Details, datasheet, quote on part number: nAD1230-18
PartnAD1230-18
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit => 12 bit
DescriptionAnalog to Digital Converter ip
CompanyNordic VLSI
DatasheetDownload nAD1230-18 datasheet
  

 

Features, Applications

FEATURES

1.8V power supply SNR typ 65dB for (fin = 10MHz) Low power @ 1.8V and 30MSPS) Compact area (1.2mm2) Frequency dependent biasing Differential input Low input capacitance Three power saving idle modes

APPLICATIONS

Imaging Wireless communication WLAN/IEEE 802.11x DVB receivers Powerline communication Video products

The is a compact, high-speed, low power 12-bit monolithic analog-todigital converter, implemented in the TSMC logic 0.18m CMOS process. No mixed mode process options are needed. The converter includes a high bandwidth sample and hold. Using internal references, the full scale range is 0.75V. The full scale range can be set between 0.5V and 0.75V using external references. It operates from a single 1.8V supply. Its low distortion and high dynamic range offers the performance needed for demanding imaging, multimedia, telecommunications and instrumentation applications. The bias current level for the ADC is automatically adjusted based on the clock input frequency. Hence, the power dissipation of the device is continuously minimised for the current operation frequency. The nAD1230-18 has a pipelined architecture - resulting in low input capacitance. Digital error correction of the 11 most significant bits ensures good linearity for input frequencies approaching Nyquist. The nAD1230-18 is compact. The core occupies 1.2mm2 of die area. The fully differential architecture makes it insensitive to substrate noise. Thus it is ideal as an mixed mode in a SoC design.

Supply voltage Power dissipation (30 MSPS) Differential nonlinearity Integral nonlinearity Signal to noise ratio Spurious free dynamic range

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.1 Page of 10 October 15th 2002

(At = 25C, VDD = 1.8V, Sampling Rate = 30MHz, Input frequency = 10MHz, Differential input signal, 50% duty cycle clock and 300nF Reference decoupling unless otherwise noted)

DC Accuracy Differential Nonlinearity fIN = 0.9991 MHz Integral Nonlinearity fIN = 0.9991 MHz Midscale offset Common Mode Rejection Ratio Gain Error Dynamic Performance Signal to Noise Ratio (without harmonics) fIN = 10 MHz fIN = 40 MHz 1) fIN = 72 MHz 1) Signal to Noise and Distortion Ratio fIN = 10 MHz Spurious Free Dynamic Range fIN = 10 MHz fIN = 40 MHz fIN = 72 MHz Analog Input Voltage Range (differential) Analog input common mode voltage Input Capacitance (from each input to ground) Input signal attenuation @ 70MHz Reference Voltages Internal reference voltage on pin 10 Internal reference voltage on pin 11 Internal reference voltage drift Negative Input Voltage (external ref) Positive Input Voltage (external ref) Reference input voltage range 2) Common mode voltage output Switching Performance Maximum Conversion Rate Minimum Conversion Rate Pipeline Delay Aperture delay, IP Output hold time, 0.8 pF load) Output delay time, 0.8 pF load) Aperture delay, with bonding pad Output hold time, with bonding pad Output delay time, with bonding pad

Logic "0" voltage Logic "1" voltage Logic "0" current (VI=VSS) Logic "1" current (VI=VDD) Input Capacitance 0.4 AVDD

(table continued on next page) 1) Requires 1ps clock source jitter, and 1.5ps total on-chip jitter.

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.1 Page of 10 October 15th 2002

Digital Outputs Logic "0" voltage = 2 mA) Logic "1" voltage = 2 mA) Power Supply voltage Supply current (except digital output) Supply voltage Power dissipation (except digital output) (active 10 MSPS) Power dissipation (except digital output) (active 30 MSPS) Power dissipation (except digital output) Power Down Mode Power dissipation (except digital output) Sleep Mode Power dissipation (except digital output) Standby Mode Start-up time from Power down Start-up time from Sleep mode Start-up time from Stand By Output driver supply voltage Junction operating temperature

Test Level I: 100% production tested at +25C Test Level II: 100% production tested at +25C and sample tested at specified temperatures Test Level III: Sample tested only Test Level IV: Parameter is guaranteed by design and characterization testing Test Level V: Parameter is typical value only Test Level VI: 100% production tested at +25C. Guaranteed by design and characterization testing for industrial temperature range

Supply voltages VDD............................... to +2.2V OVDD.............................. to 3.6V Temperatures Operating to +125C Storage Temperature.. to +125C

Analog In............ 0.2V to VDD + 0.2V Digital In........................ to 3.6V REFP.................... 0.2V to VDD + 0.2V REFN................... 0.2V to VDD + 0.2V CLOCK.......................... to 3.6V Note: Stress above one or more of the limiting values may cause permanent damage to the device.

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.1 Page of 10 October 15th 2002


 

Some Part number from the same manufacture Nordic VLSI
nAD1230-18T Analog to Digital Converter ip
nAD1230-18TS
nAD1230-25
nAD1240-18T
nAD1240-18TS
nAD1240-25
nAD1250-18T
nAD1250-25
nAD1260-18T
nAD1260-25
nAD1270-18T
NAD1280-18
nAD1280-18T
nAD1280-18TS
NAD1280-25 12-bit 80msps Sampling Analog-to-digital Converter
NAD2167 12-bit 20 MSPS Sampling Analog-to-digital Converter
NAD8200 8-bit 200 MSPS Analog-to- Digital Converter
nDA1005-18 General Purpose Digital to Analog Converter
nDA10200-18 Digital to Analog Converter ip
nDA10200x2-18a Dual Digital to Analog Converter ip
nDA10400-13 Digital to Analog Converter ip
Same catergory

AD7266 : Differential Input, Dual 2 Msps, 12-Bit, 3-Channel Sar ADC.the AD7266 is a Dual 12-bit High Speed, Low Power, Successive Approximation ADC. The Part Operates From a Single 2.7 V to 5.25 V Power Supply And Throughput Rates up to 2 Msps. The Device Contains Two ADCs, Each Preceded BY a 3-channel Multiplexer And a Low Noise, Wide Bandwidth Track-and-hold.

AD7534AQ : Lc2mos Up-compatible 14-bit DAC.

AD7537TQ : Lc2mos ( 8+4 ) Loading Dual 12-bit DAC. Two 12-Bit DACs in One Package DAC Ladder Resistance Matching: 0.5% Space Saving Skinny DIP and Surface Mount Packages 4-Quadrant Multiplication Low Gain Error (1 LSB max Over Temperature) Byte Loading Structure Fast Interface Timing APPLICATIONS Automatic Test Equipment Programmable Filters Audio Applications Synchro Applications Process Control The AD7537.

ADS-935 : 16-bit, 5mhz Sampling A/D Converters. 16-bit resolution 5MHz sampling rate Functionally complete No missing codes over full military temperature range Edge-triggered or 15V supplies, 3.0 Watts Small, 40-pin, ceramic TDIP 83dB SNR, 86dB THD Ideal for both time and frequency-domain applications FUNCTION +3.2V REF. OUT UNIPOLAR ANALOG INPUT ANALOG GROUND OFFSET ADJUST GAIN ADJUST DIGITAL.

ADS1100A0IDBVR : ti ADS1100, Self-Calibrating, 16-Bit Analog-to-digital Converter. q COMPLETE DATA ACQUISITION SYSTEM IN A TINY SOT23-6 PACKAGE 16-BITS NO MISSING CODES q INL: 0.0125% of FSR MAX q CONTINUOUS SELF-CALIBRATION q SINGLE-CYCLE CONVERSION q PROGRAMMABLE GAIN AMPLIFIER GAIN 8 q LOW NOISE: 4Vp-p q PROGRAMMABLE DATA RATE: 128SPS q INTERNAL SYSTEM CLOCK q I2CTM INTERFACE q POWER SUPPLY: 5.5V q LOW CURRENT CONSUMPTION: 90A.

AK5385A : 114dB 192kHz 24-Bit Enhanced Dual Bit ADC.

DAC7541A : Low Cost 12-bit CMOS Four-quadrant Multiplying Digital-to-analog Converter.

DAC7643VFBR : ti DAC7643, 16-Bit, Dual Voltage Output DAC With Parallel Interface And Reset to Min-scale.

M62364FP : 8-bit 8ch A-d Converter. The is a CMOS 8-bit, 8-ch D/A converter having a multiplying function and output buffer amplifiers. It has a serial data input and can easily communicate with a microcontroller by the simple three-wiring method (DI, CLK, LD). The output buffer amplifiers operating in AB-class has both sinking and driving capabilities 1.0mA or more and can operate in a whole.

MAX1233 : MAX1233, MAX1234 ±15kV Esd-protected Touch-screen Controllers Include DAC And Keypad Controller.

MAX146 : +2.7V, Low-Power, 8-Channel, Serial 12-Bit ADCs. o 8-Channel Single-Ended or 4-Channel Differential Inputs o Single-Supply Operation (MAX147) o Internal 2.5V Reference (MAX146) o Low Power (133ksps, 3V supply) (1ksps, 3V supply) 1A (power-down mode) SPI/QSPI/MICROWIRE/TMS320-Compatible 4-Wire Serial Interface o Software-Configurable Unipolar or Bipolar Inputs o 20-Pin DIP/SSOP Packages The MAX146/MAX147.

SL34063A : Dc-to-dc Converter Control Circuits. The is a monolithic control circuit containing the primary functions required for DC-to-DC converters. These devices consist of an internal temperature compensated reference, comparator, controlled duty cycle oscillator with an active current limit circuit, driver and high current output switch. This series was specifically designed to be incorporated.

TL5632 : 8-bit, 3-channel High-speed DAC. The is a low-power ultra-high-speed video digital-to-analog converter that uses the Advanced Low-Power Schottky (ALS) process. The device has a three channel I/O; the red, the blue, and the green channel. The red, blue, and green signals are referred to collectively as the RGB signal. An internally generated reference is also provided for the standard.

TLC0831CD : ti TLC0831, 8-Bit, 31 KSPS ADC Serial Out, Microprocessor Peripheral/Standalone, Single Channels.

TLV5617A : 2.7-v to 5.5-v Low-power Dual 10-bit Digital-to-analog Converter With Power Down.

MCP4725 : 12-Bit Digital-to-Analog Converter With EEPROM Memory In SOT-23-6 The MCP4725 is a low-power, high accuracy, single channel, buffered voltage output 12-bit Digital-to-Analog Convertor (DAC) with non-volatile memory (EEPROM). Its on-board precision output amplifier allows it to achieve rail-to-rail analog output.

ADC0804S030 : Single 8 Bits ADC, Up To 30 MHz, 40 MHz Or 50 MHz he ADC0806030/040/050 are a family of 8-bit high-speed, low-power Analog-to-Digital Converters (ADC) for professional video and other applications. It converts the analog input signal into 8-bit binary coded digital signals at a maximum sampling rate of 50 MHz. All digital inputs and outputs are Transistor-Transistor.

HMCAD1101 : Octal 13/12-Bit 65 MSPS A/D Converter HMCAD1101 is a high performance low power octal analog-to-digital converter (ADC). The ADC is based on a proprietary structure and employs internal reference circuitry, a serial control interface and serial LVDS output data. Data and frame synchronization output clocks are supplied for data capture at the receiver..

AD9645 : Dual, 14-Bit, 80 MSPS/125 MSPS Serial LVDS 1.8 V Analog-to-Digital Converter The AD9645 is a dual, 14-bit, 80 MSPS/125 MSPS analog-to- digital converter (ADC) with an on-chip sample-and-hold circuit designed for low cost, low power, small size, and ease of use. The product operates at a conversion rate of up to 125 MSPS and is optimized for outstanding.

 
0-C     D-L     M-R     S-Z