Details, datasheet, quote on part number: nAD1215-18T
PartnAD1215-18T
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit => 12 bit
DescriptionAnalog to Digital Converter ip
CompanyNordic VLSI
DatasheetDownload nAD1215-18T datasheet
  

 

Features, Applications

FEATURES

3.3V power supply SINAD min 63.2dB for fin = 50MHz Low power @ 3.3V and 15MSPS) Frequency dependent biasing Internal, wideband Track/Hold Differential input Low input capacitance Power Down and Sleep Mode

APPLICATIONS

Imaging Test equipment Computer scanners Wireless communication Powerline communication Set top boxes Video products

The is a compact, high-speed, low power 12-bit monolithic analog-todigital converter, implemented a 0.18µm single poly CMOS process with MiM capacitors and thick oxide transistor option. It has 12-bit resolution with 11 effective bits at low input frequencies, and close to 12 bit dynamic range for video frequency signals. The converter includes a high bandwidth track and hold. Using internal references, the full scale range is ±1V. The full scale range can be set between ±0.75V and ±1.0V using external references. It operates from a single 3.3V supply, while I/O is biased with 1.8V. Its low distortion and high dynamic range offers the performance needed for demanding imaging, multimedia, telecommunications and instrumentation applications. The bias current level for the ADC is automatically adjusted based on the clock input frequency. Hence, the power dissipation of the device is continuously minimised for the current operation frequency.

Supply voltage Supply current (15 MSPS) Power dissipation (15 MSPS) Differential nonlinearity Integral nonlinearity Conversion rate Resolution

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.3 Page of 11 September , 2001

The nAD1215-18T has a pipelined architecture - resulting in low input capacitance. Digital error correction of the 11 most significant bits ensures good linearity for input frequencies approaching Nyquist. The nAD1215-18T is compact. The core occupies less than 4mm2 of die area in the TSMC MiM 0.18µm CMOS process with thick oxide option. The fully differential architecture makes it insensitive to substrate noise. Thus it is ideal as a mixed signal ASIC macro cell.

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.3 Page of 11 September , 2001

(At = 25°C, VDD = 3.3V, Sampling Rate = 15MHz, Input frequency = 15MHz, Differential input signal, 50% duty cycle clock unless otherwise noted )

DC Accuracy Differential Nonlinearity fIN = 0.9991 MHz Integral Nonlinearity fIN = 0.9991 MHz Midscale offset Common Mode Rejection Ratio Gain Error Dynamic Performance Signal to Noise Ratio (without harmonics) fIN = 10 MHz fIN = 50 MHz Signal to Noise and Distortion Ratio fIN = 10 MHz fIN = 50 MHz Spurious Free Dynamic Range fIN = 10 MHz fIN = 50 MHz Analog Input Voltage Range (differential) Common mode input voltage Input Capacitance (from each input to ground) Reference Voltages Internal reference voltage drift Negative Input Voltage Positive Input Voltage Reference input voltage range 1) Common mode output voltage Switching Performance Conversion Rate Pipeline Delay Aperture delay, IP Output hold time, IP Output delay time, IP Aperture delay, with bonding pad Output hold time, with bonding pad Output delay time, with bonding pad

Logic "0" voltage Logic "1" voltage Logic "0" current (VI=VSS) Logic "1" current (VI=VDD) Input Capacitance µA pF

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.3 Page of 11 September , 2001


 

Some Part number from the same manufacture Nordic VLSI
nAD1220-18 Analog to Digital Converter ip
nAD1220-18T
nAD1220-25
nAD1230-18
nAD1230-18T
nAD1230-18TS
nAD1230-25
nAD1240-18T
nAD1240-18TS
nAD1240-25
nAD1250-18T
nAD1250-25
nAD1260-18T
nAD1260-25
nAD1270-18T
NAD1280-18
nAD1280-18T
nAD1280-18TS
NAD1280-25 12-bit 80msps Sampling Analog-to-digital Converter
NAD2167 12-bit 20 MSPS Sampling Analog-to-digital Converter
NAD8200 8-bit 200 MSPS Analog-to- Digital Converter
Same catergory

AD7531JN : 10-bit, 12-bit, Multiplying D/A Converters. The AD7520/AD7530 and AD7521/AD7531 are monolithic, high accuracy, low cost 10-bit and 12-bit resolution, multiplying digital-to-analog converters (DAC). Intersil' thin-film on CMOS processing gives to 10-bit accuracy with TTL/CMOS compatible operation. Digital inputs are fully protected against static discharge by diodes to ground and positive supply.

AD9214 : 10-Bit, 105 MSPS Analog-to-digital Converter. SNR @ 39 MHz Analog Input (­0.5 dBFS) Low Power at 65 MSPS at 105 MSPS 30 mW Power-Down Mode 300 MHz Analog Bandwidth On-Chip Reference and Track/Hold 1 V p-p 2 V p-p Analog Input Range Option Single 3.3 V Supply Operation V­3.6 V) Two's Complement or Offset Binary Data Format Option APPLICATIONS Battery-Powered Instruments Hand-Held Scopemeters Low-Cost.

ADC0819 : 8-bit Serial I/o A/D Converter With 19-channel Multiplexer (discontinued).

ADS7818 : . For most current data sheet and other product information, visit www.burr-brown.com 12-Bit High Speed Low Power Sampling ANALOG-TO-DIGITAL CONVERTER q 500kHz THROUGHPUT RATE q 2.5V INTERNAL REFERENCE q LOW POWER: 11mW q SINGLE SUPPLY +5V OPERATION q DIFFERENTIAL INPUT q SERIAL INTERFACE q GUARANTEED NO MISSING CODES q MINI-DIP-8 AND MSOP-8 q UNIPOLAR.

ADS7862Y/250 : ti ADS7862, Dual 500kHz, 12-Bit, 2+2 CH Simultaneous Sampling Analog-to-digital Converter.

CXD2302Q : 8-bit 50MSPS Video A/D Converter With Clamp Function. The an 8-bit CMOS A/D converter for video with synchronizing clamp function. The adoption of 2 step-parallel method achieves low power consumption and a maximum conversion rate of 50MSPS. Resolution: 8 bit ± 1/2LSB (DL) Maximum sampling frequency: 50MSPS Low power consumption: 125mW (at 50MSPS typ.) (reference current excluded) Synchronizing clamp function.

DAC8541Y/250 : ti DAC8541, Low Power, 16-Bit D-to-a Converter W/1.8V Compatible Parallel IF, Rail-to-rail Voltage Output.

MAX1003 : Low-Power, 90Msps, Dual 6-Bit ADC. o Two Matched 6-Bit ADCs o High Sampling Rate: 90Msps per ADC o Low Power Dissipation: 350mW o Excellent Dynamic Performance: 5.85 ENOB with 20MHz Analog Input 5.7 ENOB with 50MHz Analog Input o ±1/4LSB INL and DNL (typ) o Internal Bandgap Voltage Reference o Internal Oscillator with Overdrive Capability 55MHz (-0.5dB) Bandwidth Input Amplifiers with.

MXB7843 : MXB7843 2.375V to 5.25V, 4-Wire Touch-screen Controller. The is an industry-standard 4-wire touchscreen controller. It contains a 12-bit sampling analogto-digital converter (ADC) with a synchronous serial interface and low on-resistance switches for driving resistive touch screens. The MXB7843 uses an external reference. The MXB7843 can make absolute or ratiometric measurements. The MXB7843 has two auxiliary.

PHD32UAA : Phd32 Series . 32a Non-isolated DC/DC Converter 5v, 3.3v Input Dual Output.

SP7545 : 12-bit, Buffered Multiplying DAC. s ±1.0 LSB Relative Accuracy Over Temperature s Monotonic to 12­Bits Over Temperature s High Stability, Segmented Architecture s Proprietary, Low TCR Thin­Film Resistor Technology s Operates With to +15V Power Supplies s On-Board, Level­Triggered Latches s 2kVESD Protection on all Digital Inputs The is a low­cost, high stability 12­bit CMOS multiplying.

TLV0834 : . 8-Bit Resolution to 3.6-V VCC Easy Microprocessor Interface or Stand-Alone Operation Operates Ratiometrically or With VCC Reference or 8-Channel Multiplexer Options With Address Logic Input Range V to VCC With VCC Reference Remote Operation With Serial Data Link Inputs and Outputs Are Compatible With TTL and MOS Conversion Time µs at f(CLK) = 250 kHz Functionally.

PCM4204 : 24-Bit/192kHz, 118dB, 4-Channel Audio A/D ConverterThe PCM4204 is a high-performance, four-channel analog-to-digital (A/D) converter designed for professional and broadcast audio applications. The PCM4204 architecture utilizes a 1-bit delta-sigma modulator per channel incorporating a novel density modulated dither scheme for improved dynamic performance.

LTC2381-16 : 16-Bit, 250ksps, Low Power SAR ADC With Serial Interface The LTC®2381-16 is a low noise, low power, high speed 16-bit successive approximation register (SAR) ADC. Operating from a 2.5V supply, the LTC2381-16 has a ±2.5V fully differential input range. The LTC2381-16 consumes only 3.25mW and achieves ±2LSB INL max, no missing codes at 16-bits and 92dB.

AD9633 : Quad, 12-Bit, 80/105/125 MSPS Serial LVDS 1.8 V A/D Converter The AD9633 is a quad, 12-bit, 80 MSPS/105 MSPS/125 MSPS analog-to-digital con­verter (ADC) with an on-chip sample-and-hold circuit designed for low cost, low power, small size, and ease of use. The product operates at a conversion rate of up to 125 MSPS and is optimized for outstanding dynamic.

 
0-C     D-L     M-R     S-Z