Digchip : Database on electronics components
Electronics components database



Details, datasheet, quote on part number: TL084C
 
 
Part numberTL084C
CategoryAnalog & Mixed-Signal Processing => Amplifiers => Operational Amplifiers => General Purpose => Quad
DescriptionJFET Input Operational Amplifier
CompanyON Semiconductor
DatasheetDownload TL084C datasheet
 


 
Specifications, Features, Applications

These low­cost JFET input operational amplifiers combine two state­of­ the­art linear technologies on a single monolithic integrated circuit. Each internally compensated operational amplifier has well matched high voltage JFET input devices for low input offset voltage. The BIFET technology provides wide bandwidths and fast slew rates with low input bias currents, input offset currents, and supply currents. These devices are available in single, dual and quad operational amplifiers which are pin­compatible with the industry standard MC1741, MC1458, and the MC3403/LM324 bipolar products.· Input Offset Voltage Options 6.0 mV and 15 mV Max

Low Input Bias Current: 30 pA Low Input Offset Current: 5.0 pA Wide Gain Bandwidth: 4.0 MHz High Slew Rate: 13 V/µs Low Supply Current: 1.4 mA per Amplifier High Input Impedance: 1012

Op Amp Function Single Device TL081ACP TL082CD Dual Quad TL082ACP TL084CN, ACN Operating Temperature Range to +70°C Package SO­8 Plastic DIP SO­8 Plastic DIP Plastic DIP

Rating Supply Voltage Differential Input Voltage Input Voltage Range (Note 1) Output Short Circuit Duration (Note 2) Power Dissipation Plastic Package (N, P) Derate above = +47°C Operating Ambient Temperature Range Storage Temperature Range 1/JA TA Tstg +150 mW mW/°C °C Symbol VCC VEE VID VIDR tSC Value Continuous Unit V

NOTES: 1. The magnitude of the input voltage must not exceed the magnitude of the supply voltage 15 V, whichever is less. 2. The output may be shorted to ground or either supply. Temperature and/or supply voltages must be limited to ensure that power dissipation ratings are not exceeded. 3. ESD data available upon request.

ELECTRICAL CHARACTERISTICS (VCC 15 V, VEE TA = Tlow to Thigh [Note 1].)

Characteristics Input Offset Voltage (RS 10 k, VCM TL084C TL08_AC Input Offset Current (VCM = 0) (Note TL08_C TL08_AC Input Bias Current (VCM = 0) (Note TL08_C TL08_AC Large­Signal Voltage Gain (VO= ±10 V,RL TL08_C TL08_AC Output Voltage Swing (Peak­to­Peak) (RL 10 k) (RL 2.0 k) Symbol VIO ­ IIO ­ IIB ­ AVOL VO V V/mV nA Min Typ Max Unit mV

NOTES: 1. Tlow = 0°C for TL081AC,C Thigh = 70°C for TL081AC 0°C for TL082AC,C +70°C for TL082AC,C 0°C for TL084AC,C +70°C for TL084AC,C 2. Input Bias currents of JFET input op amps approximately double for every 10°C rise in Junction Temperature as shown in Figure 3. To maintain junction temperature as close to ambient temperature as possible, pulse techniques must be used during testing.

ELECTRICAL CHARACTERISTICS (VCC 15 V, VEE = 25°C, unless otherwise noted.)

Characteristics Input Offset Voltage (RS 10 k, VCM TL084C TL08_AC Average Temperature Coefficient of Input Offset Voltage TA = Tlow to Thigh (Note 1) Input Offset Current (VCM = 0) (Note TL08_C TL08_AC Input Bias Current (VCM = 0) (Note TL08_C TL08_AC Input Resistance Common Mode Input Voltage Range TL08_C TL08_AC Large Signal Voltage Gain (VO TL08_C TL08_AC Output Voltage Swing (Peak­to­Peak) (RL 10 k) Common Mode Rejection Ratio (RS TL08_C TL08_AC Supply Voltage Rejection Ratio (RS TL08_C TL08_AC Supply Current (Each Amplifier) Unity Gain Bandwidth Slew Rate (See Figure 1) Vin 100 pF Rise Time (See Figure 1) Overshoot (Vin = 20 mV, = 100 pF) Equivalent Input Noise Voltage 1000 Hz Channel Separation = 100 Symbol VIO ­ VIO/T IIO ­ IIB ­ ri VICR VO CMRR 70 80 PSRR CS mA MHz V/µs µs % nV/ Hz dB V/mV V pA µV/°C pA Min Typ Max Unit mV




Related products with the same datasheet
TL081A   TL081AC   TL081ACDR2   TL081ACP   TL081C   TL081CD  
TL081CDR2   TL082   TL082A   TL082AC   TL082ACP   TL082C  


Some Part number from the same manufacture ON Semiconductor
TL084CN JFET Input Operational Amplifier
TL431 Programmable Precision Reference
TL431A
TL431ACD Adjustable 2.5-36V ±1% Tolerance 1-100mA Shunt Regulator, Ta= -40 to +125°C, Qualified For Automotive Applications, Package: Micro-8, Pins=8
TL431AI Programmable Precision Reference
TL431AID Programmable Precision Reference , Package: Soic, Pins=8
TL431ASeries Programmable Precision Reference
TL431BCD Adjustable 2.5-36V ±1% Tolerance 1-100mA Shunt Regulator, Ta= -40 to +125°C, Qualified For Automotive Applications, Package: Micro-8, Pins=8
TL431BI Programmable Precision Reference
TL431BID Programmable Precision Reference , Package: Soic, Pins=8
TL431BSeries Programmable Precision Reference
TL431BVD Adjustable 2.5-36V ±1% Tolerance 1-100mA Shunt Regulator, Ta= -40 to +125°C, Qualified For Automotive Applications, Package: Micro-8, Pins=8
TL431C Programmable Precision Reference
TL431CD Adjustable 2.5-36V ±1% Tolerance 1-100mA Shunt Regulator, Ta= -40 to +125°C, Qualified For Automotive Applications, Package: Micro-8, Pins=8
TL431CDM Programmable Precision References
TL431CDMR2 Adjustable 2.5-36V ±1% Tolerance 1-100mA Shunt Regulator, Ta= -40 to +125°C, Qualified For Automotive Applications, Package: Micro-8, Pins=8
TL431I Programmable Precision Reference
TL431ID Programmable Precision Reference , Package: Soic, Pins=8
TL431IDM Programmable Precision References
TL431IDMR2 Adjustable 2.5-36V ±1% Tolerance 1-100mA Shunt Regulator, Ta= -40 to +125°C, Qualified For Automotive Applications, Package: Micro-8, Pins=8
TL431IDR2 Programmable Precision Reference , Package: Soic, Pins=8