Details, datasheet, quote on part number: MC74HC1G32DFT2
PartMC74HC1G32DFT2
CategoryLogic => Gates
DescriptionSingle 2-Input OR GATE , Package: SC-88A (SOT-353), Pins=5
CompanyON Semiconductor
DatasheetDownload MC74HC1G32DFT2 datasheet
Cross ref.Similar parts: SN74AHC1G32DCKR
Quote
Find where to buy
 
  

 

Features, Applications

The is a high speed CMOS 2­input OR gate fabricated with silicon gate CMOS technology. The internal circuit is composed of multiple stages, including a buffer output which provides high noise immunity and stable output. The MC74HC1G32 output drive current is 1/2 compared to MC74HC series.

High Speed: tPD 7 ns (Typ) at VCC 5 V Low Power Dissipation: ICC 1 mA (Max) = 25_C High Noise Immunity Balanced Propagation Delays (tpLH = tpHL) Symmetrical Output Impedance (IOH = IOL = 2 mA) Chip Complexity: FET = 44

See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet.

Symbol VCC VIN VOUT IIK IOK IOUT ICC TSTG TL TJ qJA PD MSL FR VESD DC Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Sink Current DC Supply Current per Supply Pin Storage Temperature Range Lead Temperature, 1 mm from Case for 10 Seconds Junction Temperature Under Bias Thermal Resistance Power Dissipation in Still Air at 85_C Moisture Sensitivity Flammability Rating ESD Withstand Voltage Oxygen Index: to 34 Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) Above VCC and Below GND at 125_C (Note 5) SC70­5/SC­88A/SOT­353 (Note SC70­5/SC­88A/SOT­353 SOT23­5/TSOP­5/SC59­5 Parameter Value *0.5 to VCC *0.5 to VCC to Level u2000 u200 N/A $500 V Unit mA _C _C/W mW

Maximum Ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute­maximum­rated conditions is not implied. Functional operation should be restricted to the Recommended Operating Conditions. 1. Measured with minimum pad spacing an FR4 board, using 10 mm­by­1 inch, 20 ounce copper trace with no air flow. 2. Tested EIA/JESD22­A114­A. 3. Tested EIA/JESD22­A115­A. 4. Tested JESD22­C101­A. 5. Tested to EIA/JESD78.

Symbol VCC VIN VOUT tf DC Supply Voltage DC Input Voltage DC Output Voltage Operating Temperature Range Input Rise and Fall Time VCC 2.0 V VCC 3.0 V VCC 4.5 V VCC 6.0 V Parameter Min Max 6.0 VCC Unit _C ns

DEVICE JUNCTION TEMPERATURE VERSUS TIME TO 0.1% BOND FAILURES
FAILURE RATE OF PLASTIC = CERAMIC UNTIL INTERMETALLICS OCCUR 80_C 100 TIME, YEARS
Figure 3. Failure Rate vs. Time Junction Temperature

VIN = VIH or VIL IOL 2 mA IOL 2.6 mA IIN ICC Maximum Input Leakage Current Maximum Quiescent Supply Current VIN V or GND VIN = VCC or GND

= 25_C Typ v 125_C Min Max 25 Symbol tPLH, tPHL Parameter Test Conditions Min Max 15 Min Max Unit ns Maximum Propagation Delay Delay, Input to Y VCC 50 pF VCC 2.0 V VCC 3.0 V VCC 4.5 V VCC 6.0 V VCC 5.0 V tTLH, tTHL Output Transition Time pF ns VCC 2.0 V VCC 3.0 V VCC 4.5 V VCC 6.0 V CIN Maximum Input Capacitance pF Typical @ 25_C, VCC V 10 CPD Power Dissipation Capacitance (Note pF 6. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no­load dynamic power consumption; PD = CPD VCC2 fin + ICC VCC.


 

Related products with the same datasheet
MC74HC1G32DTT1
Some Part number from the same manufacture ON Semiconductor
MC74HC1G32DTT1 Single 2-Input OR GATE , Package: SC-88A (SOT-353), Pins=5
MC74HC1GU04 Unbuffered Inverter
MC74HC1GU04DFT1
MC74HC1GU04DFT2 Unbuffered Inverter , Package: SC-88A (SOT-353), Pins=5
MC74HC20
MC74HC240A Octal With 3-state Outputs Inverting Buffer/line Driver/line Receiver
MC74HC240ADT Octal Buffer , Package: Tssop, Pins=20
MC74HC240ADTR2 Octal Buffer, Package: Tssop, Pins=20
MC74HC240ADW Octal Buffer , Package: Tssop, Pins=20
MC74HC240AFEL Octal Buffer, Package: Tssop, Pins=20
MC74HC240AN Octal Buffer , Package: Tssop, Pins=20
MC74HC241A
MC74HC244A Octal With 3-state Outputs Non-inverting Buffer/line Driver/line Receiver
MC74HC244ADT Octal Buffer , Package: Tssop, Pins=20
MC74HC244ADTR2 Octal Buffer, Package: Tssop, Pins=20
MC74HC244ADW Octal Buffer , Package: Tssop, Pins=20
MC74HC244AFEL Octal Buffer, Package: Tssop, Pins=20
MC74HC244AN Octal Buffer , Package: Tssop, Pins=20
MC74HC244ASDR2 Octal Buffer, Package: Tssop, Pins=20
MC74HC245A Octal With 3-state Outputs Non-inverting Bus Transceiver
MC74HC245ADT Octal 3-State Non-inverting Bus/transceiver , Package: Tssop, Pins=20

BC846BPDW1T1 : Dual General Purpose Transistors , Package: SC-88 (SOT-363), Pins=6

BSS64LT1 : Small Signal General Purpose NPN , Package: SOT-23 (TO-236), Pins=3

MC74AC374MEL : Octal D-type Flip-flop With 3-State Outputs, Package: Tssop, Pins=20

MMBF4392LT1G : JFET Switching Transistors N-channel

MMSZ3V3CW : Zener Voltage Regulators

NCV7356D : Single Wire CAN Transceiver

MC78M15ACDTRKG : 500 mA Positive Voltage Regulators

BZX85C51G : 1 Watt Do-41 Hermetically Sealed Glass Zener Voltage Regulators

NOIV1SN5000A-QDC : Image, Camera IC IMAGE SENSOR 5.3MP 68LLC -; IC IMAGE SENSOR 5.3MP 68LLC Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

NCP4683DSQ28T1G : Pmic - Voltage Regulator - Linear (ldo) Integrated Circuit (ics); IC REG LDO 300MA 2.80V SC-70 Specifications: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

SMF43AT1G : Tv - Diode Circuit Protection 43V 200W; TVS ZENER 200W 43V SOD123FL Specifications: Package / Case: SOD-123F ; Packaging: Tape & Reel (TR) ; Polarization: Unidirectional ; Power (Watts): 200W ; Voltage - Reverse Standoff (Typ): 43V ; Voltage - Breakdown: 47.8V ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

P6KE47ARLG : Tv - Diode Circuit Protection 40.2V 600W; TVS ZENER UNIDIR 600W 47V AXIAL Specifications: Package / Case: T-18, Axial ; Packaging: Tape & Reel (TR) ; Polarization: Unidirectional ; Power (Watts): 600W ; Voltage - Reverse Standoff (Typ): 40.2V ; Voltage - Breakdown: 44.7V ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

Same catergory

74ALVC02 : 74ALVC02; Quad 2-input NOR GATE;; Package: SOT108-1 (SO14), SOT402-1 (TSSOP14).

HCF4067 : HCF->CMOS 4000B Series. Analog Multiplexer/demultiplexer. LOW ON RESISTANCE : 125 (Typ.) OVER 15V p-p SIGNAL INPUT RANGE FOR VDD - VSS = 15V HIGH OFF RESISTANCE : CHANNEL LEAKAGE OF 10pA (Typ.) at VDD - VSS = 10V MATCHED SWITCH CHARACTERISTICS : RON = 5 (Typ.) FOR VDD - VSS =15V VERY LOW QUIESCENT POWER DISSIPATION UNDER A DIGITAL CONTROL INPUT AND SUPPLY CONDITIONS : 0.2µW (Typ.) at VDD - VSS = 10V BINARY.

HD74AC283 : Adders. Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips.

IDT74LVC16823A : CMOS/BiCMOS->LVC/ALVC/VCX Family->Low Voltage. 3.3v CMOS 18-bit Register With 3-state Outputs, 5v Tolerant I/o.

IDT74LVC16841A : CMOS/BiCMOS->LVC/ALVC/VCX Family->Low Voltage. 3.3v CMOS Low Voltage 20-bit Transparent Latch With 3-state Outputs, 5v Tolerant I/o.

MC10EP89D : Coax Drivers. 3.3V / 5V Ecl Coaxial Cable Driver , Package: Soic, Pins=8.

MC74HC173AD : Quad 3-state D Flip-flop With Common Clock And Reset. Quad 3-State D Flip-Flop with Common Clock and Reset The MC74HC173A is identical in pinout to the LS173. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. Data, when enabled, are clocked into the four D flip­flops with the rising edge of the common Clock. When either or both of the Output.

SN74ABT245B : Bus Oriented Circuits. Octal Bus Transceivers With 3-state Outputs. Typical VOLP (Output Ground Bounce) V at VCC = 25°C Ioff and Power-Up 3-State Support Hot Insertion High-Drive Outputs (­32-mA IOH, 64-mA IOL) Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD 17 ESD Protection Exceeds JESD ­ 2000-V Human-Body Model ­ 200-V Machine Model (A115-A) These octal bus transceivers are designed for asynchronous communication.

SN74LS194A : Bipolar->LS Family. 4-bit Bidirectional Universal Shift Register.

SN74LV138 : CMOS/BiCMOS->LV/LVQ/LVX Family->Low Voltage. 3-line to 8-line Decoder/demultiplexer.

SN74LV4066ADB : Quadruple Bilateral Analog Switches. EPIC TM (Enhanced-Performance Implanted CMOS) Process High On-Off Output-Voltage Ratio Low Crosstalk Between Switches Individual Switch Controls Extremely Low Input Current ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model = 200 pF, = 0) Package Options Include Plastic Small-Outline (D, NS), Shrink Small-Outline.

SN74LVT16500 : Bus Oriented Circuits. 3.3v Abt 18-bit Universal Bus Transceiver With 3-state Outputs.

TC74LVX138FN : TC74LVX Series. Function = 3-to-8 Line Decoder ;; Pins = 16 ;; Additional Information = More Info.

A1415A-2PLG84B : FPGA, 200 CLBS, 1500 GATES, 110 MHz, PQCC84. s: System Gates: 1500 ; Logic Cells / Logic Blocks: 200 ; Package Type: Other, PLASTIC, MS-007-AE, LCC-84 ; Logic Family: CMOS ; Pins: 84 ; Internal Frequency: 110 MHz ; Operating Temperature: -55 to 125 C (-67 to 257 F) ; Supply Voltage: 5V.

 
0-C     D-L     M-R     S-Z