|Category||Discrete => TVS (Transient Transient Voltage Suppressors)|
|Description||400W Zener Suppressor|
|Datasheet||Download 1SMA75A datasheet
|Cross ref.||Similar parts: SMAJ7.5A, 1SMA75AT3, TFMAJ75A|
|400 Watt Peak Power Zener Transient Voltage Suppressors
The SMA series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The SMA series is supplied in ON Semiconductor's exclusive, cost-effective, highly reliable Surmetict package and is ideally suited for use in communication systems, automotive, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications.PLASTIC SURFACE MOUNT ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS 400 W PEAK POWER
Working Peak Reverse Voltage Range 78 V Standard Zener Breakdown Voltage Range 91.25 V Peak Power 1 ms ESD Rating of Class 3 16 KV) per Human Body Model Response Time is Typically 1 ns Flat Handling Surface for Accurate Placement Package Design for Top Slide or Bottom Circuit Board Mounting Low Profile Package Pb-Free Packages are Available
Mechanical Characteristics CASE: Void-free, transfer-molded plastic FINISH: All external surfaces are corrosion resistant and leads are
260°C for 10 Seconds POLARITY: Cathode indicated by molded polarity notch or polarity band MOUNTING POSITION: Any= Specific Device Code = (See Table on Page 3) = Assembly Location = Year = Work Week
Device 1SMAxxAT3 1SMAxxAT3G Package SMA (Pb-Free) Shipping 5000/Tape & Reel 5000/Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.Individual devices are listed on page 3 of this data sheet.
Rating Peak Power Dissipation (Note = 25°C, Pulse Width ms DC Power Dissipation = 75°C Measured Zero Lead Length (Note 2) Derate Above 75°C Thermal Resistance from Junction to Lead DC Power Dissipation (Note = 25°C Derate Above 25°C Thermal Resistance from Junction to Ambient Forward Surge Current (Note = 25°C Operating and Storage Temperature Range Symbol PPK PD Value to +150 Unit W mW/°C °C/W W mW/°C °C/W A °C
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. X 1000 ms, non-repetitive 2. 1 square copper pad, FR-4 board 3. FR-4 board, using ON Semiconductor minimum recommended footprint, as shown in 403B case outline dimensions spec. 4. 1/2 sine wave (or equivalent square wave), = 8.3 ms, duty cycle = 4 pulses per minute maximum.
(TA = 25°C unless otherwise noted, 3.5 V Max. 30 A for all types) (Note 5) Symbol IPP Parameter Maximum Reverse Peak Pulse Current Clamping Voltage @ IPP Working Peak Reverse Voltage Maximum Reverse Leakage Current @ VRWM Breakdown Voltage @ IT Test Current Forward Current Forward Voltage @ IF5. 1/2 sine wave or equivalent, = 8.3 ms, non-repetitive duty cycle.
6. A transient suppressor is normally selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC or continuous peak operating voltage level 7. VBR measured at pulse test current at an ambient temperature 25°C 8. Surge current waveform per Figure 2 and derate per Figure 3 * The "G" suffix indicates Pb-Free package available.
|Related products with the same datasheet|
|Some Part number from the same manufacture ON Semiconductor|
|1SMA75AT3 400W Zener Suppressor|
|1SMA75AT3 400W Zener Suppressor , Package: Sma, Pins=2|
|1SMA75CA Zener Transient Voltage Suppressors|
|1SMA78CAT3 Zener Transient Voltage Suppressors , Package: Sma, Pins=2|
|1SMA8.0A Zener Transient Voltage Suppressors|
|1SMA8.0A 400W Zener Suppressor|
|1SMA8.0AT3 400W Zener Suppressor , Package: Sma, Pins=2|
|1SMA8.5A Zener Transient Voltage Suppressors|
|1SMA8.5A 400W Zener Suppressor|
|1SMA8.5AT3 Zener Sma Transient Voltage Suppressor 400W 11V TR, Package: Sma, Pins=2|
|1SMA9.0A Zener Transient Voltage Suppressors|
|1SMA9.0A 400W Zener Suppressor|
|1SMA9.0AT3 400W Zener Suppressor , Package: Sma, Pins=2|
|1SMAXXCAT3Series Zener Transient Voltage Suppressors|
|1SMAXXXAT3Series Zener Overvoltage Transient Suppressors|
|1SMB100A 600W Zener|
|1SMB100A Zener Transient Voltage Suppressors|
|1SMB100AT3 600W Zener|
|1SMB100AT3 Zener Transient Voltage Suppressors , Package: Sma, Pins=2|
AA143 : Germanium Diodes. Germanium Diode, Package : DO-7. Can be used in many AM, FM and TV-IF applications, replacing point contact devices. Applications AM/FM detectors Ratio detectors FM discriminators TV audio detectors RF input probes TV video detectors Flat junction capacitance High mechanical strength At least 1 million hours MTBF BKC's Sigma-BondTM plating for problem free solderability Absolute Maximum.
BYV32-100M : Screening Options Available = ;; Package = TO257AB (TO220M) ;; Type = Dual Fast Recovery Common Cathode Rectifier ;; Voltage (V) = 100V ;; Current (A) = 10A ;; VF(cont) = - ;; Trr(typ) = -.
CEP8030L : N-channel Logic Level Enhancement Mode Field Effect Transistor.
IRFE320 : 400V Single N-channel Hi-rel MOSFET in a 18-pin LCC Package. The leadless chip carrier (LCC) package represents the logical next step in the continual evolution of surface mount technology. Desinged be a close replacement for the TO-39 package, the LCC will give designers the extra flexibility they need to increase circuit board density. International Rectifier has engineered the LCC package to meet the specific.
MS2393 : RF & Microwave Transistors. The is a gold metallized, silicon NPN power transistor. The MS2393 is designed for applications requiring high peak power and low duty cycles such as IFF, DME and TACAN. The MS2393 is packaged in a metal/ceramic package with internal input/output matching, resulting in improved broadband performance and low thermal resistance. IMPORTANT: For the most.
TPC8105-H : VDDS = -30 ;; Id = -7 ;; Package Type = SOP-8 (Single P-ch).
05002120CMZB : CAPACITOR, CERAMIC, MULTILAYER, 200 V, BP, 0.000012 uF, SURFACE MOUNT, 0603. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Dielectric: Ceramic Composition ; Capacitance Range: 1.20E-5 microF ; Capacitance Tolerance: 20 (+/- %) ; WVDC: 200 volts ; Temperature Coefficient: 30 ppm/Â°C ; Mounting Style: Surface Mount Technology.
AVGA104M50BYF : CAPACITOR, ALUMINUM ELECTROLYTIC, NON SOLID, POLARIZED, 50 V, 0.1 uF, SURFACE MOUNT. s: RoHS Compliant: Yes ; : Polarized ; Capacitance Range: 0.1000 microF ; Capacitance Tolerance: 20 (+/- %) ; WVDC: 50 volts ; Leakage Current: 3 microamps ; ESR: 2.32E6 milliohms ; Mounting Style: Surface Mount Technology ; Operating Temperature: -40 to 105 C (-40.
L0805R220MPWRT : 1 ELEMENT, 22 uH, GENERAL PURPOSE INDUCTOR, SMD. s: Mounting Option: Surface Mount Technology ; Devices in Package: 1 ; Lead Style: WRAPAROUND ; Application: General Purpose, RF Choke ; Inductance Range: 22 microH ; Rated DC Current: 100 milliamps ; Operating Temperature: -25 to 105 C (-13 to 221 F).
NP60N04MUK-S18-AY : POWER, FET. These products are N-channel MOS Field Effect Transistors designed for high current switching applications. Super low on-state resistance RDS(on) 4.3 m MAX. (VGS 30 A) Low Ciss: Ciss 2450 pF TYP. (VDS 25 V) Designed for automotive application and AEC-Q101 qualified *1 Pb-free (This product does not contain Pb in the external electrode) Item Drain to Source.
PR135A21000BBGT : RES NET,THIN FILM,100 OHMS,75WV,.1% +/-TOL,-10,10PPM TC,1107 CASE. s: Configuration: Chip Array ; Category / Application: General Use.
1812Y5V104MT1AB : CAP,CERAMIC,100NF,25VDC,20% -TOL,20% +TOL,Y5V TC CODE,-82,22% TC,1812 CASE. s: Applications: General Purpose ; Electrostatic Capacitors: Ceramic Composition.
2SA1774-Q-TP : 150 mA, 50 V, PNP, Si, SMALL SIGNAL TRANSISTOR. s: Polarity: PNP ; Package Type: ROHS COMPLIANT, PLASTIC PACKAGE-3.
50398R : TELECOM TRANSFORMER. s: Category: Signal ; Other Transformer Types / Applications: Telecom ; Mounting: Chip Transformer ; Operating Temperature: -40 to 85 C (-40 to 185 F).
9220-20 : 1 ELEMENT, 680 uH, FERRITE-CORE, GENERAL PURPOSE INDUCTOR. s: Devices in Package: 1 ; Core Material: Ferrite ; Lead Style: Axial, WIRE ; Application: General Purpose, RF Choke ; Inductance Range: 680 microH ; Rated DC Current: 85 milliamps ; Operating Temperature: -55 to 105 C (-67 to 221 F).