Output hold time tD Output delay time (table continued on next page)

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Branch office: Nordic VLSI ASA - P.O.Box 436 Skyen, N-0212 Oslo, Norway - Phone +4722511050 - Fax +4722511099 Revision: 2.1 Page of 11 February 8th, 2001


 

Some Part number from the same manufacture Nordic VLSI
nAD10100K-18 Analog to Digital Converter ip
nAD10105-18
nAD10110-18
nAD10110x2-18 Dual Analog to Digital Converter ip
nAD10120-13 Analog to Digital Converter ip
nAD10120x2-13 Dual Analog to Digital Converter ip
nAD1020-18 Analog to Digital Converter ip
nAD1020-25
nAD1030-18
nAD1030-25
nAD1040-18
nAD1040-25
nAD1050-18
nAD1050-25
NAD1060 10-bit 60msps Sampling Analog-to-digital Converter
nAD1060-18 Analog to Digital Converter ip
nAD1060-25
nAD1070-18
NAD1080-18
nAD1210-25
nAD12110-18
Same catergory

AD5320 : 2.7 V to 5.5 V, 140 µA, Rail-to-rail Voltage Output 12-Bit DAC in SOT-23 And Microsoic Packages.

AD9051 : 10-Bit, 60 MSPS A/D Converter. 60 MSPS Sampling Rate 9.3 Effective Number of Bits at fIN = 10.3 MHz 250 mW Total Power at 60 MSPS Selectable Input Bandwidth of 50 MHz or 130 MHz On-Chip T/H and Voltage Reference Single 5 V Supply Voltage 3 V Logic I/O Compatible Input Range and Output Coding Options Available APPLICATIONS Medical Imaging Digital Communications Professional Video.

CA3306 : 6-Bit, 15 Msps, Flash A/D Converters. UCT BS O ter at BSTIT LE SU Support Cen /tsc al om FOR A our Technic ww.intersil.c on SIL o INTER 1-888 CMOS Low Power with Video Speed (Typ). 70mW Parallel Conversion Technique Signal Power Supply Voltage. 7.5V 15MHz Sampling Rate with Single 5V Supply 6-Bit Latched Three-State Output with Overflow Bit Pin-for-Pin Retrofit for the CA3300 The CA3306.

HI3197JCQ : . The is a high-speed D/A converter which can perform the multiplexed input of the two system 10-bit data. The maximum conversion rate achieves 125 MSPS. The multiplexed operation is possible by the 1/2 frequencydivided clock or by halving the frequency of the clock with the clock frequency divider circuit having the reset pin in the IC. The data input.

HI5905IN : . The is a monolithic, 14-bit, 5MSPS Analogto-Digital Converter fabricated in an advanced BiCMOS process. It is designed for high speed, high resolution applications where wide bandwidth, low power consumption and excellent SINAD performance are essential. With a 100MHz full power input bandwidth and high frequency accuracy, the converter is ideal for many.

MAX154 : CMOS High-Speed, 8-Bit ADCs With Multiplexer And Reference. CMOS High-Speed 8-Bit ADCs with Multiplexer and Reference The MAX154/MAX158 are high-speed multi-channel analog-to-digital converters (ADCs). The MAX154 has four analog input channels while the MAX158 has eight channels. Conversion time for both devices is 2.5s. The MAX154/MAX158 also feature a 2.5V on-chip reference, forming a complete high-speed.

MAX187 : +5V, Low-Power, 12-Bit Serial ADCs. 12-Bit Resolution 1/2 LSB Integral Nonlinearity (MAX187A/MAX189A) Internal Track/Hold, 75kHz Sampling Rate Single +5V Operation Low Power: 2A Shutdown Current 1.5mA Operating Current o Internal 4.096V Buffered Reference o 3-Wire Serial Interface, Compatible with SPI, QSPI, and Microwire o Small-Footprint 8-Pin DIP and 16-Pin SO The MAX187/MAX189 serial.

nAD1050-25 : Analog to Digital Converter ip. 2.5V power supply SNR typ 60dB for (fin = 10MHz) Low power (87mW@2.5V) Sample - 50MSPS Frequency dependent biasing Internal/sample hold Differential input Low input capacitance Evaluation Board Available APPLICATIONS Imaging Test equipment Computer scanners Communications Set top boxes Video products The is a compact, high-speed, low power 10-bit monolithic.

PCM1800 : . Single-Ended Analog Input 20-Bit Stereo ANALOG-TO-DIGITAL CONVERTER q DUAL 20-BIT MONOLITHIC ADC q SINGLE-ENDED VOLTAGE INPUT q 64X OVERSAMPLING DECIMATION FILTER: Passband Ripple: 0.05dB Stopband Attenuation: 65dB q HIGH PERFORMANCE: THD+N: -88dB (typ) SNR: 95dB (typ) Dynamic Range: 95dB (typ) Internal High Pass Filter q PCM AUDIO INTERFACE: Master/Slave.

THS1230CDW : ti THS1230, Low Power, High-speed ADC. 12-BIT, 30 MSPS, LOW-POWER ANALOG-TO-DIGITAL CONVERTER WITH POWER DOWN 12-Bit Resolution, 30 MSPS Analog-to-Digital Converter Configurable Input Functions: Single-Ended Single-Ended With Offset Differential 3.3-V Supply Operation Internal Voltage Reference Out-of-Range Indicator Power-Down Mode IF Undersampling applications Set Top Box (STB) Camcorders.

TLV1548 : Low-voltage 10-bit Analog-to-digital Converter With Serial Control And 4/8 Analog Inputs.

VFC121 : Precision Single Power Supply Voltage-to-frequency Converter. Precision Single Power Supply VOLTAGE-TO-FREQUENCY CONVERTER q SINGLE SUPPLY OPERATION: = 1.5MHz max q LOW NONLINEARITY: 0.03% max 100kHz, 0.1% max 1MHz q HIGH INPUT IMPEDANCE q VOLTAGE REFERENCE OUTPUT q THERMOMETER OUTPUT: 1mV/K APPLICATIONS q INTEGRATING A/D CONVERSION q ANALOG SIGNAL TRANSMISSION q PHASE-LOCKED LOOP VCO q GALVANICALLY ISOLATED.

WM8711 : Internet Audio DAC With Integrated Headphone Driver. WM8711 Internet Audio DAC with Integrated Headphone Driver The is a low power stereo DAC with an integrated headphone driver. The WM8711 is designed specifically for portable MP3 audio and speech players. The WM8711 is also ideal for MD, CD machines and DAT players. Stereo 24-bit multi-bit sigma delta DACs are used with oversampling digital interpolation.

AD7656 : 250 kSPS, 6-Channel, Simultaneous Sampling Bipolar 16-Bit A/D Converter The AD7656 contains six 16-bit, fast, low power, successive approximation ADCs all in the one package. The part AD7656 core operates from a single 4.5 V to 5.5 V power supply and throughput rates up to 250 kSPS. The part contains low noise, wide bandwidth track-and-hold amplifiers.

ADS-939 : Sampling A/D Converter Delivers True 16-Bit Performance at 10MHz in a Fully Integrated Package (NYSE: CHP) The ADS-939 sampling A/D converter is a fully integrated data acquisition system that gives true 16-bit resolution performance at a 10MHz sampling rate over the entire operating temperature range, up to full Military. The functionally complete.

ADS8332 : 2.7V-5.5V, 16 Bit 500KSPS Low Power Serial ADC, 8-Ch MUX And Breakout The ADS8331 is a low-power, 16-bit, 500k samples-per-second (SPS) analog-to-digital converter (ADC) with a unipolar, 4-to-1 multiplexer (mux) input. The device includes a 16-bit capacitor-based successive approximation register (SAR) ADC with inherent sample and hold. The ADS8332.

ISL26322 : 12-bit, 250kSPS Low-power ADCs With Single-ended And Differential Inputs And Multiple Input Channels The ISL26320/21/22/23/24/25/29 family of sampling SAR-type ADCs feature excellent linearity over supply and temperature variations, and offer versions with 1-, 2-, 4- and 8-channel single-ended inputs, and 1-, 2- and 4-channel differential inputs. A proprietary.

 
0-C     D-L     M-R     S-Z