Details, datasheet, quote on part number: nAD1260-25
PartnAD1260-25
CategoryData Conversion => ADC (Analog to Digital Converters) => 10-14 bit => 12 bit
DescriptionAnalog to Digital Converter ip
CompanyNordic VLSI
DatasheetDownload nAD1260-25 datasheet
  

 

Features, Applications

FEATURES
APPLICATIONS

2.5V power supply SNR typ 66dB for (fin = 10MHz) Low power (150mW@2.5V) Sample rate: 10-60MSPS Frequency dependent biasing Internal/sample hold Differential input Low input capacitance Imaging Test equipment Computer scanners Communications Set top boxes Video products

The is a compact, high-speed, low power 12-bit monolithic analog-todigital converter, implemented in the TSMC Mixed-Signal MiM CMOS process. Versions with metal5 as top metal are available. The MiM capacitor uses metal2 as bottom plate as standard configuration. It has 12-bit resolution with close to 11 effective bits, and close to 12 bit dynamic range for video frequency signals. The converter includes a high bandwidth sample and hold. The full scale range is 1V. The full scale range can be set between 0.5V and 1V. It operates from a single 2.5V supply. Its low distortion and high dynamic range offers the performance needed for demanding imaging, multimedia, telecommunications and instrumentation applications. The bias current level for the ADC is automatically adjusted based on the clock input frequency. Hence, the power dissipation of the device is continuously minimised for the current operation frequency.

Supply voltage Supply current (60 MSPS) Power dissipation (60 MSPS) Power dissipation (10 MSPS) Power dissipation (sleep mode) Differential nonlinearity Integral nonlinearity Conversion rate Resolution

Except digital output drivers Except digital output drivers Except digital output drivers fIN=0.9991MHz 10

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 2.0 Page of 11 November 15th, 2001

The nAD1260-25 has a pipelined architecture - resulting in low input capacitance. Digital error correction of the 11 most significant bits ensures good linearity for input frequencies approaching Nyquist. The nAD1260-25 is compact. The core occupies 1,65mm2 die area in TSMC Mixed Signal MiM 0.25m CMOS process. The fully differential architecture makes it insensitive to substrate noise. Thus it is ideal as a mixed signal ASIC macro cell.

DIGITAL DELAYS, ERROR CORRECTION AND OUTPUT REGISTER

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 2.0 Page of 11 November 15th, 2001

(At = 25C, VDD = 2.5V, Sampling Rate = 60MHz, Input frequency = 10MHz dBFS, Differential input signal, 50% duty cycle clock unless otherwise noted).

Midscale offset Common Mode Rejection Ratio (of VOS) Dynamic Performance SINAD Signal to Noise and Distortion Ratio fIN = 10 MHz fIN = 40 MHz SNR Signal to Noise Ratio (without harmonics) fIN = 10 MHz SFDR Spurious Free Dynamic Range fIN = 10 MHz fIN = 40 MHz PSRR Power Supply Rejection Ratio (of VOS) Analog Input VFSR Input Voltage Range (differential) VCMI Common mode input voltage CINA Input Capacitance (differential) Reference Voltages VREFN Negative Input Voltage VREFP Positive Input Voltage 1 VRR Reference input voltage range VCM Common mode output voltage Digital Inputs VIL Logic "0" voltage VIH Logic "1" voltage IIL Logic "0" current (VI=VSS) IIH Logic "1" current (VI=VDD) CIND Input Capacitance Digital Outputs VOL Logic "0" voltage = 2 mA) VOH Logic "1" voltage = 2 mA) tH Output hold time tD Output delay time (table continued on next page)

Main office: Nordic VLSI ASA - Vestre Rosten 81, N-7075 Tiller, Norway - Phone +4772898900 - Fax +4772898989 Revision: 2.0 Page of 11 November 15th, 2001


 

Some Part number from the same manufacture Nordic VLSI
nAD1270-18T Analog to Digital Converter ip
NAD1280-18
nAD1280-18T
nAD1280-18TS
NAD1280-25 12-bit 80msps Sampling Analog-to-digital Converter
NAD2167 12-bit 20 MSPS Sampling Analog-to-digital Converter
NAD8200 8-bit 200 MSPS Analog-to- Digital Converter
nDA1005-18 General Purpose Digital to Analog Converter
nDA10200-18 Digital to Analog Converter ip
nDA10200x2-18a Dual Digital to Analog Converter ip
nDA10400-13 Digital to Analog Converter ip
nDA10400x2-13a Dual Digital to Analog Converter ip
NDA2496 Stereo 24-bit, 96khz Sampling Digital-to-analog Converter For Audio
nRF0433 Single Chip 433MHz RF Transceiver
NRF0433 Single Chip 433mhz RF Transceiver
NRF0433-EVKIT Nrf0433 Evaluation Kit
nRF2401 Single Chip 2.4GHz Radio Transceiver
nRF2402 NRF2402 Single Chip 2.4GHz Radio Transmitter
nRF24E1 2.4Ghz RF Transceiver With Embedded 8051 Compatible Microcontroller And 9 Input, 10 Bit ADC
nRF24E2 Single Chip RF Transmitter + MCU + ADC NRF2402 2.4GHz RF Transmitter
nRF401 Single Chip RF Transceiver 433MHz
Same catergory

AD394 : P Compatible Multiplying Quad 12-Bit D/A Converter.

ADS804E : ti ADS804, 12-Bit, 10 MSPS ADC Int/ext Ref., Flexible I/p Between 2 And 5Vpp, Out of Range Indicator, Pin Comp..

AK5352 : . GENERAL The 20-bit, 96kHz sampling rate for DAT and DVD, 64x oversampling rate(64fs), 2-channel A/D converter for stereo digital systems. The modulator in the AK5352 uses the new developed Enhanced Dual bit architecture. This new architecture achieves the wider dynamic range, while keeping much the same superior distortion characteristics as the conventional.

DAC703BH : ti DAC703, Monolithic 16-Bit Digital-to-analog Converters. q VOUT AND IOUT MODELS q HIGH ACCURACY: Linearity Error 0.0015% of FSR max Differential Linearity Error 0.003% of FSR max q MONOTONIC (at 15 bits) OVER FULL TEMPERATURE RANGE q PIN-COMPATIBLE WITH DAC72 q DUAL-IN-LINE PLASTIC AND HERMETIC CERAMIC AND SOIC Digital inputs are complementary binary coded and are TTL-, LSTTL-, 54/74C- and 54/74HC-compatible.

DAC709BH : Microprocessor-compatible 16-bit Digital-to-analog Converters. q TWO-CHIP CONSTRUCTION q HIGH-SPEED 16-BIT PARALLEL, 8-BIT (BYTE) PARALLEL, AND SERIAL INPUT MODES q DOUBLE-BUFFERED INPUT REGISTER CONFIGURATION q VOUT AND IOUT MODELS q HIGH ACCURACY: Linearity Error 0.003% of FSR max Differential Linearity Error 0.006% of FSR max q MONOTONIC (TO 14 BITS) OVER SPECIFIED TEMPERATURE RANGE q HERMETICALLY SEALED q LOW COST.

MAX1003 : Low-Power, 90Msps, Dual 6-Bit ADC. o Two Matched 6-Bit ADCs o High Sampling Rate: 90Msps per ADC o Low Power Dissipation: 350mW o Excellent Dynamic Performance: 5.85 ENOB with 20MHz Analog Input 5.7 ENOB with 50MHz Analog Input o 1/4LSB INL and DNL (typ) o Internal Bandgap Voltage Reference o Internal Oscillator with Overdrive Capability 55MHz (-0.5dB) Bandwidth Input Amplifiers with.

MAX190 : 75ksps, 5V, 12-Bit ADC With Track/hold And Reference.

PCM1704U : Audio DACs. ti PCM1704, SoundPlus(TM) 24-Bit, 96kHz Bicmos Sign-magnitude Digital-to-analog Converter.

TLV5613 : 2.7v to 5.5v 12-bit Parallel Digital-to-analog Converter With Power Down.

TLV5626CD : ti TLV5626, 8-Bit, 1 us Dual DAC, Serial Input, Pgrmable Int. Ref., Settling Time.

LTC2495 : The LTC2495 is a 16-channel (eight differential), 16-bit, No Latency ΔΣ ADC with Easy Drive technology and a 2-wire, I2C interface. The patented sampling scheme eliminates dynamic input current errors and the shortcomings of on-chip buffering through automatic cancellation of differential input current. This allows large external source impedances.

MAX109 : 8-Bit, 2.2Gsps ADC with Track/Hold Amplifier and 1:4 Demultiplexed LVDS Outputs The MAX109, 2.2Gsps, 8-bit, analog-to-digital converter (ADC) enables the accurate digitizing of analog signals with frequencies up to 2.5GHz. Fabricated on an advanced SiGe process, the MAX109 integrates a high-performance track/hold (T/H) amplifier, a quantizer, and a 1:4 demultiplexer.

DAC7728 : Octal Low Power 12-bit +/-15V Output Serial Input Digital-to-Analog Converter The DAC7728 is a low-power, octal, 12-bit digital-to-analog converter (DAC). With a 5V reference, the output can either be a bipolar 15V voltage when operating from a dual 15.5V (or higher) power supply, or a unipolar 0V to +30V voltage when operating from a +30.5V power.

AD9963 : 10-/12-Bit, Low Power, Broadband MxFE The AD9961/AD9963 are pin-compatible, 10-/12-bit, low power MxFE converters that provide two ADC channels with sample rates of 100 MSPS and two DAC channels with sample rates to 170 MSPS. These converters are optimized for transmit and receive signal paths of communication systems requiring low power and low cost.

 
0-C     D-L     M-R     S-Z