Details, datasheet, quote on part number: nAD1230-18TS
PartnAD1230-18TS
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit => 12 bit
DescriptionAnalog to Digital Converter ip
CompanyNordic VLSI
DatasheetDownload nAD1230-18TS datasheet
  

 

Features, Applications

FEATURES

3.3V power supply 150V input referred noise Low power @ 3.3V and 30MSPS) Compact area (2.47mm2) Frequency dependent biasing Single ended input 1X-2X gain input stage Low input capacitance Two power saving idle modes TSMC Imaging process: 4 metal layers

The is a compact, high-speed, low power 12-bit monolithic analogto-digital converter, implemented in the TSMC imaging 0.18m CMOS process with MiM capacitor and thick oxide options, and 4 metal layers. The converter includes a single ended to differential low-noise input stage, with or 2X gain, making it ideal for imaging applications. Using internal references, the full scale range in 2X mode and in 1X mode. The full scale range can be reduced by using external references. It operates from a single 3.3V supply. The bias current level for the ADC is automatically adjusted based on the clock input frequency. Hence, the power dissipation of the device is continuously minimised for the current operation frequency. The nAD1230-18TS has a pipelined architecture - resulting in low input capacitance. Digital error correction of the 11 most significant bits ensures good linearity for input frequencies approaching Nyquist. The nAD1230-18TS is compact. The core occupies less than 2.5mm2 of die. The differential architecture makes it insensitive to substrate noise. Thus it is ideal as a mixed signal ASIC macro cell.

Supply voltage Power dissipation Differential nonlinearity Integral nonlinearity Input referred noise Input referred noise

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.0 Page of 7 May 7th 2002

ELECTRICAL SPECIFICATIONS (At = 25C, VDD = 3.3V, Sampling Rate = 30MHz, Input frequency = 10MHz, Differential input signal, 50% duty cycle clock and 300nF Reference decoupling unless otherwise noted)

DNL INL VOS G Vnrms VFSR CINA DC Accuracy Differential Nonlinearity fIN = 0.9991 MHz Differential Nonlinearity fIN = 0.9991 MHz Midscale offset Gain Error Dynamic Performance Input referred noise (1X-mode) Input referred noise (2X mode) Analog Input Voltage Range (1X-mode) Input Voltage Range (2X-mode) Input Capacitance (1X-mode) Input Capacitance (1X-mode) Input signal attenuation Reference Voltages Internal reference voltage on ref[0] Internal reference voltage on ref[1] Internal reference voltage drift Negative Input Voltage (external ref) Positive Input Voltage (external ref) Reference input voltage range Switching Performance Maximum Conversion Rate Minimum Conversion Rate Pipeline Delay Aperture delay, IP Output hold time, IP (max 0.2 pF load) Output delay time, IP (max 0.2 pF load)

Logic "0" voltage Logic "1" voltage Logic "0" current (VI=VSS) Logic "1" current (VI=VDD) Input Capacitance Digital Outputs Logic "0" voltage = 2 mA) Logic "1" voltage = 2 mA) Power Supply voltage Supply current (except digital output) Supply voltage Power dissipation active 15 MSPS Power dissipation active 30 MSPS Power dissipation Power Down Mode Power dissipation Standby Mode Start-up time from Power down Start-up time from Stand By Junction operating temperature 10 0.1

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.0 Page of 7 May 7th 2002

OR_FLAG CLK REF_SEL PDBUS(2:0) BSC(1:0) VDD_DIG REF(1:0) AVSS AVDD IN_REF IN

Overflow-flag Clock Disabling internal references Powerdown control Bias current control Digital power Reference voltages Common ground Analog ground Negative input Input signal

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.0 Page of 7 May 7th 2002


 

Some Part number from the same manufacture Nordic VLSI
nAD1230-25 Analog to Digital Converter ip
nAD1240-18T
nAD1240-18TS
nAD1240-25
nAD1250-18T
nAD1250-25
nAD1260-18T
nAD1260-25
nAD1270-18T
NAD1280-18
nAD1280-18T
nAD1280-18TS
NAD1280-25 12-bit 80msps Sampling Analog-to-digital Converter
NAD2167 12-bit 20 MSPS Sampling Analog-to-digital Converter
NAD8200 8-bit 200 MSPS Analog-to- Digital Converter
nDA1005-18 General Purpose Digital to Analog Converter
nDA10200-18 Digital to Analog Converter ip
nDA10200x2-18a Dual Digital to Analog Converter ip
nDA10400-13 Digital to Analog Converter ip
nDA10400x2-13a Dual Digital to Analog Converter ip
NDA2496 Stereo 24-bit, 96khz Sampling Digital-to-analog Converter For Audio
Same catergory

AD5332 : +2.5V to 5.5V, 230µA Dual Rail-to-rail Voltage Output 8-Bit DAC With Parallel Interface in 20-lead Tssop.

AD753JP : CMOS Low Cost 10-bit Multiplying DAC.

AD9002 : High Speed 8-Bit Monolithic A/D Converter. 150 MSPS Encode Rate Low Input Capacitance: 17 pF Low Power: 5.2 V Single Supply MIL-STD-883 Compliant Versions Available APPLICATIONS Radar Systems Digital Oscilloscopes/ATE Equipment Laser/Radar Warning Receivers Digital Radio Electronic Warfare (ECM, ECCM, ESM) Communication/Signal Intelligence The an 8-bit, high-speed, analog-to-digital converter.

AD9235 : 12-Bit, 65 MSPS , 3 V Analog-to-digital Converter. Single 3 V Supply Operation 3.6 V) SNR = 70 dBc (to Nyquist) SFDR = 90 dBc (to Nyquist) Low Power: at 65 MSPS Differential Input with 500 MHz Bandwidth On-Chip Reference and SHA DNL = 0.4 LSB Flexible Analog Input: 1 V p-p 2 V p-p Range Offset Binary or Two's Complement Data Format Clock Duty Cycle Stabilizer APPLICATIONS Ultrasound Equipment IF Sampling.

ADS-950 : . 18-bit resolution 500kHz minimum sampling rate No missing codes over full military temperature range Very low power, 1.45 Watts Small, 32-pin, side-brazed, ceramic TDIP Edge-triggered Excellent performance Ideal for both time and frequency-domain applications Low cost FUNCTION BIT 2 BIT 1 (MSB) ANALOG GROUND ANALOG INPUT +5V REFERENCE OUT GAIN ADJUST.

ADS5422Y/1K5 : ti ADS5422, 14-Bit, 62MSPS Sampling ADC. q HIGH DYNAMIC RANGE: High SFDR: at 10MHz fIN High SNR: at 10MHz fIN q PREMIUM TRACK-AND-HOLD: Differential Inputs Selectable Full-Scale Input Range q FLEXIBLE CLOCKING: Differential or Single-Ended Accepts Sine or Square Wave Clocking Down to 0.5Vp-p Variable Threshold Level The is a high-dynamic range, 14-bit, 62MSPS, pipelined Analog-to-Digital Converter.

ADS8324 : . 14-Bit, High Speed, 1.8V MicroPower Sampling ANALOG-TO-DIGITAL CONVERTER BIPOLAR INPUT RANGE 1.8V OPERATION 50kHz SAMPLING RATE MICRO POWER: 1.8V q POWER DOWN: 3A max q MSOP-8 PACKAGE q PIN-COMPATIBLE ADS7817 q SERIAL (SPI/SSI) INTERFACE The a 14-bit, sampling Analog-to-Digital (A/D) converter with tested s using a 1.8V supply voltage. It requires.

ADS8402 : 16 Bit 1.25MSPS Parallel ADC W/Ref, Pseudo Bipolar Fully Differential Input.

DAC7802 : . Dual Monolithic CMOS 12-Bit Multiplying DIGITAL-TO-ANALOG CONVERTERS q TWO DACs A 0.3" WIDE PACKAGE q SINGLE +5V SUPPLY q HIGH SPEED DIGITAL INTERFACE: Parallel--DAC7802 q MONOTONIC OVER TEMPERATURE q LOW CROSSTALK: 94dB min q FULLY SPECIFIED OVER TO +85OC APPLICATIONS PROCESS CONTROL OUTPUTS ATE PIN ELECTRONICS LEVEL SETTING PROGRAMMABLE FILTERS PROGRAMMABLE.

HI20201 : 10-Bit, 160 Msps, Ultra High Speed D/A Converter. The a 160MHz ultra high speed D/A converter. The converter is based an R/2R switched current source architecture that includes an input data register with a complement feature and is Emitter Coupled Logic (ECL) compatible. The HI20201 is available in a commercial temperature range and offered a 28 lead plastic SOIC (300 mil) and a 28 lead plastic DIP package.

HI3026A : 8-Bit, 140 Msps, Flash A/D Converter. Differential Linearity Error. 0.5 LSB Integral Linearity Error. 0.5 LSB Integral Linearity Compensation Circuit Low Input Capacitance. 21pF Wide Analog Input Bandwidth. 150MHz Low Power Consumption. 790mW Internal 1/2 Frequency Divider Circuit (With Reset Function) CLK/2 Clock Output Pin Compatible with ECL, PECL and TTL Digital Input Levels 1:2 Demultiplexed.

MAX1005 : if Undersampler. The is a combined digitizer and reconstruction integrated circuit designed to work in systems that demodulate and modulate communications signals. It integrates IF undersampling and signal synthesis functions into a single, low-power circuit. Its analog-todigital converter (ADC) is used to directly sample or undersample a downconverted RF signal, while.

MAX7624C/D : CMOS 8-bit Buffered Multiplying DACs. For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. .

MB40C568 : A/D Converter ( 1-channel, 8-bit, 20mhz ). The is a high-speed A/D converter using high-speed CMOS process technology. Resolution: 8 bits Linearity error: 0.20% (Typ.) Maximum conversion rate: 20 MSPS (Min.) Power supply voltage: Analog section +5.0 V Digital section +5.0 V Digital input voltage range: TTL level Digital output voltage range: CMOS level compatible Analog input voltage range:.

PCM1741 : . +3.3V Single-Supply, 24-Bit, 96kHz Sampling Enhanced Multilevel, Delta-Sigma, Audio DIGITAL-TO-ANALOG CONVERTER q 24-BIT RESOLUTION q ANALOG PERFORMANCE (VCC = +3.3V): Dynamic Range: 98dB typ SNR: 98dB typ THD+N: 0.005% typ Full-Scale Output: 2.05Vp-p typ q 8x OVERSAMPLING DIGITAL FILTER: Stopband Attenuation: 55dB Passband Ripple: 0.03dB q SAMPLING.

THS1031 : 2.7 V to 5.5 v, 10-bit, 30 MSPS CMOS Analog-to-digital Converter. 10-Bit Resolution, 30 MSPS Analog-to-Digital Converter Configurable Input Functions: Single-Ended Single-Ended With Analog Clamp Single-Ended With Programmable Digital Clamp Differential Built-In Programmable Gain Amplifier (PGA) Differential Nonlinearity: 0.3 LSB Signal-to-Noise: 56 dB Spurious Free Dynamic Range: 60 dB Adjustable Internal.

TLV5613DW : 2.7 V to 5.5 V 12-bit Parallel Digital-to-analog Converter With Power Down.

ADS1198 : Low-Noise, 8 Channel, 16 Bit Analog Front End For ECG/EEG Measurements The ADS1194/6/8 are a family of multichannel, simultaneous sampling, 16-bit, delta-sigma () analog-to-digital converters (ADCs) with a built-in programmable gain amplifier (PGA), internal reference, and an onboard oscillator. The ADS1194/6/8 incorporate all of the that are commonly.

DS3911 : Temperature-Controlled, Nonvolatile, IC Quad DAC The DS3911 is a quad, 10-bit delta-sigma output, nonvolatile (NV) controller that an on-chip temperature sensor and associated analog-to-digital converter (ADC). The integrated temperature sensor indexes the up to 2C resolution NV lookup tables (LUTs), encompassing a -40C to +100C temperature range.

 
0-C     D-L     M-R     S-Z