Details, datasheet, quote on part number: nAD1240-18T
PartnAD1240-18T
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit => 12 bit
DescriptionAnalog to Digital Converter ip
CompanyNordic VLSI
DatasheetDownload nAD1240-18T datasheet
  

 

Features, Applications

FEATURES

3.3V power supply SINAD min 63.2dB for fin = 50MHz Low power @ 3.3V and 40MSPS) Frequency dependent biasing Internal, wideband Track/Hold Differential input Low input capacitance Power Down and Sleep Mode

APPLICATIONS

Imaging Test equipment Computer scanners Wireless communication Powerline communication Set top boxes Video products

The is a compact, high-speed, low power 12-bit monolithic analog-todigital converter, implemented a 0.18µm single poly CMOS process with MiM capacitors and thick oxide transistor option. It has 12-bit resolution with 11 effective bits at low input frequencies, and close to 12 bit dynamic range for video frequency signals. The converter includes a high bandwidth track and hold. Using internal references, the full scale range is ±1V. The full scale range can be set between ±0.75V and ±1.0V using external references. It operates from a single 3.3V supply, while I/O is biased with 1.8V. Its low distortion and high dynamic range offers the performance needed for demanding imaging, multimedia, telecommunications and instrumentation applications. The bias current level for the ADC is automatically adjusted based on the clock input frequency. Hence, the power dissipation of the device is continuously minimised for the current operation frequency.

Supply voltage Supply current (40 MSPS) Power dissipation (15 MSPS) Power dissipation (40 MSPS) Differential nonlinearity Integral nonlinearity Conversion rate Resolution

Except digital output drivers Except digital output drivers fIN=0.9991MHz

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.3 Page of 11 September , 2001

The nAD1240-18T has a pipelined architecture - resulting in low input capacitance. Digital error correction of the 11 most significant bits ensures good linearity for input frequencies approaching Nyquist. The nAD1240-18T is compact. The core occupies less than 4mm2 of die area in the TSMC MiM 0.18µm CMOS process with thick oxide option. The fully differential architecture makes it insensitive to substrate noise. Thus it is ideal as a mixed signal ASIC macro cell.

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.3 Page of 11 September , 2001

(At = 25°C, VDD = 3.3V, Sampling Rate = 40MHz, Input frequency = 15MHz, Differential input signal, 50% duty cycle clock unless otherwise noted )

DC Accuracy Differential Nonlinearity fIN = 0.9991 MHz Integral Nonlinearity fIN = 0.9991 MHz Midscale offset Common Mode Rejection Ratio Gain Error Dynamic Performance Signal to Noise Ratio (without harmonics) fIN = 10 MHz fIN = 50 MHz Signal to Noise and Distortion Ratio fIN = 10 MHz fIN = 50 MHz Spurious Free Dynamic Range fIN = 10 MHz fIN = 50 MHz Analog Input Voltage Range (differential) Common mode input voltage Input Capacitance (from each input to ground) Reference Voltages Internal reference voltage drift Negative Input Voltage Positive Input Voltage Reference input voltage range 1) Common mode output voltage Switching Performance Conversion Rate Pipeline Delay Aperture delay, IP Output hold time, IP Output delay time, IP Aperture delay, with bonding pad Output hold time, with bonding pad Output delay time, with bonding pad

Logic "0" voltage Logic "1" voltage Logic "0" current (VI=VSS) Logic "1" current (VI=VDD) Input Capacitance µA pF

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 1.3 Page of 11 September , 2001


 

Some Part number from the same manufacture Nordic VLSI
nAD1240-18TS Analog to Digital Converter ip
nAD1240-25
nAD1250-18T
nAD1250-25
nAD1260-18T
nAD1260-25
nAD1270-18T
NAD1280-18
nAD1280-18T
nAD1280-18TS
NAD1280-25 12-bit 80msps Sampling Analog-to-digital Converter
NAD2167 12-bit 20 MSPS Sampling Analog-to-digital Converter
NAD8200 8-bit 200 MSPS Analog-to- Digital Converter
nDA1005-18 General Purpose Digital to Analog Converter
nDA10200-18 Digital to Analog Converter ip
nDA10200x2-18a Dual Digital to Analog Converter ip
nDA10400-13 Digital to Analog Converter ip
nDA10400x2-13a Dual Digital to Analog Converter ip
NDA2496 Stereo 24-bit, 96khz Sampling Digital-to-analog Converter For Audio
nRF0433 Single Chip 433MHz RF Transceiver
NRF0433 Single Chip 433mhz RF Transceiver
Same catergory

AD7722 : CMOS, 16-Bit, 195 KSPS Sigma-delta ADC. 16-Bit Sigma-Delta ADC 64 Oversampling Ratio to 220 kSPS Output Word Rate Low-Pass, Linear Phase Digital Filter Inherently Monotonic On-Chip 2.5 V Voltage Reference Single Supply +5 V High Speed Parallel or Serial Interface P/S CAL RESET SYNC CS DVAL/RD CFMT/DRDY DB1 DB2 CONTROL LOGIC The is a complete low power, 16-bit, sigma-delta ADC. The part operates.

LTC1595 : Current Output. LTC1595, 1LSB INL/DNL, Serial 16-Bit Multiplying DACs, SO-8.

LTC2602 : Rail-to-rail DACs in 8-Lead MSOP2.5V-to-5.5V Rail-to-rail Voltage-output DACs, in a Tiny 8-lead Msop Package. They Have Built-in High Performance Output Buffers And Are Guaranteed Monotonic. smallest Pin-compatible Dual DACs:guaranteed 16-Bit Monotonic Over Temperature Wide 2.5V to 5.5V Supply Range Low Power Operation: 300µA Per DAC at 3V Individual.

MAX1419 : 15-Bit, 65Msps ADC With -78.2dBFS Noise Floor For if Applications The MAX1418 is a 5V, High-speed, High-performance Analog-to-digital Converter (ADC) Featuring a Fully Differential Wideband Track-and-hold (T/H) And a 15-bit Converter Core. The MAX1418 is Optimized For Multichannel, Multimode Receivers, Which Require The ADC to Meet Very Stringent Dynamic.

MAX1420 : 12-Bit, 60Msps, +3.3V, Low-power ADC With Internal Reference. The +3.3V, 12-bit analog-to-digital converter (ADC) a fully-differential input, pipelined, 12stage ADC architecture with wideband track-and-hold (T/H) and digital error correction, incorporating a fullydifferential signal path. The MAX1420 is optimized for low-power, high dynamic performance applications in imaging and digital communications. The converter.

MAX5821 : Dual, 10-Bit, Low-Power, 2-Wire, Serial Voltage-output DAC. The is a dual, 10-bit voltage-output, digital-toanalog converter (DAC) with C TM -compatible, 2-wire interface that operates at clock rates to 400kHz. The device operates from a single to 5.5V supply 3.6V. A power-down mode decreases current consumption to less than 1µA. The MAX5821 three software-selectable powerdown output impedances: 1k , and high.

MAX5883 : High-Speed Data Converters. MAX5883 3.3V, 12-Bit, 200Msps High Dynamic Performance DAC With CMOS Inputs.

nAD1250-18T : Analog to Digital Converter ip. 3.3V power supply SINAD min 63.2dB for fin = 50MHz Low power @ 3.3V and 50MSPS) Frequency dependent biasing Internal, wideband Track/Hold Differential input Low input capacitance Power Down and Sleep Mode APPLICATIONS Imaging Test equipment Computer scanners Wireless communication Powerline communication Set top boxes Video products The is a compact,.

NJU9202B : Display Output ADC. 3.1/2 Digit Single Chip A/D Converter.

PCM1792D : 24-Bit 192 KHZ Sampling Advanced Segment Audio Stereo Digital to Analog Convert The PCM1792 is a Monolithic CMOS Integrated Circuit That Includes Stereo Digital-to-analog Converters And Support Circuitry in a Small 28-lead Ssop Package. The Data Converters Use ti S Advanced Segment DAC Architecture to Achieve Excellent Dynamic Performance And Improved.

TDA8754 : TDA8754; Triple 8-bit Video ADC up to 270 Msps;; Package: SOT486-1 (LQFP144).

TLV5510 : 2.7v to 3.6v 8-bit High-speed Analog-to-digital Converter. 8-Bit Resolution Integral Linearity Error ± 0.75 LSB Max ± 1 LSB Max to 85°C) Differential Linearity Error ± 0.5 LSB ± 0.75 LSB Max to 85°C) Maximum Conversion Rate 10 Mega-Samples per Second (MSPS) Min to 3.6-V Single-Supply Operation Low Power Consumption. 42 mW Typ at 3V Low Voltage Replacement for CXD1175 DGND REFB REFBS AGND ANALOG IN VDDA REFT.

AD5641 : 2.7 V to 5.5 V, . 6-lead SC70 package Micropower operation: 100 µA max 5 V Power-down to typically 3 V Single 14-bit DAC A Version: ±16 LSB INL 5.5 V power supply Guaranteed monotonic by design Power-on reset 0 V with brownout detection 3 power-down functions Low power serial interface with Schmitt-triggered inputs On-chip output buffer amplifier, rail-to-rail operation.

ADS1602 : 16-Bit, 2.5MSPS Analog-to-Digital Converter The ADS1602 is a high-speed, high-precision, delta-sigma analog-to-digital converter (ADC) manufactured on an advanced CMOS process. The ADS1602 oversampling topology reduces clock jitter sensitivity during the sampling of high-frequency, large amplitude signals by a factor of four over that achieved by Nyquist-rate.

AD9229 : Quad 12-Bit, 50/65 MSPS, Serial LVDS A/D Converter The AD9229 is a 50 or 65 MSPS quad 12-bit, analog–to–digital converter with serial LVDS outputs. An on–chip track–and–hold circuit is designed for low cost, low power, small size and ease of use. The product operates up to a 65 MSPS conversion rate and is optimized for outstanding dynamic performance.

ADC128S102 : 8-Channel, 500 kSPS to 1 MSPS, 12-Bit A/D Converter The ADC128S102 is a low-power, eight-channel CMOS 12-bit analog-to-digital converter specified for conversion throughput rates of 500 kSPS to 1 MSPS. The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit. It can be configured to accept up to eight.

DAC082S085 : The DAC082S085 is a full-featured, general purpose DUAL 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 210 µA at 3V and 320 µA at 5V. The DAC082S085 is packaged in 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface.

ADS7865 : Dual, 2MSPS, 12-Bit, 3+3 Or 2+2 Channel, Simultaneous Sampling ADC The ADS7865 is a dual, 12-bit, 2MSPS analog-to-digital converter (ADC) with four fully differential or six pseudo-differential input channels grouped into two pairs for high-speed, simultaneous signal acquisition. Inputs to the sample-and-hold (S/H) amplifiers are fully differential.

LTC2470 : Selectable 250sps/1ksps, 16-Bit Delta Sigma ADCs With 10ppm/°C Max Precision Reference The LTC2470/LTC2472 are small, 16-bit analog-to-digital converters with an integrated precision reference and a selectable 250sps or 1ksps output rate. They use a single 2.7V to 5.5V supply and communicate through a SPI Interface. The LTC2470 is single-ended with.

HS-565BEH : High Speed, Monolithic Digital-To-Analog Converter The HS-565BRH, HS-565BEH are fast, radiation hardened 12-bit current output, digital-to-analog converters. This part replaces the HS-565ARH, which is no longer available. The monolithic chips include a precision voltage reference, thin-film R-2R ladder, reference control amplifier and twelve high-speed.

 
0-C     D-L     M-R     S-Z