Details, datasheet, quote on part number: BAW56W
PartBAW56W
CategoryDiscrete => Diodes & Rectifiers => Switching Diodes => Small Signal
TitleSmall Signal
DescriptionDual Switching Diode
CompanyON Semiconductor
DatasheetDownload BAW56W datasheet
Cross ref.Similar parts: M1MA141WAT1, M1MA141WA, M1MA142WAT1, DAP202U, CMSD2836, M1MA142WA, 1SS300, 1PS300, BAW56WT1
Quote
Find where to buy
 
  

 

Features, Applications

Rating Reverse Voltage Forward Current Peak Forward Surge Current Symbol VR IF IFM(surge) Max 200 500 Unit Vdc mAdc

Characteristic Total Device Dissipation FR = 25C Derate above 25C Thermal Resistance, Junction to Ambient Total Device Dissipation Alumina = 25C Derate above 25C Thermal Resistance, Junction to Ambient Junction and Storage Temperature Symbol PD Max 200 1.6 RqJA 300 2.4 RqJA TJ, Tstg to +150 Unit mW mW/C C/W mW mW/C C/W C

Reverse Breakdown Voltage (I(BR) = 100 Adc) Reverse Voltage Leakage Current (VR = 25 Vdc, = 150C) (VR = 70 Vdc) (VR = 70 Vdc, = 150C) Diode Capacitance (VR = 1.0 MHz) Forward Voltage (IF = 1.0 mAdc) (IF = 10 mAdc) (IF = 60 mAdc) (IF = 150 mAdc) Reverse Recovery Time (IF = 10 mAdc, 100 , IR(REC) = 1.0 mAdc) (Figure 1) 1. FR Alumina 0.4 0.3 V(BR) CD VF trr ns pF mVdc 70 Vdc Adc

Preferred devices are Motorola recommended choices for future use and best overall value.
Motorola SmallSignal Transistors, FETs and Diodes Device Data Motorola, Inc. 1997

0.1 F DUT 50 OUTPUT PULSE GENERATOR 50 INPUT SAMPLING OSCILLOSCOPE VR INPUT SIGNAL 90% IR iR(REC) 1.0 mA OUTPUT PULSE (IF = 10 mA; MEASURED at iR(REC) = 1.0 mA) t IF trr t

Notes: 2.0 k variable resistor adjusted for a Forward Current (IF) of 10 mA. Notes: 2. Input pulse is adjusted so IR(peak) is equal to 10 mA. Notes: tp trr

Figure 1. Recovery Time Equivalent Test Circuit
IR , REVERSE CURRENT (A) IF, FORWARD CURRENT (mA)
Motorola SmallSignal Transistors, FETs and Diodes Device Data
MINIMUM RECOMMENDED FOOTPRINT FOR SURFACE MOUNTED APPLICATIONS

Surface mount board layout is a critical portion of the total design. The footprint for the semiconductor packages must be the correct size to insure proper solder connection

interface between the board and the package. With the correct pad geometry, the packages will self align when subjected to a solder reflow process.

The power dissipation of the is a function of the collector pad size. This can vary from the minimum pad size for soldering to the pad size given for maximum power dissipation. Power dissipation for a surface mount device is determined by TJ(max), the maximum rated junction temperature of the die, RJA, the thermal resistance from the device junction to ambient; and the operating temperature, TA. Using the values provided on the data sheet, PD can be calculated as follows. PD = TJ(max) TA RJA the equation for an ambient temperature of 25C, one can calculate the power dissipation of the device which in this case is 200 milliwatts. = 200 milliwatts

The values for the equation are found in the maximum ratings table on the data sheet. Substituting these values into

The 0.625C/W assumes the use of the recommended footprint on a glass epoxy printed circuit board to achieve a power dissipation of 200 milliwatts. Another alternative would be to use a ceramic substrate or an aluminum core board such as Thermal CladTM. Using a board material such as Thermal Clad, a power dissipation of 300 milliwatts can be achieved using the same footprint.

The melting temperature of solder is higher than the rated temperature of the device. When the entire device is heated to a high temperature, failure to complete soldering within a short time could result in device failure. Therefore, the following items should always be observed in order to minimize the thermal stress to which the devices are subjected. Always preheat the device. The delta temperature between the preheat and soldering should 100C or less.* When preheating and soldering, the temperature of the leads and the case must not exceed the maximum temperature ratings as shown on the data sheet. When using infrared heating with the reflow soldering method, the difference should be a maximum of 10C.

The soldering temperature and time should not exceed When shifting from preheating to soldering, the After soldering has been completed, the device should

be allowed to cool naturally for at least three minutes. Gradual cooling should be used as the use of forced cooling will increase the temperature gradient and result in latent failure due to mechanical stress. Mechanical stress or shock should not be applied during cooling * Soldering a device without preheating can cause excessive thermal shock and stress which can result in damage to the device. maximum temperature gradient should 5C or less. 260C for more than 10 seconds.


 

Some Part number from the same manufacture ON Semiconductor
BAW56WT1 Common Anode DL Switching Diode , Package: SC-70 (SOT-323), Pins=3
BC161-16 Amplifier Transistor PNP Silicon
BC182 Transistor Silicon Plastic NPN , Package: TO-92 (TO-226), Pins=3
BC183 Amplifier NPN Silicon
BC184
BC212 Transistor Silicon Plastic PNP , Package: TO-92 (TO-226), Pins=3
BC212BRL1 General Purpose Transistor Pnp, Package: TO-92 (TO-226), Pins=3
BC212BZL1 Transistor Silicon Plastic PNP , Package: TO-92 (TO-226), Pins=3
BC214 General Purpose Transistor Pnp, Package: TO-92 (TO-226), Pins=3
BC237 Transistor Silicon NPN , Package: TO-92 (TO-226), Pins=3
BC237B General Purpose Transistor Npn, Package: TO-92 (TO-226), Pins=3
BC237BRL1 Transistor Silicon NPN , Package: TO-92 (TO-226), Pins=3
BC238 Amplifier NPN Silicon
BC238B Amlifier Transistors NPN Silicon
BC238BRL1 Transistor Silicon NPN , Package: TO-92 (TO-226), Pins=3
BC239 Amlifier Transistors NPN Silicon
BC239C General Purpose Transistor Npn, Package: TO-92 (TO-226), Pins=3
BC307 Amplifier Transistor PNP
BC307B Transistor Silicon PNP , Package: TO-92 (TO-226), Pins=3
BC308 Amplifier Transistor PNP
BC308C General Purpose Transistor Pnp, Package: TO-92 (TO-226), Pins=3
Same catergory

2SB1126 : PNP Epitaxial Planar Silicon Transistor, For Various Drivers. Applications Relay drivers, hammer drivers, lamp drivers, motor drivers, High DC current gain (4000 or greater). Large current capacity. Very small size making it easy to provide highdensity, small-sized hybrid IC's. s Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse).

2SC3461 : For Switching Regulators. NPN Triple Diffused Planar Type Silicon Transistor High breakdown voltage and high reliability. Fast switching speed (tf : 0.1s typ). Wide ASO. Adoption of MBIT process. s Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature.

3N170 : 25 V, N-channel Enhancement Mode MOSFET Switch. HANDLING PRECAUTIONS MOS field-effect transistors have extremely high input resistance and can be damaged by the accumulation of excess static charge. To avoid possible damage to the device while wiring, testing, or in actual operation, follow the procedures outlined below. 1. To avoid the build-up of static charge, the leads of the devices should remain.

CEB21A2 : N chanel. N-channel Enhancement Mode Field Effect Transistor TO220/TO263 Package.

FR101G : Glass Passivated. Pakage = DO-41 ;; Max. Reverse Voltage VRM (V)= 50 ;; Max. Aver. Rect. Current io (A)= 1 ;; Ifsm (A)= 30.

IN746A : Half Watt Zeners. Storage Temperature Range Maximum Junction Operating Temperature Lead Temperature (1/16" from case for 10 seconds) Total Device Dissipation Derate above 25C *These ratings are limiting values above which the serviceability of the diode may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 200 degrees C. 2) These are steady.

IRFZ44ND : . Die size X 74.4 mils) Metalization: Top: Al/Si/Cu Back: Ti/Ni/Ag Metal Thickness: Top: 3.0m Back: 1.4m Die thickness: - 13 mils Bonding Area: Source: Full metalized surface of source region Gate: x 506m Recommended Wire Bonding: Source: 12 mil Al wire (2 wires preferred) Gate: 5 mil Al wire Note: More source wires can further improve performance.

QR3310001 : Fast Recovery Diode Module ( 100 Amp/3300 Volts ). Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania (724) 925-7272 Powerex Fast Recovery Diode Modules are designed for use in applications requiring fast switching. The modules are isolated for easy mounting with other components on a common heatsink. : QR_3310001 Fast Recovery Diode Module 100 Amperes / 3300 Volts Fast Recovery Time (1.2 s max.).

2200RM : Bobbin Wound Surface Mount Inductors Bobbin Wound Surface Mount Inductors.

PSMN2R0-60PS : N-channel 60 V 2.0 M Standard Level MOSFET In TO-220 Standard level N-channel MOSFET in a TO-220 package qualified to 175 C. This product is designed and qualified for use in a wide range of industrial, communications and domestic equipment..

AUIRF7805Q : Automotive Q101 30V Single N-Channel HEXFET Power MOSFET In A SO-8 Package IR serves the automotive market with a dedicated product portfolio, with high quality and automotive certified development, manufacturing and assembly sites and a supply chain that fully complies with the challenging demands and expectations of the automotive industry. Our five.

FQP4N20J69Z : 3.6 A, 200 V, 1.4 ohm, N-CHANNEL, Si, POWER, MOSFET. s: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 200 volts ; rDS(on): 1.4 ohms ; Package Type: TO-220, TO-220, 3 PIN ; Number of units in IC: 1.

PT88BG104J : CAPACITOR, FILM/FOIL, POLYPROPYLENE, 800 V, 0.1 uF, CHASSIS MOUNT. s: Technology: Film Capacitors ; Applications: General Purpose ; Electrostatic Capacitors: Polypropylene ; Capacitance Range: 0.1000 microF ; Capacitance Tolerance: 5 (+/- %) ; WVDC: 800 volts ; Mounting Style: CHASSIS MOUNT ; Operating Temperature: -55 to 105 C (-67 to 221 F).

T2512DKS : 400 V, 25 A, 4 QUADRANT LOGIC LEVEL TRIAC. s: Thyristor Type: Triac, 4 QUADRANT LOGIC LEVEL TRIAC ; Pin Count: 3 ; VDRM: 400 volts ; IT(RMS): 25 amps.

TVZ14EB181KBL : RESISTOR, VOLTAGE DEPENDENT, 150 V, 53 J, THROUGH HOLE MOUNT. s: Category / Application: General Use ; Mounting / Packaging: ThroughHole, Radial Leads, RADIAL LEADED ; Operating DC Voltage: 150 volts ; Operating Temperature: -55 to 85 C (-67 to 185 F).

176S101 : RESISTOR, TRIMMER, WIRE WOUND, 22 TURN(S), 1 W, 100 ohm. s: Category / Application: General Use ; Technology / Construction: Wirewound ; Mounting / Packaging: ThroughHole, 3/8 INCH, RECTANGULAR, 3 PINS ; Resistance Range: 100 ohms ; Tolerance: 5 +/- % ; Power Rating: 1 watts (0.0013 HP) ; Operating Temperature: 85 to 150 C (185 to 302 F).

1GH45TPA1 : 1 A, 400 V, SILICON, SIGNAL DIODE. s: Diode Type: General Purpose ; IF: 1000 mA ; trr: 0.2000 ns.

2N2412XG4 : 100 mA, 20 V, PNP, Si, SMALL SIGNAL TRANSISTOR, TO-206AA. s: Polarity: PNP ; Package Type: HERMETIC SEALED, METAL, TO-18, 3 PIN.

74478222 : GENERAL PURPOSE INDUCTOR. s: Application: General Purpose. Kunde / customer : Artikelnummer / part number : Bezeichnung : : Eigenschaften / properties Induktivitt / inductance Gte / Q factor DC-Widerstand / DC-resistance Nennstrom / rated current Eigenres.-Frequenz / self-res.-frequency Testbedingungen / test conditions 100 MHz 800 MHz Wert / value Einheit / unit tol. 5% Typ. Basismaterial / base material:.

 
0-C     D-L     M-R     S-Z