|
|
Part: MAC16N
Category:
Discrete
-> Thyristors
-> Triacs
Description: Triacs , Package: TO-220, Pins=3
Company: ON Semiconductor
Datasheet: Download MAC16N datasheet File size : 886 kB
Request For quote: Find where to buy MAC16N
Datasheet text preview:
MAC16D, MAC16M, MAC16N
Preferred Device
Triacs
Silicon Bidirectional Thyristors
Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. · Blocking Voltage to 800 Volts · On-State Current Rating of 16 Amperes RMS at 80°C · Uniform Gate Trigger Currents in Three Quadrants · High Immunity to dv/dt -- 500 V/µs minimum at 125°C · Minimizes Snubber Networks for Protection · Industry Standard TO-220AB Package · High Commutating di/dt -- 9.0 A/ms minimum at 125°C · Device Marking: Logo, Device Type, e.g., MAC16D, Date Code
http://onsemi.com
TRIACS 16 AMPERES RMS 400 thru 800 VOLTS
MT2 G
MT1
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating Peak Repetitive OffState Voltage(1) (TJ = 40 to 125°C, Sine Wave, 50 to 60 Hz, Gate Open) MAC16D MAC16M MAC16N On-State RMS Current (Full Cycle Sine Wave, 60 Hz, TC = 80°C) Peak Non-Repetitive Surge Current (One Full Cycle Sine Wave, 60 Hz, TJ = 125°C) Circuit Fusing Consideration (t = 8.3 ms) Peak Gate Power (Pulse Width 1.0 µs, TC = 80°C) Average Gate Power (t = 8.3 ms, TC = 80°C) Operating Junction Temperature Range Storage Temperature Range Symbol VDRM, VRRM 400 600 800 IT(RMS) 16 Amps 1 ITSM 150 Amps Value Unit Volts 4
2
3
I2t PGM PG(AV) TJ Tstg
93 20 0.5 40 to +125 40 to +150
A2sec Watts 1 Watt °C °C 2 3 4
TO220AB CASE 221A STYLE 4
PIN ASSIGNMENT
Main Terminal 1 Main Terminal 2 Gate Main Terminal 2
ORDERING INFORMATION
Device MAC16D MAC16M MAC16N Package TO220AB TO220AB TO220AB Shipping 50 Units/Rail 50 Units/Rail 50 Units/Rail
(1) VDRM and VRRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
Preferred devices are recommended choices for future use and best overall value.
© Semiconductor Components Industries, LLC, 2000
1
May, 2000 Rev. 2
Publication Order Number: MAC16D/D
MAC16D, MAC16M, MAC16N
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance -- Junction to Case -- Junction to Ambient Maximum Lead Temperature for Soldering Purposes 1/8 from Case for 10 Seconds Symbol RJC RJA TL Value 2.0 62.5 260 Unit °C/W °C
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted; Electricals apply in both directions)
Characteristic Symbol Min Typ Max Unit
OFF CHARACTERISTICS
Peak Repetitive Blocking Current (VD = Rated VDRM, VRRM; Gate Open) TJ = 25°C TJ = 125°C IDRM, IRRM mA -- -- -- -- 0.01 2.0
ON CHARACTERISTICS
Peak On-State Voltage* (ITM = ± 21 A Peak) Gate Trigger Current (Continuous dc) (VD = 12 V, RL = 100 ) MT2(+), G(+) MT2(+), G() MT2(), G() Holding Current (VD = 12 V, Gate Open, Initiating Current = ±150 mA) Latching Current (VD = 24 V, IG = 50 mA) MT2(+), G(+) MT2(+), G() MT2(), G() Gate Trigger Voltage (VD = 12 V, RL = 100 ) MT2(+), G(+) MT2(+), G() MT2(), G() VTM IGT 10 10 10 IH IL -- -- -- VGT 0.5 0.5 0.5 0.75 0.72 0.82 1.5 1.5 1.5 33 36 33 50 80 50 Volts -- 16 18 22 20 50 50 50 50 mA mA -- 1.2 1.6 Volts mA
DYNAMIC CHARACTERISTICS
Rate of Change of Commutating Current, See Figure 10. (VD = 400 V, ITM = 6.0 A, Commutating dv/dt = 24 V/µs, Gate Open, TJ = 125°C, f = 250 Hz, No Snubber) CL = 10 µF LL = 40 mH Critical Rate of Rise of Off-State Voltage (VD = Rated VDRM, Exponential Waveform, Gate Open, TJ = 125°C) *Indicates Pulse Test: Pulse Width 2.0 ms, Duty Cycle 2%. (di/dt)c 9.0 -- -- A/ms
dv/dt
500
--
--
V/µs
http://onsemi.com
2
MAC16D, MAC16M, MAC16N
Voltage Current Characteristic of Triacs (Bidirectional Device)
+ Current Quadrant 1 MainTerminal 2 +
Symbol
VDRM IDRM VRRM IRRM VTM IH
Parameter
Peak Repetitive Forward Off State Voltage Peak Forward Blocking Current Peak Repetitive Reverse Off State Voltage Peak Reverse Blocking Current Maximum On State Voltage Holding Current IH Quadrant 3 VTM MainTerminal 2 IRRM at VRRM on state
VTM IH
off state
+ Voltage IDRM at VDRM
Quadrant Definitions for a Triac
MT2 POSITIVE (Positive Half Cycle) +
(+) MT2
(+) MT2
Quadrant II
() IGT GATE MT1 REF
(+) IGT GATE MT1 REF
Quadrant I
IGT () MT2 () MT2
+ IGT
Quadrant III
() IGT GATE MT1 REF
(+) IGT GATE MT1 REF
Quadrant IV
MT2 NEGATIVE (Negative Half Cycle) All polarities are referenced to MT1. With inphase signals (using standard AC lines) quadrants I and III are used.
http://onsemi.com
3
Others parts begin by ma
|
|
|
