|Category||Discrete => Diodes & Rectifiers => Zener Diodes|
|Company||Pan Jit International Inc.|
|Datasheet||Download 1N4733A datasheet
|Cross ref.||Similar parts: DFLZ5V1, HZ12BP, HZ13BP, 1N5338BRLG, 1N4733, 1N4733ARL, 1N4733B, 1N4733RL, 1N5918B|
|GLASS PASSIVATED JUNCTION SILICON ZENER DIODE VOLTAGE
Built-in strain relief Low inductance High temperature soldering 260°C /10 seconds at terminals Plastic package has Underwriters Laboratory Flammability Classification 94V-O
Case: Molded Glass DO-41G / Molded plastic DO-41 Epoxy:UL 94V-O rate flame retardant Terminals: Axial leads, solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes positive end Mounting position:Any Weight: 0.012 ounce, 0.3 gram Ordering information : Suffix " to order Molded Glass Package Suffix " to order Molded plastic Package Packing information - 1K per Bulk box Note :This outline drawing is model plastics. Its appearance size same as glass.
Ratings at 25°C ambient temperature unless otherwise specified.
Parameter Power Dissipation at Tamb = 25 Junction Temperature Storage Temperature Range
*Valid provided that leads at a distance of 10mm from case are kept at ambient temperature.
Parameter Thermal Resi stance Juncti on to Ambi ent Ai r Forward Voltage = 200mA
*Vali d provi ded that leads a di stance of 10mm from case are kept at ambi ent temperature.
NOTE: 1. Tolerance and Type Number Designation. The type umbers listed have a standard tolerance on the nominal zener voltage 5% 2. Specials Available Include: A. Nominal zener voltages between the voltages shown and tighter voltage tolerances. B. Matched sets. 3. Zener Voltage (Vz) Measurement. Guarantees the zener voltage when measured at 90 seconds while maintaining o the lead temperature 1 C, from the diode body. 4. Zener Impedance (Zz) Derivation. The zener impedance is derived from the 60 cycle ac voltage, which results when an ac current having an rms value equal 10% of the dc zener current (Izt or Izk) is superimposed on Izt or Izk. 5. Surge Current (Ir) Non-Repetitive. The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2
FIGURE.2 TEMPERATURE COEFICIENTS +150 C TEMPERATURE RANGE; 90% OF THE UNITS ARE IN THE RANGES INDICATED.)
|Related products with the same datasheet|
|Some Part number from the same manufacture Pan Jit International Inc.|