|
Details, datasheet, quote on part number:1N4007RL
| |
Datasheet text preview:
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
1N4004 and 1N4007 are Preferred Devices
Axial Lead Standard Recovery Rectifiers
This data sheet provides information on subminiature size, axial lead mounted rectifiers for general-purpose low-power applications.
Mechanical Characteristics
http://onsemi.com
· Case: Epoxy, Molded · Weight: 0.4 gram (approximately) · Finish: All External Surfaces Corrosion Resistant and Terminal · · · · · ·
Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 220°C Max. for 10 Seconds, 1/16 from case Shipped in plastic bags, 1000 per bag. Available Tape and Reeled, 5000 per reel, by adding a "RL" suffix to the part number Available in Fan-Fold Packaging, 3000 per box, by adding a "FF" suffix to the part number Polarity: Cathode Indicated by Polarity Band Marking: 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
LEAD MOUNTED RECTIFIERS 50-1000 VOLTS DIFFUSED JUNCTION
CASE 59-10 AXIAL LEAD PLASTIC
MARKING DIAGRAM
AL 1N 400x YYWW AL = Assembly Location 1N400x = Device Number x = 1, 2, 3, 4, 5, 6 or 7 YY = Year WW = Work Week 1N4004 400 1N4005 600 1N4006 800 1N4007 1000 Unit Volts
MAXIMUM RATINGS
Rating *Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage *Non-Repetitive Peak Reverse Voltage (halfwave, single phase, 60 Hz) *RMS Reverse Voltage *Average Rectified Forward Current (single phase, resistive load, 60 Hz, TA = 75°C) *Non-Repetitive Peak Surge Current (surge applied at rated load conditions) Operating and Storage Junction Temperature Range *Indicates JEDEC Registered Data Symbol VRRM VRWM VR VRSM VR(RMS) IO 1N4001 50 1N4002 100 1N4003 200
60 35
120 70
240 140
480 280 1.0
720 420
1000 560
1200 700
Volts Volts Amp
IFSM
30 (for 1 cycle)
Amp
TJ Tstg
-65 to +175
°C
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of this data sheet. Preferred devices are recommended choices for future use and best overall value.
© Semiconductor Components Industries, LLC, 2003
1
January, 2003 - Rev. 8
Publication Order Number: 1N4001/D
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
ELECTRICAL CHARACTERISTICS*
Rating Maximum Instantaneous Forward Voltage Drop (iF = 1.0 Amp, TJ = 25°C) Maximum Full-Cycle Average Forward Voltage Drop (IO = 1.0 Amp, TL = 75°C, 1 inch leads) Maximum Reverse Current (rated dc voltage) (TJ = 25°C) (TJ = 100°C) Maximum Full-Cycle Average Reverse Current (IO = 1.0 Amp, TL = 75°C, 1 inch leads) *Indicates JEDEC Registered Data Symbol vF VF(AV) IR 0.05 1.0 IR(AV) 10 50 30 µA Typ 0.93 Max 1.1 0.8 Unit Volts Volts µA
ORDERING & SHIPPING INFORMATION
Device 1N4001 1N4001FF 1N4001RL 1N4002 1N4002FF 1N4002RL 1N4003 1N4003FF 1N4003RL 1N4004 1N4004FF 1N4004RL 1N4005 1N4005FF 1N4005RL 1N4006 1N4006FF 1N4006RL 1N4007 1N4007FF 1N4007RL Package Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Axial Lead Shipping 1000 Units/Bag 3000 Units/Box 5000/Tape & Reel 1000 Units/Bag 3000 Units/Box 5000/Tape & Reel 1000 Units/Bag 3000 Units/Box 5000/Tape & Reel 1000 Units/Bag 3000 Units/Box 5000/Tape & Reel 1000 Units/Bag 3000 Units/Box 5000/Tape & Reel 1000 Units/Bag 3000 Units/Box 5000/Tape & Reel 1000 Units/Bag 3000 Units/Box 5000/Tape & Reel
http://onsemi.com
2
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
PACKAGE DIMENSIONS AXIAL LEAD CASE 59-10 ISSUE S
B
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 59-04 OBSOLETE, NEW STANDARD 59-09. 4. 59-03 OBSOLETE, NEW STANDARD 59-10. 5. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO-41 OUTLINE SHALL APPLY 6. POLARITY DENOTED BY CATHODE BAND. 7. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. DIM A B D F K INCHES MIN MAX 0.161 0.205 0.079 0.106 0.028 0.034 --- 0.050 1.000 --- MILLIMETERS MIN MAX 4.10 5.20 2.00 2.70 0.71 0.86 --- 1.27 25.40 ---
K F
D
A F K
http://onsemi.com
3
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada JAPAN: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative.
http://onsemi.com
4
1N4001/D
|
|
