Details, datasheet, quote on part number: nAD12110-18
PartnAD12110-18
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit => 12 bit
DescriptionAnalog to Digital Converter ip
CompanyNordic VLSI
DatasheetDownload nAD12110-18 datasheet
  

 

Features, Applications

FEATURES

12-bit ADC to 110 MSPS Conversion Rate Single 1.8 V Power Supply 1.5 V p-p Differential Input Excellent Dynamic Performance 67 dBc SNR at FIN = 10 MHz 70 dBc SFDR at FIN = 10 MHz 600 MHz Analog Input Bandwidth Low Power Consumption at 110 MSPS at 25 MSPS Dynamic Power Scaling Power Saving Idle Modes Internal Voltage Reference 0.86 mm Core Area

TIMING GENERATOR DIGITAL CONTROL DIGITAL CORRECTION
APPLICATIONS

Communication Receive Channel WLAN / HiperLan / 802.11x Digital Imaging / Video TV / Video / Radio Decoders Graphic Capture demanding applications like broadband communication, digital imaging and multimedia. The ADC consumes only at 110 MSPS operation. Dynamic power scaling means that the power consumption is scaled with the operating frequency resulting in only 30 mW consumption at 25 MSPS operation. Combined with power saving idle modes the ADC is suitable for battery powered devices. The conversion is controlled by the single-ended clock input. Output data is available in a binary offset coded format. Three out-of-range indicator bits are also available for determining if the input signal is over-range, under-range or out-of-range. Implemented in a generic 0.18 m CMOS process, operating from a single 1.8 V supply and employing a fully differential architecture it represents an ideal ADC for highly integrated mixed-signal systems.

The is a monolithic, high-speed, low power, analog-to-digital converter silicon IP. It uses a fully differential multistage pipeline architecture with digital error correction to provide 12-bit accuracy from to 110 MSPS conversion speed. The core includes a wide-band sample-andhold and an internal voltage reference that provides a nominal full-scale range 1.5 V peak-to-peak. The IP is designed for high dynamic performance at input frequencies up to Nyquist and beyond. It thus represents an ideal solution for

Supply Voltage Power Dissipation, @ FCLK = 110 MHz Differential Non Linearity Integral Non Linearity Signal-to-Noise Ration, FIN = 10 MHz Spurious-Free-Dynamic Range, FIN = 10 MHz Hard Macro / TSMC Generic, 6 Metal 0.18 m CMOS 0.86 mm

Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway

PRELIMINARY PRODUCT SPECIFICATION 12-bit 110 MSPS Analog-to-Digital Converter IP ELECTRICAL SPECIFICATIONS DC SPECIFICATIONS

= 25 C, VAVDD = VVDD 1.8 V, FCLK = 110 MHz, FIN = 10 MHz, internal references, differential full-scale input signal, 50 % duty cycle clock, and 10nF reference decoupling unless otherwise noted )

DC ACCURACY Resolution No Missing Codes Guaranteed Monotonicity Guaranteed Integral Non Linearity Differential Non Linearity Gain Error Offset Error ANALOG INPUT Input Differential Voltage Range Input Common Mode Voltage Input Impedance Analog Input Bandwidth REFERENCE VOLTAGES Internal Positive Voltage Reference Internal Negative Voltage Reference Internal Reference Range Internal Differential Full-scale Range Internal Reference Common Mode Voltage Internal Voltage Reference Drift External Reference Range External Differential Full Scale Range External Reference Common Mode Voltage POWER SUPPLY Positive Analog Supply Voltage Positive Digital Supply Voltage Negative Supply Voltage Supply Current, Active Supply Current, Standby Supply Current, Sleep Supply Current, Power down Power Dissipation, Active Power Dissipation, Standby Power Dissipation, Sleep Power Dissipation, Power down OPERATING CONDITIONS Junction Operating Temperature

N NMC MON INL DNL G VOS VFSR VVCM,EXT AIBW VREFP VREFN VRR FSR VVCM VRR,EXT FSREXT VRCM,EXT VAVDD VVDD VSS IDD

PRELIMINARY PRODUCT SPECIFICATION 12-bit 110 MSPS Analog-to-Digital Converter IP

= 25 C, VAVDD = VVDD 1.8 V, FCLK = 110 MHz, FIN = 10 MHz, internal references, differential full-scale input signal, 50 % duty cycle clock, and 10nF reference decoupling unless otherwise noted )

SWITCHING PERFORMANCE Maximum Conversion Rate Minimum Conversion Rate Input Clock Duty Cycle Pipeline Delay ( Latency ) Output Data Delay Time Output Data Hold Time Aperture Delay Time Aperture Uncertainty ( Jitter ) Start-up Time from Standby Mode Start-up Time from Sleep Mode Start-up Time from Power Down Mode Out-of-Range Recovery Time SIGNAL-TO-NOISE RATIO 110 MSPS, FIN = 10 MHz 110 MSPS, FIN = 40 MHz 110 MSPS, FIN = 72 MHz SIGNAL-TO-NOISE-AND DISTORTION RATIO 110 MSPS, FIN = 10 MHz 110 MSPS, FIN = 40 MHz 110 MSPS, FIN = 72 MHz SPURIOUS FREE DYNAMIC RANGE 110 MSPS, FIN = 10 MHz 110 MSPS, FIN = 40 MHz 110 MSPS, FIN = 72 MHz EFFECTIVE NUMBER OF BITS 110 MSPS, FIN = 5 MHz 110 MSPS, FIN = 10 MHz 110 MSPS, FIN = 40 MHz 110 MSPS, FIN = 72 MHz

FCLK,MAX FCLK,MIN tpd td th tad tjitter tstandby tsleep tpower down tout-of-range SNR

 

Some Part number from the same manufacture Nordic VLSI
nAD1215-18T Analog to Digital Converter ip
nAD1220-18
nAD1220-18T
nAD1220-25
nAD1230-18
nAD1230-18T
nAD1230-18TS
nAD1230-25
nAD1240-18T
nAD1240-18TS
nAD1240-25
nAD1250-18T
nAD1250-25
nAD1260-18T
nAD1260-25
nAD1270-18T
NAD1280-18
nAD1280-18T
nAD1280-18TS
NAD1280-25 12-bit 80msps Sampling Analog-to-digital Converter
NAD2167 12-bit 20 MSPS Sampling Analog-to-digital Converter
Same catergory

ADC08061 : ADC08061 - 500 NS A/D Converter With S/h Function And Input Multiplexer, Package: Soic Wide, Pin Nb=20.

ADC12040 : ADC12040 - 12-Bit, 40 Msps, 340mW A/D Converter With Internal Sample-and-Hold, Package: Lqfp, Pin Nb=32.

ADS-30639 : Dual, 14-bit, 6.4mhz Sampling A/D Converter. 14-bit resolution 6.4MHz sampling rate Functionally complete No missing codes over full military temperature range Edge-triggered, 1.7 Watts Small, 28-pin, ceramic DDIP Ideal for both time and frequency-domain applications FUNCTION INPUT "A" RANGE +2.5V REFERENCE ANALOG GROUND +5VA START CONVERT "A" SELECT BIT 14 (LSB) BIT 13 BIT 12 BIT 11 BIT 10 BIT 9 BIT 8 PIN FUNCTION.

ADS1241 : . q 24 BITS NO MISSING CODES q SIMULTANEOUS 50Hz AND 60Hz REJECTION (90dB MINIMUM) q 0.0015% INL q 21 BITS EFFECTIVE RESOLUTION (PGA 1), 19 BITS (PGA 128) q PGA GAINS FROM 128 q SINGLE CYCLE SETTLING q PROGRAMMABLE DATA OUTPUT RATES q EXTERNAL DIFFERENTIAL REFERENCE 5V q ON-CHIP CALIBRATION q SPITM COMPATIBLE TO 5.25V SUPPLY RANGE q 600W POWER CONSUMPTION.

ADS2806 : . q SPURIOUS-FREE DYNAMIC RANGE: at 10MHz fIN q HIGH SNR: (3Vp-p) q INTERNAL OR EXTERNAL REFERENCE q LOW DLE: 0.4LSB q FLEXIBLE INPUT RANGE: q TQFP-64 POWER PACKAGE APPLICATIONS q COMMUNICATIONS IF PROCESSING q COMMUNICATIONS BASESTATIONS q TEST EQUIPMENT q MEDICAL IMAGING q VIDEO DIGITIZING q CCD DIGITIZING The is a dual, high-speed, high dynamic range,.

DAC7625P : ti DAC7625, 12-Bit Quad Voltage Output Digital-to-analog Converter. q LOW POWER: 20mW q UNIPOLAR OR BIPOLAR OPERATION q SETTLING TIME: q 12-BIT LINEARITY AND MONOTONICITY: +85C q RESET TO MID-SCALE (DAC7624) OR ZERO-SCALE (DAC7625) q DATA READBACK q DOUBLE-BUFFERED DATA INPUTS The DAC7624 and DAC7625 are 12-bit quad voltage output digital-to-analog converters with guaranteed 12bit monotonic performance over the specified.

DAC8562 : +5 Volt, Parallel Input Complete 12-Bit DAC. Complete 12-Bit DAC No External Components Single +5 Volt Operation 1 mV/Bit with 4.095 V Full Scale True Voltage Output, 5 mA Drive Very Low Power 3 mW APPLICATIONS Digitally Controlled Calibration Servo Controls Process Control Equipment PC Peripherals The is a complete, parallel input, 12-bit, voltage output DAC designed to operate from a single.

PCM1750 : . Dual CMOS 18-Bit Monolithic Audio ANALOG-TO-DIGITAL CONVERTER q DUAL 18-BIT LOW-POWER CMOS AUDIO A/D CONVERTER q FAST 4.5s MIN CONVERSION TIME INCLUDING S/H q VERY LOW MAX THD+N: 88dB Without External Adjust q COMPLETE WITH INTERNAL REFERENCE AND DUAL S/H FUNCTION q TWO CO-PHASE SAMPLED, 2.75V AUDIO INPUTS q CAPABLE OF 4X PER CHANNEL OVERSAMPLING.

PCM67 : Advanced 1-bit Bicmos Dual 18-bit Digital-to-analog Converter. q 18-BIT RESOLUTION DUAL AUDIO DAC q EXCELLENT THD PERFORMANCE: (92dB) at F/S, K Grade 60dB, K Grade q HIGH S/N RATIO: 110dB typ (IHF-A) q DUAL, CO-PHASE q SINGLE SUPPLY +5V OPERATION q LOW POWER: 75mW typical q CAPABLE OF 16X OVERSAMPLING q AVAILABLE IN SPACE SAVING 16-PIN DIP OR 20-PIN SOIC q OPERATING TEMP RANGE: +85C q EXTREMELY LOW GLITCH ENERGY.

ADC08D1000 : Dual 8-Bit, 1 GSPS A/D Converter The ADC08D1000 is a dual, low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 1.6 GSPS. Consuming a typical 1.6 Watts at 1 GSPS from a single 1.9 Volt supply, this device is guaranteed to have no missing codes over the full operating temperature.

ADE7768 : Single Phase Energy Metering IC with Integrated Oscillator and Positive Only Accumulation The ADE7768 is an accurate electrical energy measurement integrated circuit. It is a pin reduction version of ADE7755 with an enhancement of a precise oscillator circuit that serves as a clock source to the chip. The ADE7768 eliminates the cost of an external crystal.

ADC121S625 : 12-Bit, 50 ksps to 200 ksps, Differential Input, Micro Power Sampling A/D Converter The ADC121S625 is a 12-bit, 50 ksps to 200 ksps sampling Analog-to-Digital (A/D) converter that a fully differential, high impedance analog input and an external reference. While best performance is achieved with reference voltage between 500mV and 2.5V, the reference.

ADS5527 : ADS5527 is a high performance 12-bit, 210-MSPS A/D converter. It offers state-of-the art functionality and performance using advanced techniques to minimize board space. With high analog bandwidth and low jitter input clock buffer, the ADC supports both high SNR and high SFDR at high input frequencies. It programmable gain options that can be used to improve.

ADC10DV200 : Dual 10-bit, 200 MSPS Low-Power A/D Converter With Parallel LVDS/CMOS Outputs The ADC10DV200 is a monolithic analog-to-digital converter capable of converting two analog input signals into 10-bit digital words at rates up to 200 Mega Samples Per Second (MSPS). The digital output mode is selectable and can be either differential LVDS or CMOS signals.

ADS4225 : 12 Bit 125MSPS Dual Low Power ADC The ADS424x/422x are low-speed variants of the ADS42xx ultralow-power family of dual-channel, 14-bit/12-bit analog-to-digital converters (ADCs). Innovative design techniques are used to achieve high-dynamic performance, while consuming extremely low power with 1.8V supply. This topology makes the ADS424x/422x well-suited.

 
0-C     D-L     M-R     S-Z