Compact, Intelligent Panel Meter Offers NEMA 4X Water Resistance, Optional Communications Interface
Multi-purpose industrial process meter is ideal for many applications:
Process meter: 6 analog input ranges available: to 20 mA, to 20 mA; to 5 VDC, to 5 VDC; to +5 VDC, to +10 VDC RPM processor/Tachometer: 5 kHz max. input pulse frequency range Digital data display for PC or PLC (RS-485 communications)
Scaling in a wide range of engineering units. Programmable output operation action, decimal point position setting, teaching function for input range, leading zero suppression and average processing. Advanced display features enhance operator comprehension
5-digit display can be programmed to display red or green characters. Display can be programmed to change color when an output turns on. High-contrast backlit LCD display provides good legibility in most lighting conditions.
High accuracy: ±0.1% full scale. Selectable outputs: 2 relay outputs, 3 transistor outputs, RS-485 communications. Compact 1/32 DIN size saves panel space and shallow mounting depth allows thinner control cabinets: measures x 3.27 inches). Easy to configure from front panel or using Thermo Tools Software.
Stock Note: Shaded models are normally stocked. Input p type yp DC process p signal g or NPN pulse l input t DC process p signal g or PNP pulse l input i t Supply pp y voltage lt 24 VDC Output p No communications Dual relays (SPST-NO) Three NPN open collector Dual relays (SPST-NO) Three PNP open collector K3GN-PDT2 24VDC Model RS-485 communications K3GN-PDT2-FLK 24VDC
Stock Note: Shaded models are normally stocked. Description Sets all panel meter parameters, initiates teaching function. Use with RS-485 communications models. Model Thermo Tools (See Note)
Note: Contact Omron for current version information.
Supply voltage Operating voltage range Power consumption (See Note) Insulation resistance Dielectric withstand voltage Noise immunity Vibration resistance Shock resistance Malfunction Destruction Malfunction Destruction Ambient temperature p Ambient humidity Ambient atmosphere EMC Emission Enclosure Emission AC Mains Immunity ESD Immunity-RF-interference Immunity Conducted Disturbance Immunity Burst Approved standards Operating Storage Operating 24 VDC 110% of the rated supply voltage 2.5 W max. (at max. DC load with all indicators lit) 20 M min. at 500 VDC between external terminal and case. Insulation provided between inputs, outputs, and power supply. 1,000 VAC for 1 min between external terminal and case. Insulation provided between inputs, outputs, and power supply. V on power supply terminals in normal mode, V in common mode, ±1 µs, 100 ns for square-wave noise with to 55 Hz, 10 min each X, Y, and Z directions; acceleration: to 55 Hz, 30 min each X, Y, and Z directions; acceleration: 19.6 m/s2 Models with transistor outputs: 196 m/s2 for 3 times each X, Y, and Z directions Models with relay contact outputs: 98 m/s2 for 3 times each X, Y, and Z directions 294 m/s2 for 3 times each X, Y, and Z directions to 131°F) with no condensation or icing to 149°F) with no condensation or icing to 85% with no condensation Must be free of corrosive gas EN55011 Group 1 class A EN55011 Group 1 class EN61000-4-4: 4-kV contact discharge (level 2) 8-kV air discharge (level 3) 10 V/m (amplitude modulated, 80 MHz to 1 GHz) (level 3) 10 V/m (pulse modulated, 900 MHz) to 80 MHz) (level 3) 2-kV power-line (level 3) 2-kV I/O signal-line (level 4)
UL Listed, File No. to UL508 standard CSA Certified, File No. to CSA22.2 No. 142--M1987 standard Conforms EN61010-1 (IEC1010-1); conforms VDE106/part 100 (finger protection) when the terminal cover is mounted. Approx. 100 g
Note: A control power supply capacity greater than the rated capacity is required when the Digital Panel Meter is turned ON. Do not forget to take this into consideration when using several Digital Panel Meters. When power is supplied, all indicators will light and outputs will be OFF. When using startup compensation time operation, the display will read "00000" and all outputs will be OFF.
(Incorporating G6K Relays) Load type Rated load Rated carry current Max. contact voltage Max. contact current Max. switching capacity Min. permissible load (P level, reference value) Mechanical life Electrical life (at an ambient temperature of 23°C) Resistive load (cos at 30 VDC 1 A max. (at COM terminal) 60 VDC 1 A (at COM terminal) VA 10 mV, µA 50,000,000 times min. (at a switching frequency of 36,000 times/hr) 100,000 times min. (at the rated load with a switching frequency of 1,800 times/hr)
Rated load voltage Max. load current Leakage current 24 VDC 100 µA max.
Communications type Transmission method Synchronization method Baud rate Transmission code Communications Reading/Writing to the RS-485 2-wire, half-duplex Start-stop synchronization 1,200/2,400/4,800/9,600/19,200 bps ASCII Read/write set values, read/write scaling values, enable/disable the writing of data through communications, forced-zero control, and other data.
Input DC voltage Measuring range V DC current to 20.00 mA/ 20.00 mA Measuring accuracy FS ±1 digit max. FS ±1 digit g max. FS ±1 digit max. (73.4±5.4°F) 60 Input impedance 1 M min. Displayable range to 99999 (with ( t scaling sca g function) o )
Input No-voltage contact (30 Hz max.) with ON/OFF pulse width 16 ms min. Open collector (5 kHz max.) with ON/OFF pulse width 90 µs min. Measuring range 5000.0 Hz Measuring accuracy FS ±1 digit max. Displayable range to 99999 (with ( t scaling sca g function) o )