Details, datasheet, quote on part number: nAD1060-18
PartnAD1060-18
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit => 10 bit
DescriptionAnalog to Digital Converter ip
CompanyNordic VLSI
DatasheetDownload nAD1060-18 datasheet
  

 

Features, Applications

FEATURES

1.8V power supply SNR typ 59dB for (fin = 10MHz) Low power @ 1.8V and 60MSPS) Frequency dependent biasing Internal Sample/Hold Differential input Low input capacitance Power Down and Sleep Mode

APPLICATIONS

Imaging Test equipment Computer scanners Wireless communication Powerline communication Set top boxes Video products

The is a compact, high-speed, low power 10-bit monolithic analog-todigital converter, implemented a 0.18m single poly CMOS process with MiM capacitor option. The converter includes a high bandwidth sample and hold. Using internal references, the full scale range is 0.75V. The full scale range can be set between 0.5V and 0.75V using external references. It operates from a single 1.8V supply. Its low distortion and high dynamic range offers the performance needed for demanding imaging, multimedia, telecommunications and instrumentation applications. The bias current level for the ADC is automatically adjusted based on the clock input frequency. Hence, the power dissipation of the device is continuously minimised for the current operation frequency.

Supply voltage Supply current (60 MSPS) Power dissipation (10 MSPS) Power dissipation (60 MSPS) Differential nonlinearity Integral nonlinearity Conversion rate Resolution

Except digital output drivers Except digital output drivers fIN=0.9991MHz

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 3.0 Page of 11 August 31st 2001

The nAD1060-18 has a pipelined architecture - resulting in low input capacitance. Digital error correction of the 9 most significant bits ensures good linearity for input frequencies approaching Nyquist. The nAD1060-18 is compact. The core occupies less than 0.9mm2 of die area in a standard single poly 0.18m CMOS process. The fully differential architecture makes it insensitive to substrate noise. Thus it is ideal as a mixed signal ASIC macro cell.

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 3.0 Page of 11 August 31st 2001

(At = 25C, VDD = 1.8V, Sampling Rate = 60MHz, Input frequency = 10MHz, Differential input signal, 50% duty cycle clock unless otherwise noted )

DC Accuracy Differential Nonlinearity fIN = 0.9991 MHz Integral Nonlinearity fIN = 0.9991 MHz Midscale offset Common Mode Rejection Ratio Gain Error Dynamic Performance Signal to Noise Ratio (without harmonics) fIN = 10 MHz fIN = 40 MHz Signal to Noise and Distortion Ratio fIN = 10 MHz Spurious Free Dynamic Range fIN = 10 MHz fIN = 40 MHz Analog Input Voltage Range (differential) Common mode input voltage Input Capacitance (from each input to ground) Reference Voltages Internal reference voltage on pin 10 Internal reference voltage on pin 11 Internal reference voltage drift Negative Input Voltage Positive Input Voltage Reference input voltage range 1) Common mode output voltage Switching Performance Conversion Rate Pipeline Delay Aperture delay, IP Output hold time, IP Output delay time, IP Aperture delay, with bonding pad Output hold time, with bonding pad Output delay time, with bonding pad

VREFNI VREFPI VREFNO VREFPO VREFP-VREFN VCM FS tAP th td tAP th td VIL VIH IIL IIH CIND

Logic "0" voltage Logic "1" voltage Logic "0" current (VI=VSS) Logic "1" current (VI=VDD) Input Capacitance

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 3.0 Page of 11 August 31st 2001


 

Some Part number from the same manufacture Nordic VLSI
nAD1060-25 Analog to Digital Converter ip
nAD1070-18
NAD1080-18
nAD1210-25
nAD12110-18
nAD1215-18T
nAD1220-18
nAD1220-18T
nAD1220-25
nAD1230-18
nAD1230-18T
nAD1230-18TS
nAD1230-25
nAD1240-18T
nAD1240-18TS
nAD1240-25
nAD1250-18T
nAD1250-25
nAD1260-18T
nAD1260-25
nAD1270-18T
Same catergory

AD7302 : 2.7 V to 5.5 V, Parallel Input Dual Voltage Output 8-Bit DAC. Two 8-Bit DACs In One Package 20-Lead DIP/SOIC/TSSOP Package +5.5 V Operation Internal and External Reference Capability DAC Power-Down Function Parallel Interface On-Chip Output Buffer Rail-to-Rail Operation Low Power Operation 3 mA max 3.3 V Power-Down 1 A max 25 C APPLICATIONS Portable Battery Powered Instruments Digital Gain and Offset Adjustment.

AD7870SQ : Lc2mos Complete, 12-bit, 100 Khz, Sampling ADCs. Complete Monolithic 12-Bit ADC with: 2 s Track/Hold Amplifier 8 s A/D Converter On-Chip Reference Laser-Trimmed Clock Parallel, Byte and Serial Digital Interface 72 dB SNR at 10 kHz Input Frequency 57 ns Data Access Time Low Power: 60 mW typ Variety of Input Ranges: 3 V for +5 V for 10 V for AD7876 The is a fast, complete, 12-bit A/D converter. It consists.

AD871 : Complete 12-Bit 5 MSPS Monolithic A/D Converter. Monolithic 12-Bit 5 MSPS A/D Converter Low Noise: 0.17 LSB RMS Referred to Input No Missing Codes Guaranteed Differential Nonlinearity Error: 0.5 LSB Signal-to-Noise and Distortion Ratio: 68 dB Spurious-Free Dynamic Range: 73 dB Power Dissipation: 1.03 W Complete: On-Chip Track-and-Hold Amplifier and Voltage Reference Pin Compatible with the AD872 Twos.

DAC7614 : . Quad, Serial Input, 12-Bit, Voltage Output DIGITAL-TO-ANALOG CONVERTER q LOW POWER: 20mW q UNIPOLAR OR BIPOLAR OPERATION q SETTLING TIME: q 12-BIT LINEARITY AND MONOTONICITY: +85C q USER SELECTABLE RESET TO MIDSCALE OR ZERO-SCALE q SECOND-SOURCE for DAC8420 q SMALL 20-LEAD SSOP PACKAGE APPLICATIONS q ATE PIN ELECTRONICS q PROCESS CONTROL q CLOSED-LOOP.

DAC7742Y/250 : ti DAC7742, 16-Bit, Single Channel, Parallel Interface With Internal Reference.

DAC80 : . q INDUSTRY STANDARD PINOUT q FULL 10V SWING WITH VCC 12VDC q DIGITAL INPUTS ARE TTL- AND CMOS-COMPATIBLE q GUARANTEED S WITH 12V AND 15V SUPPLIES q 1/2LSB MAXIMUM NONLINEARITY: +70C q SETTLING TIME: 4s max 0.01% of Full Scale q GUARANTEED MONOTONICITY: +70C q TWO PACKAGE OPTIONS: Hermetic sidebrazed ceramic and low-cost molded plastic resistors,.

FMS9875x100 : 100MSPS And YPBPR Graphics Digitizer. 108/140 Ms/s conversion rate RGB and YPBPR clamps 444 and 422 output timing Adjustable Gain and offset Internal Reference Voltage I2C/SMBus compatible Serial Port 100-pin package The ADC sampling clock can be derived from either an external source or from incoming horizontal sync using the internal PLL. Setup and control is via registers accessible.

M62332 : Mitsubishi 8-bit 2ch I2c Bus da Converter With Buffer Amplifiers. The is an integrated circuit semiconductor of CMOS structure with 2 channels of built in D-A converters with output buffer operational amplifiers. The input is 2-wires serial method is used for the transfer format of digital data to allow connection with a microcomputer with minimum wiring. The output buffer operational amplifier employs AB class output.

MAX1444 : 10-Bit, 40Msps, +3.0V, Low-power ADC With Internal Reference. o Single +3.0V Operation o Excellent Dynamic Performance 59.5dB SNR at fIN 20MHz 74dBc SFDR at fIN 20MHz o Low Power 19mA (Normal Operation) 5A (Shutdown Mode) o Fully Differential Analog Input o Wide 2Vp-p Differential Input Voltage Range 400MHz -3dB Input Bandwidth o On-Chip +2.048V Precision Bandgap Reference o CMOS-Compatible Three-State Outputs.

MAX500 : CMOS, Quad, Serial Interface 8-Bit DAC. The is a quad, 8-bit, voltage-output digital-toanalog converter (DAC) with a cascadable serial interface. The IC includes four output buffer amplifiers and input logic for an easy-to-use, two- or three-wire serial interface. In a system with several MAX500s, only one serial data line is required to load all the DACs by cascading them. The MAX500 contains.

MAX531AEPD : +5v, Low-power, Voltage-output, Serial 12-bit DACs. The MAX531/MAX538/MAX539 are low-power, voltageoutput, 12-bit digital-to-analog converters (DACs) specified for single +5V power-supply operation. The MAX531 can also be operated with 5V supplies. The MAX538/MAX539 draw only 140A, and the MAX531 (with internal reference) draws only 260A. The MAX538/MAX539 come in 8-pin DIP and SO packages, while.

SP8531 : 12-bit Sampling Serial Out Analog to Digital Converter. 12 Bit Resolution Single +5Volt Supply Internal Reference, 1.25V Unipolar to +2.5 Volt Input Range Fast, 3.75 s Conversion Time Fast Power Shutdown/Turn-On Mode 3-Wire Synchronous Serial High Speed Interface s 2A Shutdown Mode (10W) s Low Power CMOS 60mW typical The is a sampling 12-Bit serial out analog to digital converter. The device contains.

TLC3574 : . TLC2578 5-V ANALOG, 3-/5-V DIGITAL, 200-KSPS, 4-/8-CHANNEL SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH 10-V INPUTS 14-Bit Resolution for TLC3574/78, 12-Bit for TLC2574/2578 Maximum Throughput 200-KSPS Multiple Analog Inputs: 8 Single-Ended Channels for 4 Single-Ended Channels for TLC3574/2574 Analog Input Range: 10 V Pseudodifferential Analog Inputs.

WM2152 : WM2152 : 12-BIT, 30MSPS Analogue to Digital Converter.

AD9460 : 16-Bit, 80/105 MSPS ADC Preliminary The AD9460 is a 16-bit, monolithic, sampling analog-to-digital converter (ADC) with an on-chip track-and-hold circuit. It is optimized for performance, small size, and ease of use. The product operates up to 105 MSPS, providing superior SNR for instrumentation, medical imaging, and radar receivers employing baseband.

LTC2356-12 : The LTC2356-12/LTC2356-14 are 12-bit/14-bit, 3.5Msps serial ADCs with differential inputs. The devices draw only 5.5mA from a single 3.3V supply and come in a tiny 10-lead MSOP package. A Sleep shutdown feature further reduces power consumption to 13W. The combination of speed, low power and tiny package makes the LTC2356-12/ LTC2356-14 suitable for high.

ADS5474 : 14-bit, 400 MSPS Analog-to-Digital Converter with Buffered Input The ADS5474 is a 14-bit, 400-MSPS analog-to-digital converter (ADC) that operates from both a 5-V supply and 3.3-V supply while providing LVDS-compatible digital outputs. This ADC is one of a family of 12-, 13-, and 14-bit ADCs that operate from 210 MSPS to 500 MSPS. The ADS5474 input.

MAX1162 : 16-Bit, +5V, 200ksps ADC With 10A Shutdown The MAX1162 low-power, 16-bit analog-to-digital converter (ADC) a successive-approximation ADC, automatic power-down, fast 1.1s wakeup, and a high-speed SPI/QSPI/MICROWIRE-compatible interface. The MAX1162 operates with a single +5V analog supply and a separate digital supply, allowing direct interfacing.

 
0-C     D-L     M-R     S-Z