Details, datasheet, quote on part number: 1SMA75AT3
CategoryDiscrete => TVS (Transient Transient Voltage Suppressors)
Description400W Zener Suppressor , Package: Sma, Pins=2
CompanyON Semiconductor
DatasheetDownload 1SMA75AT3 datasheet
Cross ref.Similar parts: SMAJ75A, SMAJ70A-TR, SM4T68AY, 1SMA75A
Find where to buy


Features, Applications
400 Watt Peak Power Zener Transient Voltage Suppressors

The SMA series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability, low zener impedance and fast response time. The SMA series is supplied in ON Semiconductor's exclusive, cost-effective, highly reliable Surmetict package and is ideally suited for use in communication systems, automotive, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications.


Working Peak Reverse Voltage Range 78 V Standard Zener Breakdown Voltage Range 91.25 V Peak Power ­ 400 Watts 1 ms ESD Rating of Class 3 16 KV) per Human Body Model Response Time is Typically 1 ns Flat Handling Surface for Accurate Placement Package Design for Top Slide or Bottom Circuit Board Mounting Low Profile Package

Mechanical Characteristics: CASE: Void-free, transfer-molded plastic FINISH: All external surfaces are corrosion resistant and leads are

POLARITY: Cathode indicated by molded polarity notch or polarity
= Specific Device Code = (See Table on Page 3) = Assembly Location = Year = Work Week
*Please see to 1SMA78CAT3 for Bidirectional devices. The "T3" suffix refers a 13 inch reel.

Rating Peak Power Dissipation (Note = 25°C, Pulse Width ms DC Power Dissipation = 75°C Measured Zero Lead Length (Note 2) Derate Above 75°C Thermal Resistance from Junction to Lead DC Power Dissipation (Note = 25°C Derate Above 25°C Thermal Resistance from Junction to Ambient Forward Surge Current (Note = 25°C Symbol PPK PD Value Unit W mW/°C °C/W W mW/°C °C/W A °C

Operating and Storage Temperature Range TJ, Tstg X 1000 ms, non­repetitive 2. 1 square copper pad, FR­4 board 3. FR­4 board, using ON Semiconductor minimum recommended footprint, as shown in 403B case outline dimensions spec. 4. 1/2 sine wave (or equivalent square wave), = 8.3 ms, duty cycle = 4 pulses per minute maximum.

(TA = 25°C unless otherwise noted, 3.5 V Max. 30 A for all types) (Note 5) Symbol IPP Parameter Maximum Reverse Peak Pulse Current Clamping Voltage @ IPP Working Peak Reverse Voltage Maximum Reverse Leakage Current @ VRWM Breakdown Voltage @ IT Test Current Forward Current Forward Voltage @ IF

5. 1/2 sine wave or equivalent, = 8.3 ms, non­repetitive duty cycle.

TS A transient suppressor is normally selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC or continuous peak operating voltage level 7. VBR measured at pulse test current at an ambient temperature 25°C 8. Surge current waveform per Figure 2 and derate per Figure 3


Related products with the same datasheet
Some Part number from the same manufacture ON Semiconductor
1SMA75CA Zener Transient Voltage Suppressors
1SMA78CAT3 Zener Transient Voltage Suppressors , Package: Sma, Pins=2
1SMA8.0A Zener Transient Voltage Suppressors
1SMA8.0A 400W Zener Suppressor
1SMA8.0AT3 400W Zener Suppressor , Package: Sma, Pins=2
1SMA8.5A Zener Transient Voltage Suppressors
1SMA8.5A 400W Zener Suppressor
1SMA8.5AT3 Zener Sma Transient Voltage Suppressor 400W 11V TR, Package: Sma, Pins=2
1SMA9.0A Zener Transient Voltage Suppressors
1SMA9.0A 400W Zener Suppressor
1SMA9.0AT3 400W Zener Suppressor , Package: Sma, Pins=2
1SMAXXCAT3Series Zener Transient Voltage Suppressors
1SMAXXXAT3Series Zener Overvoltage Transient Suppressors
1SMB100A 600W Zener
1SMB100A Zener Transient Voltage Suppressors
1SMB100AT3 600W Zener
1SMB100AT3 Zener Transient Voltage Suppressors , Package: Sma, Pins=2
1SMB10A 600W Zener
1SMB10A Zener Transient Voltage Suppressors
0-C     D-L     M-R     S-Z