Details, datasheet, quote on part number: MC74HC157AFL2
PartMC74HC157AFL2
CategoryLogic => Multiplexers/Demultiplexers => Multiplexers
TitleMultiplexers
DescriptionData Selector/multiplexer 2-Input Q , Package: Soic, Pins=16
CompanyON Semiconductor
DatasheetDownload MC74HC157AFL2 datasheet
Quote
Find where to buy
 
  

 

Features, Applications

The MC74HC157A is identical in pinout to the LS157. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. This device routes 2 nibbles to a single port (Y) as determined by the Select input. The data is presented at the outputs in noninverted form. A high level on the Output Enable input sets all four Y outputs to a low level.

Output Drive Capability: 10 LSTTL Loads Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 6.0 V Low Input Current: 1.0 µA High Noise Immunity Characteristic of CMOS Devices In Compliance with the Requirements Defined by JEDEC Standard No. 7A Chip Complexity: 82 FETs or 20.5 Equivalent Gates

A0 NIBBLE A INPUTS A3 B0 NIBBLE B INPUTS B2 B3 PIN 16 = VCC PIN 8 = GND Y2 Y3 DATA OUTPUTS
TSSOP­16 DT SUFFIX CASE WW = Assembly Location = Wafer Lot = Year = Work Week HC 157A ALYW

Device MC74HC157ADT MC74HC157ADTR2 Package SOIC­16 TSSOP­16 Shipping 2000 / Box 48 / Rail 2500 / Reel 96 / Rail 2500 / Reel

X = don't care B3 = the levels of the respective Data­Word Inputs.

Symbol VCC Vin Parameter Value Unit V DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) 0.5 to VCC to VCC Vout Iin DC Output Voltage (Referenced to GND) DC Input Current, per Pin mA Iout DC Output Current, per Pin ICC PD DC Supply Current, VCC and GND Pins Power Dissipation in Still Air, Plastic DIP SOIC Package TSSOP Package mW Tstg TL Storage Temperature 150 260

This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high­impedance circuit. For proper operation, Vin and Vout should be constrained to the range GND (Vin or Vout) VCC. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused outputs must be left open.

Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP, SOIC or TSSOP Package)

*Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. Derating Plastic DIP: ­ 10 mW/_C from to 125_C SOIC Package: ­ 7 mW/_C from to 125_C TSSOP Package: ­ 6.1 mW/_C from to 125_C For high frequency or heavy load considerations, see Chapter 2 of the ON Semiconductor High­Speed CMOS Data Book (DL129/D).

Symbol VCC Parameter Min 2.0 0 Max 6.0 Unit V DC Supply Voltage (Referenced to GND) DC Input Voltage, Output Voltage (Referenced to GND) Vin, Vout TA VCC Operating Temperature, All Package Types Input Rise and Fall Time (Figure


Guaranteed Limit 85_C Symbol Iin Parameter Test Conditions VCC 25_C 125_C Unit µA Maximum Input Leakage Current Maximum Three­State Leakage Current Vin = VCC or GND IOZ Output in High­Impedance State Vin = VIL or VIH Vout = VCC or GND Vin = VCC or GND Iout 0 µA ICC Maximum Quiescent Supply Current (per Package) µA NOTE: Information on typical parametric values can be found in Chapter 2 of the ON Semiconductor High­Speed CMOS Data Book (DL129/D).

Maximum Propagation Delay, Input B to Output Y (Figures 1 and 4)
Maximum Propagation Delay, Select to Output Y (Figures 2 and 4)
Maximum Propagation Delay, Output Enable to Output Y (Figures 3 and 4)
Maximum Output Transition Time, Any Output (Figures 1 and 4)

NOTE: For propagation delays with loads other than 50 pF, and information on typical parametric values, see Chapter 2 of the ON Semiconductor High­Speed CMOS Data Book (DL129/D). Typical @ 25°C, VCC 5.0 V CPD Power Dissipation Capacitance (Per Package)* 33 pF

* Used to determine the no­load dynamic power consumption: CC V CC. For load considerations, see Chapter 2 of the ON Semiconductor High­Speed CMOS Data Book (DL129/D).


 

Related products with the same datasheet
MC74HC157ADR2
MC74HC157ADT
MC74HC157ADTR2
MC74HC157AF
MC74HC157AFL1
MC74HC157AFR1
MC74HC157AFR2
MC74HC157AN
Some Part number from the same manufacture ON Semiconductor
MC74HC157AFR1 Data Selector/multiplexer 2-Input Q , Package: Soic, Pins=16
MC74HC157ATEL Quad 2-input Data Selector/multiplexer
MC74HC158A
MC74HC161A Presettable Counter
MC74HC161AD Presettable Counter , Package: Soic, Pins=16
MC74HC161AFEL Presettable Counter, Package: SOEIAJ-16, Pins=16
MC74HC161AFL1 Presettable Counter , Package: Soic, Pins=16
MC74HC162
MC74HC163AD Presettable Counter , Package: Soic, Pins=16
MC74HC163AFEL Presettable Counter, Package: SOEIAJ-16, Pins=16
MC74HC163AFL1 Presettable Counter , Package: Soic, Pins=16
MC74HC164
MC74HC164A 8-bit Serial-input/parallel-output Shift Register
MC74HC164AD Shift 8-Bit Serial Input/output , Package: Soic, Pins=14
MC74HC164ADTR2 Shift 8-Bit Serial Input/Output, Package: Tssop, Pins=14
MC74HC164AF Shift 8-Bit Serial Input/output , Package: Soic, Pins=14
MC74HC164AFEL Shift 8-Bit Serial Input/Output, Package: Tssop, Pins=14
MC74HC164AFL1 Shift 8-Bit Serial Input/output , Package: Soic, Pins=14
MC74HC165
MC74HC165A 8-bit Serial or Parallel-input/ Serial-output Shift Register
MC74HC165AD 8-Bit Serial or Parallel-input/serial Output Shift Register , Package: Soic, Pins=16

LM311 : Highly Flexible Voltage Comparator

MMBZ5252BLT1 : 2.4V Zener

MMFT2955E : Medium Power Field Effect Transistor P-channel Enhancement Mode Silicon Gate Tmos E-FET Sot-223 For Surface Mount: -60v, -1.2a

NTR4503NT1 : Power MOSFET 30 V, 2.5 A, Single N-channel SOT-23

MC7809CD2TR4G : 1.0 A Positive Voltage Regulators

LV49157V-TLM-H : Linear - Amplifier - Audio Integrated Circuit (ics) Class D Tape & Reel (TR) 9 V ~ 18 V; IC AMP AUDIO CLASS D BTL 44SSOP Specifications: Package / Case: 44-LSSOP (0.220", 5.60mm Width) Exposed Pad ; Type: Class D ; Output Type: 2-Channel (Stereo) with Stereo Headphones ; Voltage - Supply: 9 V ~ 18 V ; Packaging: Tape & Reel (TR) ; Features: Mute, Short-Circuit and Thermal Protection, Standby ; Max Output Power x C

CAT28F020GI12 : Memory Integrated Circuit (ics) FLASH Tube 4.5 V ~ 5.5 V; IC FLASH 2MBIT 120NS 32PLCC Specifications: Memory Type: FLASH ; Memory Size: 2M (256K x 8) ; Speed: 120ns ; Interface: Parallel (Byte-wide) ; Package / Case: 32-PLCC ; Packaging: Tube ; Voltage - Supply: 4.5 V ~ 5.5 V ; Operating Temperature: -40°C ~ 85°C ; Format - Memory: FLASH ; Lead Free Status: Lead Free ; RoHS Status: R

SSRD8620CTRG : Diodes, Rectifier - Single Discrete Semiconductor Product; DIODE ULTRASOFT 6A 200V DPAK Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

 
0-C     D-L     M-R     S-Z