|
|
Part: E3L-24-50
Category:
Optoelectronics
-> Photosensors
-> Photo electric
Description: E3L Laser Photoelectric Sensor Data Sheet
Company: Omron Corporation
Datasheet: Download E3L-24-50 datasheet File size : 592 kB
Request For quote: Find where to buy E3L-24-50
Datasheet text preview:
E3L
E3L
Laser Photoelectric Sensor
Prewired DC Sensor Provides LongDistance Sensing of Objects as Small as 0.1 mm
s Detect small objects over longer sensing
E3L
distances with highly accurate positioning
s Attachable apertures allow detection down
to 0.1 mm diameter s Alarm output signals deteriorating detection conditions due to improper alignment or dust contamination s Class I (FDA/IEC) laser product E3L-50, requires no additional protective equipment s Visible spot through-beam version aids in critical alignment applications
Ordering Information
s SENSORS
Method of detection Sensing distance Light source Laser class Part number NPN output PNP output Through-beam 10 m (32.8 ft) Visible red Class II E3L-2RC4 -- 2 m (6.56 ft) Infrared Class I E3L-2E4-50 E3L-2B4-50 Diffuse reflective 20 to 50 cm (7.9 to 19.7 in) Infrared C lass I E3L-DS50E4-50 --
s REPLACEMENT PARTS
Description Mounting bracket Sensitivity adjuster knob Apertures for through-beam types Aperture with 0.85 mm dia. opening Aperture with 0.10 mm dia. opening For through-beam type; supplied with E3L-2 4- 50, E3L-2RC4 For diffuse reflective type; supplied with E3L-DS50E4-50 Part number E39-L6 E39-L5 E39-G1 E39-S56 E39-S55
2
E3L
E3L
Specifications
Part number Method of detection Supply voltage Current consumption Sensing distance E3L-2RC4 (See Note.) Through-beam type 12 to 24 VDC, ±10% max. ripple peak-to-peak 50 mA max. 10 m (32.8 ft) with no aperture; 9 m (29.52 ft) with 3 mm aperture; 6 m (19.68 ft) with 2 mm aperture; 3 m (9.84 ft) with 1 mm aperture; 2 m (6.56 ft) with 0.85 mm aperture; 1 m (3.28 ft) with 0.5 mm aperture; 30 cm (11.81 in) with 0.1 mm aperture Visible red, pulse modulated laser diode (=670 nm) 480 µW max., Class II FDA/IEC 4 mm (0.16 in) dia. object minimum without aperture; With aperture - object minimum is same as aperture size 2 m (6.56 ft) with 0.85 mm dia. aperture; 20 cm (7.9 in) with 0.1 mm dia. aperture 40 mA max. 20 to 50 cm (7.9 to 19.7 in) with 2 x 2 mm (0.09 x 0.09 in) white mat paper E3L-2 4-50 E3L-DS50E4-50 Diffuse reflective
Light source
Infrared, pulse modulated laser diode (=780 nm) 25 µW max., Class I FDA/IEC
Detectable object type
0.5 mm (0.02 in) dia. object minimum with 0.85 mm dia. aperture 0.1 mm (0.003 in) dia. object minimum with 0.10 mm dia. aperture
Opaque, translucent objects 2 x 2 mm
Diameter of projected spot
With 4 mm dia. emitter, no aperture, at a distance of 2 m (6.56 ft), the incident light is 20 mm (0.79 in) in diameter
With 4 mm dia. emitter, at a distance of 50 cm (19.7 in) from the emitter, the incident light is 2 mm (0.08 in) in dia.
Directional angle Operation mode Sensitivity adjustment Mutual interference protection Control output DC solidstate Type Max. load
Emitter: 2° max., Receiver: 20° max. Light-ON/Dark-ON, wire selectable Light-ON: + red, - black; Dark-ON: - red, + black Adjustable Standard level NPN type, open collector NPN type: 100 mA max. NPN type, constant current source (E3LPNP type, open collector (E3L-2B4-50) E4-50)
NPN type: Load (relay, sink) logic: 80 mA max. Voltage (source) logic: 1.5 to 3 mA PNP type: Load (relay, source) logic: 80 mA max. 3 ms max. (both ON and OFF)
Response time Alarm output DC solidstate Type Max. load Residual voltage Response time Circuit protection Output shortcircuit DC power supply reverse polarity Indicators Materials Lens Case
1 ms max. (both ON and OFF) NPN (E3L50 mA, 24 VDC 1V E4-50); PNP (E3L-2B4-50)
Output turns ON after 100 ms delay when light receiving signal level is within unstabe zone. Provided Provided Light Incident (red LED), Stable Operation (green LED) Plastic, PMMA Diecast zinc
(This table continues on the next page)
Note: In consideration of vibration and other environmental and mounting conditions, the sensing distance values for the E3L-2RC4 are very conservative. If these conditions can be minimized, longer sensing distances are possible. Please see excess gain and operating range curves for more accurate sensing ranges.
3
E3L
Specifications Table - continued from previous page Part number Mounting E3L-2RC4 E3L-2 4-50 E3L-DS50E4-50
E3L
Two side mount M4 threaded holes or mounting bracket E39-L6 (supplied) Prewired 2 m (6.56 ft); 3 conductor cable for emitter, 3 conductor cable for receiver Emitter: 160 g (5.6 oz) Receiver: 175 g (6.2 oz) UL NEMA IEC 144 -- NEMA 4 IP67 -10°C to 50°C (14°F to 122°F) with no icing -30°C to 70°C (-22°F to 158°F) 2 m (6.56 ft); 3 conductor cable for emitter, 4 conductor cable for receiver
Two side mount M4 threaded holes or mounting bracket E39-L5 (supplied) 2 m (6.56 ft) 4 conductor cable
Connections
Weight Enclosure
250 g (8.8 oz)
Ambient
Operating Storage
s OUTPUT CIRCUIT DIAGRAMS
Sensor NPN output type
*
Through-beam
Diffuse reflective
* Alarm (orange) wire not present for E3L-2RC4 The indicator can be wired for Light Incident by connecting the black wires together as shown in the dotted line. For Power indication, connect the emitter's black wire to the receiver's blue wire.
PNP output type
The indicator can be wired for Light Incident by connecting the black wires together as shown in the dotted line. For Power indication, connect the emitter's black wire to the receiver's brown wire.
s TIMING CHARTS
(between brown and black)
(between blue and black)
(between blue and black)
(between brown and black)
4
E3L
s EXCESS GAIN
Through-beam Type E3L-2 4-50 Through-beam Type E3L-2RC4 Diffuse Reflective Type E3L-DS50E4-50
E3L
Slit 0.5, 1, 2, 3 mm dia.
Excess gain ratio
Excess gain ratio
Slit 0.85 mm dia. Slit 0.1 mm dia.
Sensing distance (cm)
Sensing distance (m)
Excess gain ratio
Sensing distance (cm)
s OPERATING RANGE
Through-beam Type E3L-2 4-50 without aperture Through-beam Type E3L-2 4-50 with 0.85 mm diameter aperture Through-beam Type E3L-2 4-50 with 0.1 mm diameter aperture
Parallel offset distance Y (mm)
Parallel offset distance Y (mm)
Sensing distance X (cm)
Sensing distance X (cm)
Parallel offset distance Y (mm)
Sensing distance X (cm)
Diffuse Reflective Type E3L-DS50E4-50
Through-beam Type E3L-2RC4 without aperture
Through-beam Type E3L-2RC4 with 1.0 mm diameter aperture
Parallel offset distance Y (mm)
Parallel offset distance Y (mm)
Sensing distance X (cm) with 2 x 2 mm white mat paper
Sensing distance X (m)
Parallel offset distance Y (mm)
Sensing distance X (m)
5
E3L
Through-beam Type E3L-2RC4 with 0.85 mm diameter aperture Through-beam Type E3L-2RC4 with 0.5 mm diameter aperture Through-beam Type E3L-2RC4 with 0.1 mm diameter aperture
E3L
Parallel offset distance Y (mm)
Parallel offset distance Y (mm)
Sensing distance X (m)
Sensing distance X (m)
Parallel offset distance Y (mm)
Sensing distance X (m)
Dimensions
Unit: mm (inch)
s THROUGH-BEAM TYPE E3L-2 4Sensitivity adjuster Cable 2 m length Indicators (for receiver only) Lens diameter
M
ounting holes
22.2
Mounting bracket E39-L6 supplied
Two M4 hexagonal bolts
N o t e : Mounting bracket E39-L6 can be attached to surface "A".
6
Others parts begin by e3
E3-1 E3-2 E3-3 E3-4
|
|
|
