Details, datasheet, quote on part number: NAD1080-18
PartNAD1080-18
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit => 10 bit
DescriptionAnalog to Digital Converter ip
CompanyNordic VLSI
DatasheetDownload NAD1080-18 datasheet
  

 

Features, Applications

FEATURES

1.8V power supply SNR typ 59dB for (fin = 10MHz) Low power @ 1.8V and 80MSPS) Compact area (0.86mm2) Frequency dependent biasing Differential input Low input capacitance Three power saving idle modes

APPLICATIONS

Imaging Wireless communication WLAN/IEEE 802.11x DVB receivers Powerline communication Video products

The is a compact, high-speed, low power 10-bit monolithic analog-todigital converter, implemented a 0.18m single poly CMOS process with MiM capacitor option. The converter includes a high bandwidth sample and hold. Using internal references, the full scale range is 0.75V. The full scale range can be set between 0.5V and 0.75V using external references. It operates from a single 1.8V supply. Its low distortion and high dynamic range offers the performance needed for demanding imaging, multimedia, telecommunications and instrumentation applications. The bias current level for the ADC is automatically adjusted based on the clock input frequency. Hence, the power dissipation of the device is continuously minimised for the current operation frequency. The nAD1080-18 has a pipelined architecture - resulting in low input capacitance. Digital error correction of the 9 most significant bits ensures good linearity for input frequencies approaching Nyquist. The nAD1080-18 is compact. The core occupies less than 0.9mm2 of die area in a standard single poly 0.18m CMOS process with MiM capacitor option. The fully differential architecture makes it insensitive to substrate noise. Thus it is ideal as a mixed signal ASIC macro cell.

Supply voltage Power dissipation (80 MSPS) Differential nonlinearity Integral nonlinearity Signal to noise ratio Spurious free dynamic range

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 4.1 Page of 10 February 7th 2002

(At = 25C, VDD = 1.8V, Sampling Rate = 80MHz, Input frequency = 10MHz, Differential input signal, 50% duty cycle clock and 300nF Reference decoupling unless otherwise noted)

DC Accuracy Differential Nonlinearity fIN = 0.9991 MHz Integral Nonlinearity fIN = 0.9991 MHz Midscale offset Common Mode Rejection Ratio Gain Error Dynamic Performance Signal to Noise Ratio (without harmonics) fIN = 10 MHz fIN = 40 MHz fIN = 72 MHz 1) Signal to Noise and Distortion Ratio fIN = 10 MHz Spurious Free Dynamic Range fIN = 10 MHz fIN = 40 MHz fIN = 72 MHz Analog Input Voltage Range (differential) Analog input common mode voltage Input Capacitance (from each input to ground) Input signal attenuation @ 70MHz Reference Voltages Internal reference voltage on pin 10 Internal reference voltage on pin 11 Internal reference voltage drift Negative Input Voltage (external ref) Positive Input Voltage (external ref) Reference input voltage range 2) Common mode voltage output Switching Performance Maximum Conversion Rate Minimum Conversion Rate Pipeline Delay Aperture delay, IP Output hold time, 0.8 pF load) Output delay time, 0.8 pF load) Aperture delay, with bonding pad Output hold time, with bonding pad Output delay time, with bonding pad

Logic "0" voltage Logic "1" voltage Logic "0" current (VI=VSS) Logic "1" current (VI=VDD) Input Capacitance 0.4 AVDD

(table continued on next page) 1) Requires clock source jitter in the order of 1ps.

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 4.1 Page of 10 February 7th 2002

Digital Outputs Logic "0" voltage = 2 mA) Logic "1" voltage = 2 mA) Power Supply voltage Supply current (except digital output) Supply voltage Power dissipation (except digital output) (active 10 MSPS) Power dissipation (except digital output) (active 80 MSPS) Power dissipation (except digital output) Power Down Mode Power dissipation (except digital output) Sleep Mode Power dissipation (except digital output) Standby Mode Start-up time from Power down Start-up time from Sleep mode Start-up time from Stand By Output driver supply voltage Junction operating temperature

Test Level I: 100% production tested at +25C Test Level II: 100% production tested at +25C and sample tested at specified temperatures Test Level III: Sample tested only Test Level IV: Parameter is guaranteed by design and characterization testing Test Level V: Parameter is typical value only Test Level VI: 100% production tested at +25C. Guaranteed by design and characterization testing for industrial temperature range

Supply voltages VDD............................... to +2.2V OVDD.............................. to 3.6V Temperatures Operating to +125C Storage Temperature.. to +125C

Analog In............ 0.2V to VDD + 0.2V Digital In........................ to 3.6V REFP.................... 0.2V to VDD + 0.2V REFN................... 0.2V to VDD + 0.2V CLOCK.......................... to 3.6V Note: Stress above one or more of the limiting values may cause permanent damage to the device.

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 4.1 Page of 10 February 7th 2002


 

Some Part number from the same manufacture Nordic VLSI
nAD1210-25 Analog to Digital Converter ip
nAD12110-18
nAD1215-18T
nAD1220-18
nAD1220-18T
nAD1220-25
nAD1230-18
nAD1230-18T
nAD1230-18TS
nAD1230-25
nAD1240-18T
nAD1240-18TS
nAD1240-25
nAD1250-18T
nAD1250-25
nAD1260-18T
nAD1260-25
nAD1270-18T
NAD1280-18
nAD1280-18T
nAD1280-18TS
Same catergory

AD7303 : +2.7 V to +5.5 V, Serial Input, Dual Voltage Output 8-Bit DAC. Two 8-Bit DACs in One Package 8-Pin DIP/SOIC and microSOIC Packages +5.5 V Operation Internal & External Reference Capability Individual DAC Power-Down Function Three-Wire Serial Interface QSPITM, SPITM and MicrowireTM Compatible On-Chip Output Buffer Rail-to-Rail Operation On-Chip Control Register Low Power Operation: 3.3 V Full Power-Down 1 A max,.

AD7671 : 16-Bit 1 MSPS Bipolar Pulsar ADC. Throughput: 1 MSPS (Warp Mode) 800 kSPS (Normal Mode) INL: 2.5 LSB Max 0.0038% of Full Scale) 16-Bit Resolution with No Missing Codes S/(N + D): 90 dB Typ @ 250 kHz THD: 100 dB Typ @ 250 kHz Analog Input Voltage Ranges: Bipolar: 2.5 V Unipolar: 2.5 V Both AC and DC s No Pipeline Delay Parallel (8/16 Bits) and Serial V/3 V Interface Single 5 V Supply.

ADS-941 : 1mhz Sampling ADC: 14-bit. 14-bit resolution 1MHz minimum sampling rate Functionally complete Internal reference and sample/hold No missing codes Excellent performance Full Nyquist-rate sampling Small 32pin DIP Low power, 2.8 Watts DATEL's is a functionally complete, 14-bit, 1MHz, sampling A/D converter. Its standard, 32-pin, triple-wide ceramic DIP contains a fast-settling.

ADS5103 : . 1.8-V ANALOG SUPPLY, 10-BIT, 65/40 MSPS ANALOG-TO-DIGITAL CONVERTERS WITH INTERNAL REFERENCE ADS5102 (65 MSPS) ADS5103 (40 MSPS) D Differential Input 1.8 V Analog/Digital Supply D Digital Outputs Compatible With or 3.3 Logic Signal-to-Noise: at 20 MHz (ADS5103) Spurious Free Dynamic Range: at 20 MHz (ADS5102) 105-mW Power Dissipation 336 W Power-Down.

ADS7800 : . q 333k SAMPLES PER SECOND q STANDARD 10V AND 5V INPUT RANGES q DC PERFORMANCE OVER TEMP: No Missing Codes 1/2LSB Integral Linearity Error 3/4LSB Differential Linearity Error q AC PERFORMANCE OVER TEMP: 72dB Signal-to-Noise Ratio 80dB Spurious-free Dynamic Range 80dB Total Harmonic Distortion q INTERNAL SAMPLE/HOLD, REFERENCE, CLOCK, AND 3-STATE OUTPUTS.

DAC1054 : Quad 10-bit Voltage-output Serial D/A Converter With Readback (obsolete).

HI5766 : 10-Bit, 60 MSPS A/D Converter. The is a monolithic, 10-bit, analog-to-digital converter fabricated in a CMOS process. It is designed for high speed applications where wide bandwidth and low power consumption are essential. Its 60 MSPS speed is made possible by a fully differential pipelined architecture with an internal sample and hold. The HI5766 has excellent dynamic performance.

THS1031 : 2.7 V to 5.5 v, 10-bit, 30 MSPS CMOS Analog-to-digital Converter. 10-Bit Resolution, 30 MSPS Analog-to-Digital Converter Configurable Input Functions: Single-Ended Single-Ended With Analog Clamp Single-Ended With Programmable Digital Clamp Differential Built-In Programmable Gain Amplifier (PGA) Differential Nonlinearity: 0.3 LSB Signal-to-Noise: 56 dB Spurious Free Dynamic Range: 60 dB Adjustable Internal.

TLC4541ID : ti TLC4541, 16-Bit 200KSPS ADC Serial Out, Auto Pwrdn, Single-ended Input.

TLV5631 : 8-channel, 12-/10-/8-bit, 2.7-v to 5.5-v Low Power Digital-to-analog Converters With Power Down And Internal Reference.

UDA1330A : UDA1330ATS; Low-cost Stereo Filter DAC;; Package: SOT369-1 (SSOP16). Product Supersedes data of 2000 April 18 File under Integrated Circuits, IC01 2001 Feb 02 General Low power consumption Power supply voltage from 5.5 V Selectable control via L3 microcontroller interface or via static pin control System clock frequencies 256fs, 384fs and 512fs selectable via L3 interface or 256fs and 384fs via static pin control Supports.

AD5063 : 2.7V-5.5V, Full Accurate 16-Bit Vout nanoDAC Converter, Unbuffered, in a MSOP The AD5063, a member of the nanoDAC family, is a single full accurate 16-bit unbuffered voltage out DAC in a MSOP package. The 16-bit DAC provides a maximum 1 LSB INL linearity error Available in 10-lead MSOP 16 Bit Accurate, MAX 1 LSB INL Low Glitch on Power-up High speed.

ADS5440 : 13 Bit, 210MSPS Pipeline ADC The ADS5440 is a 13-bit 210 MSPS analog-to-digital converter (ADC) that operates from a 5 V supply, while providing LVDS-compatible digital outputs from a 3.3 V supply. The ADS5440 input buffer isolates the internal switching of the onboard track and hold (T&H) from disturbing the signal source. An internal reference generator.

MAX11661 : 500ksps, Low-Power, Serial 12-/10-/8-Bit ADCs The MAX11661MAX11666 are 12-/10-/8-bit, compact, low-power, successive approximation analog-to-digital converters (ADCs). These high-performance ADCs include a high-dynamic range sample-and-hold and a high-speed serial interface. These ADCs accept a full-scale input from 0V to the power supply or to the reference.

 
0-C     D-L     M-R     S-Z