Compact Limit Switch Style with Universal Power Supply H FET output allows for solid state
H Universal AC/DC power supply H Choose cable or connector types H Sensitivity adjustment standard on all
H Wide selection of timing options H UL/CE/CSA approved H NEMA 4X, IP66 rated
Light source Fiber-optic cable attachment Output Relay y Connection 300-V cable 600-V cable 300-V cable 600-V cable FET 300-V cable 600-V cable 300-V cable 600-V cable Relay y FET MiniChange C a geR Connector MiniChange C a geR Connector No Yes No Yes No Yes Timer No Infrared LED E32-series large diameter fiber (4.75 mm) Part number E3JU-XRP4-MN1 E3JU-XRP4T-MN1 Red LED E32-series small diameter fiber (2.2 mm)
Specifications
Part number Supply voltage Power consumption (up to 264 VDC) Required fiber-optic cables Light source Operation mode Sensitivity Mutual interference protection Contact output Type Contact relay l Max. load Min. load Response time Solid state t relay Timer functions (models with timer) Circuit protection Indicators Materials Case Holder Clamp Cover Mounting Connections Prewired Connector Weight g Enclosure ratings g Cable type Connector type UL NEMA IEC 144 Approvals pp UL CSA CE Ambient temperature Operating Storage Type Max. load Response time Type/range Output short-circuit to 240 VAC !10%, 50/60 Hz; to 240 VDC, 10% max. peak-to-peak ripple Contact relay type 4.0 W max., solid state relay type 3.5 W max. (2.2 mm dia. 1 mm dia. E32-UjB series (4.75 mm dia.) with E39-F9) (See Note.) Red LED (660 mm) Light-ON/Dark-ON, switch selectable Adjustable Provided SPDT relay A, 250 VAC; 30 VDC rated (p.f.=1) 10 mA, 5 VDC minimum Models without timer and models set to NO Timer: (6 ms typ.), 12 ms OFF (5 ms typ.); Models with timer: to 10 sec (adjustable). Power MOSFET relay 400 mA AC/DC 40"C), 240 VAC., 100 VDC rated Models without timer and timer models set to No Timer: 8 ms ON, 12 ms OFF max. Models with timer: to 10 sec (adjustable). ON-delay, OFF-delay, ON/OFF delay, one-shot, delayed one-shot; switch to 10 seconds Not provided Light incident (red LED), output operation (yellow LED), stability (green LED) Plastic ABS/PC Plastic ABS/PC Plastic POM Plastic PC Two M5 front-mounting through holes. M30 externally threaded base and 1/2-14 NPSM internal threads for cable type: conduit torque not to exceed 100 in-lbs. (--6) 600 V-rated, AWG 20: 4-wire cable, AWG 21: 5-wire cable (--3) 300 V-rated, AWG 4-wire, 5-wire cables MiniChangeR type connector: 4 and 5 pins g (10.68 oz); g (7.88 oz) g (4.73 oz) Type 12 IP66 Listing E41515 Certification to 158"F) Infrared LED (950 mm)
Note: Must use fiber that can be inserted 15 mm into amplifier to meet sensing distance specification.
|
