Details, datasheet, quote on part number: nAD1230-18T
PartnAD1230-18T
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit => 12 bit
DescriptionAnalog to Digital Converter ip
CompanyNordic VLSI
DatasheetDownload nAD1230-18T datasheet
  

 

Features, Applications

FEATURES

3.3V power supply SINAD min 63.2dB for fin = 50MHz Low power @ 3.3V and 30MSPS) Frequency dependent biasing Internal, wideband Track/Hold Differential input Low input capacitance Power Down and Sleep Mode

APPLICATIONS

Imaging Test equipment Computer scanners Wireless communication Powerline communication Set top boxes Video products

The is a compact, high-speed, low power 12-bit monolithic analog-todigital converter, implemented a 0.18m single poly CMOS process with MiM capacitors and thick oxide transistor option. It has 12-bit resolution with 11 effective bits at low input frequencies, and close to 12 bit dynamic range for video frequency signals. The converter includes a high bandwidth track and hold. Using internal references, the full scale range is 1V. The full scale range can be set between 0.75V and 1.0V using external references. It operates from a single 3.3V supply, while I/O is biased with 1.8V. Its low distortion and high dynamic range offers the performance needed for demanding imaging, multimedia, telecommunications and instrumentation applications. The bias current level for the ADC is automatically adjusted based on the clock input frequency. Hence, the power dissipation of the device is continuously minimised for the current operation frequency.

Supply voltage Supply current (30 MSPS) Power dissipation (15 MSPS) Power dissipation (30 MSPS) Differential nonlinearity Integral nonlinearity Conversion rate Resolution

Except digital output drivers Except digital output drivers fIN=0.9991MHz

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.3 Page of 11 September , 2001

The nAD1230-18T has a pipelined architecture - resulting in low input capacitance. Digital error correction of the 11 most significant bits ensures good linearity for input frequencies approaching Nyquist. The nAD1230-18T is compact. The core occupies less than 4mm2 of die area in the TSMC MiM 0.18m CMOS process with thick oxide option. The fully differential architecture makes it insensitive to substrate noise. Thus it is ideal as a mixed signal ASIC macro cell.

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.3 Page of 11 September , 2001

(At = 25C, VDD = 3.3V, Sampling Rate = 30MHz, Input frequency = 15MHz, Differential input signal, 50% duty cycle clock unless otherwise noted )

DC Accuracy Differential Nonlinearity fIN = 0.9991 MHz Integral Nonlinearity fIN = 0.9991 MHz Midscale offset Common Mode Rejection Ratio Gain Error Dynamic Performance Signal to Noise Ratio (without harmonics) fIN = 10 MHz fIN = 50 MHz Signal to Noise and Distortion Ratio fIN = 10 MHz fIN = 50 MHz Spurious Free Dynamic Range fIN = 10 MHz fIN = 50 MHz Analog Input Voltage Range (differential) Common mode input voltage Input Capacitance (from each input to ground) Reference Voltages Internal reference voltage drift Negative Input Voltage Positive Input Voltage Reference input voltage range 1) Common mode output voltage Switching Performance Conversion Rate Pipeline Delay Aperture delay, IP Output hold time, IP Output delay time, IP Aperture delay, with bonding pad Output hold time, with bonding pad Output delay time, with bonding pad

Logic "0" voltage Logic "1" voltage Logic "0" current (VI=VSS) Logic "1" current (VI=VDD) Input Capacitance A pF

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.3 Page of 11 September , 2001


 

Some Part number from the same manufacture Nordic VLSI
nAD1230-18TS Analog to Digital Converter ip
nAD1230-25
nAD1240-18T
nAD1240-18TS
nAD1240-25
nAD1250-18T
nAD1250-25
nAD1260-18T
nAD1260-25
nAD1270-18T
NAD1280-18
nAD1280-18T
nAD1280-18TS
NAD1280-25 12-bit 80msps Sampling Analog-to-digital Converter
NAD2167 12-bit 20 MSPS Sampling Analog-to-digital Converter
NAD8200 8-bit 200 MSPS Analog-to- Digital Converter
nDA1005-18 General Purpose Digital to Analog Converter
nDA10200-18 Digital to Analog Converter ip
nDA10200x2-18a Dual Digital to Analog Converter ip
nDA10400-13 Digital to Analog Converter ip
nDA10400x2-13a Dual Digital to Analog Converter ip
Same catergory

AD669 : Monolithic 16-Bit DACport. Complete 16-Bit D/A Function On-Chip Output Amplifier High Stability Buried Zener Reference Monolithic BiMOS II Construction 1 LSB Integral Linearity Error 15-Bit Monotonic over Temperature Microprocessor Compatible 16-Bit Parallel Input Double-Buffered Latches Fast 40 ns Write Pulse Unipolar or Bipolar Output Low Glitch: 15 nV-s Low THD+N: 0.009% MIL-STD-883.

AD75089 : Monolithic Octal 12-Bit DACport.

AD9054A : 8-Bit, 200 MSPS/135 MSPS A/D Converter. 200 MSPS Guaranteed Conversion Rate 135 MSPS Low Cost Version Available 350 MHz Analog Bandwidth 1 V p-p Analog Input Range Internal 2.5 V Reference and T/H Low Power: 5 V Single Supply Operation TTL Output Interface Single or Demultiplexed Output Ports APPLICATIONS RGB Graphics Processing High Resolution Video Digital Data Storage Read Channels Digital.

AD9772A : 14-Bit, 160 MSPS TxDAC+ With 2x Interpolation Filter. Single 3.6 V Supply 14-Bit DAC Resolution and Input Data Width 160 MSPS Input Data Rate 67.5 MHz Reconstruction Passband @ 160 MSPS 74 dBc SFDR @ 25 MHz 2 Interpolation Filter with High- or Low-Pass Response 73 dB Image Rejection with 0.005 dB Passband Ripple "Zero-Stuffing" Option for Enhanced Direct IF Performance Internal 2/4 Clock Multiplier 250 mW Power.

ADS7809 : . q 100kHz SAMPLING RATE q 86dB SINAD WITH 20kHz INPUT q 2LSB INL q DNL: 16 Bits "No Missing Codes" q SIX SPECIFIED INPUT RANGES q SERIAL OUTPUT q SINGLE +5V SUPPLY OPERATION q PIN-COMPATIBLE WITH ADS7808 q USES INTERNAL OR EXTERNAL REFERENCE q 100mW MAX POWER DISSIPATION 20-PIN 0.3" PLASTIC DIP AND SO q SIMPLE DSP INTERFACE The is a complete 16-bit.

ADS802 : . NO MISSING CODES LOW POWER: 250mW INTERNAL REFERENCE WIDEBAND TRACK-AND-HOLD: 65MHz SINGLE +5V SUPPLY The is a low-power, monolithic 12-bit, 10MHz Analog-to-Digital (A/D) converter utilizing a small geometry CMOS process. This complete converter includes a 12-bit quantizer, wideband track-and-hold, reference and three-state outputs. It operates from.

LC89080Q : Video Signal 3-channel 8-bit D/A Converter. The LC89080 and LC89080Q are high-speed currentoutput D/A converters. They feature 8-bit resolution, provide 3 channels on a single chip, and can be used in demodulators for high-speed signals such as video signals. Resolution: 8 bits D/A converters: Three current-output D/A converter channels on a single chip Maximum conversion speed: 30 MSPS Error:.

LTC1590C : Dual Serial 12-bit Multiplying DAC. The is a dual, serial input 12-bit multiplying digital-to-analog converter (DAC). It includes two current output multiplying CMOS DACs and an easy SPI compatible serial interface with daisy-chain output. An asynchronous CLR pin sets both DACs to zero scale. Excellent accuracy, stability and versatility are combined with the smallest package available.

MAX1291 : 250ksps, +3V, 8/4-Channel, 12-Bit ADCs With +2.5V Reference And Parallel Interface.

TLV1508IDW : ti TLV1508, 10-Bit 200 KSPS ADC Serial Out, Hardware/software/auto Powerdown, Pgrmable Auto Channel Sweep, 8 Ch..

ADE7757A : Single Phase Energy Metering IC with Integrated Oscillator and Reverse Power Indication The ADE7757A is an accurate electrical energy measurement integrated circuit. It is a pin reduction version of ADE7755 with an enhancement of a precise oscillator circuit that serves as a clock source to the chip. The ADE7757A eliminates the cost of an external crystal.

ADS1174 : Quad, Simultaneous Sampling, 16-Bit Analog-to-Digitalconverter The ADS1174 (quad) and ADS1178 (octal) are multiple delta-sigma () analog-to-digital converters (ADCs) with data rates up to 52k samples-per-second (SPS), which allow synchronous sampling of four and eight channels. These devices use identical packages, and are also compatible with the high-performance.

MAX15500 : Industrial Analog Current/Voltage Output Conditioners The MAX15500/MAX15501 analog output conditioners provide a programmable current up to 24mA, or a voltage up to 12V proportional to a control voltage signal. The control voltage is typically supplied by an external DAC with an output voltage range of 0 to 4.096V for the MAX15500 and 0 to 2.5V for the MAX15501.

MAX1274 : 1.8Msps, Single-Supply, Low-Power, True-Differential, 12-Bit ADCs The MAX1274/MAX1275 low-power, high-speed, serial-output, 12-bit, analog-to-digital converters (ADCs) operate at up to 1.8Msps. These devices feature true-differential inputs, offering better noise immunity, distortion improvements, and a wider dynamic range over single-ended inputs.

DAC7728 : Octal Low Power 12-bit +/-15V Output Serial Input Digital-to-Analog Converter The DAC7728 is a low-power, octal, 12-bit digital-to-analog converter (DAC). With a 5V reference, the output can either be a bipolar 15V voltage when operating from a dual 15.5V (or higher) power supply, or a unipolar 0V to +30V voltage when operating from a +30.5V power.

 
0-C     D-L     M-R     S-Z