Details, datasheet, quote on part number: 2SA0720A
Part2SA0720A
CategoryDiscrete => Transistors => Bipolar => General Purpose
DescriptionV<SUB>CEO</SUB>(V) = -70 ;; I<SUB>C</SUB>(A) = -0.5 ;; HFE(min) = 85 ;; HFE(max) = 240 ;; Package = TO-92-A1TO-92-B1
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload 2SA0720A datasheet
  

 

Features, Applications

High collector-emitter voltage (Base open) VCEO Optimum for the driver stage of a low-frequency and 30 W output amplifier

Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Emitter-base voltage (Collector open) Collector current Peak collector current Collector power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Rating to +150 Unit V

Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Emitter-base voltage (Collector open) Collector-base cutoff current (Emitter open) Forward current transfer ratio *1

Symbol VCBO VCEO VEBO ICBO *2 hFE2 VCE(sat) VBE(sat) fT Cob
Collector-emitter saturation voltage Base-emitter saturation voltage *1 Transition frequency
Collector output capacitance (Common base, input open circuited)

Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *1: Pulse measurment *2: Rank classification Rank to 240

Note) The part number in the parenthesis shows conventional part number.


Collector output capacitance C (pF) (Common base, input open circuited) ob

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.


 

Related products with the same datasheet
2SA0720A2SA720A
2SA720A
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
2SA0720A2SA720A VCEO(V) = -70 ;; IC(A) = -0.5 ;; HFE(min) = 85 ;; HFE(max) = 240 ;; Package = TO-92-A1TO-92-B1
2SA0777 VCEO(V) = -80 ;; IC(A) = -0.5 ;; HFE(min) = 90 ;; HFE(max) = 220 ;; Package = TO-92L-A1
2SA0794 VCEO(V) = -100 ;; IC(A) = -0.5 ;; HFE(min) = 90 ;; HFE(max) = 220 ;; Package = TO-126B-A1
2SA0838 VCEO(V) = -20 ;; IC(A) = -0.03 ;; HFE(min) = 70 ;; HFE(max) = 220 ;; Package = TO-92-A1TO-92-B1
2SA0879 VCEO(V) = -200 ;; IC(A) = -0.7 ;; HFE(min) = 60 ;; HFE(max) = 220 ;; Package = TO-92L-A1
2SA0885 VCEO(V) = -35 ;; IC(A) = -1 ;; HFE(min) = 85 ;; HFE(max) = 340 ;; Package = TO-126B-A1
2SA0886 VCEO(V) = -40 ;; IC(A) = -1.5 ;; HFE(min) = 80 ;; HFE(max) = 220 ;; Package = TO-126B-A1
2SA0900 VCEO(V) = -18 ;; IC(A) = -1 ;; HFE(min) = 130 ;; HFE(max) = 280 ;; Package = TO-126B-A1
2SA0914 VCEO(V) = -150 ;; IC(A) = -50 ;; HFE(min) = 130 ;; HFE(max) = 330 ;; Package = TO-126B-A1
2SA0921 VCEO(V) = -120 ;; IC(A) = -0.02 ;; HFE(min) = 180 ;; HFE(max) = 700 ;; Package = TO-92-A1TO-92-B1
2SA0963 VCEO(V) = -40 ;; IC(A) = -1.5 ;; HFE(min) = 80 ;; HFE(max) = 220 ;; Package = TO-126B-A1
2SA1018 VCEO(V) = -200 ;; IC(A) = -0.07 ;; HFE(min) = 60 ;; HFE(max) = 220 ;; Package = TO-92-A1TO-92-B1
2SA1022 VCEO(V) = -20 ;; IC(A) = -0.03 ;; HFE(min) = 70 ;; HFE(max) = 220 ;; Package = Mini3-G1
2SA1034 VCEO(V) = -35 ;; IC(A) = -0.05 ;; HFE(min) = 180 ;; HFE(max) = 700 ;; Package = Mini3-G1
2SA1096 VCEO(V) = -50 ;; IC(A) = -2 ;; HFE(min) = 80 ;; HFE(max) = 220 ;; Package = TO-126B-A1
2SA1123 VCEO(V) = -150 ;; IC(A) = -0.05 ;; HFE(min) = 130 ;; HFE(max) = 450 ;; Package = TO-92-A1TO-92-B1
2SA1124
2SA1127 VCEO(V) = -55 ;; IC(A) = -0.1 ;; HFE(min) = 180 ;; HFE(max) = 700 ;; Package = TO-92-A1TO-92-B1
2SA1128 VCEO(V) = -20 ;; IC(A) = -0.5 ;; HFE(min) = 90 ;; HFE(max) = 220 ;; Package = TO-92-A1TO-92-B1
2SA1254 VCEO(V) = -20 ;; IC(A) = -0.03 ;; HFE(min) = 70 ;; HFE(max) = 220 ;; Package = M-A1
2SA1309A VCEO(V) = -50 ;; IC(A) = -0.1 ;; HFE(min) = 160 ;; HFE(max) = 460 ;; Package = NS-A1NS-B1

EEV-EB2W4R7SQ : 4.7µF Aluminum Capacitor Radial, Can - SMD 450V; CAP ALUM 4.7UF 450V 20% SMD Specifications: Capacitance: 4.7µF ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 2000 Hrs @ 105°C ; Size / Dimension: 0.492" Dia (12.50mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.532" L x 0.532" W (13.50mm x 13.50mm) ; Mounting Type: Surface Mount ; P

CX-441 : PHOTOELECTRIC SENSOR, 2MM TO 50MM, NPN Specifications: No. of Channels: - ; Peak Wavelength: - ; Forward Current If(AV): - ; Sensing Range: 2mm to 50mm ; Output Current: 100mA ; Optocoupler Output Type: - ; Sensor Output: NPN ; Input Current: - ; Output Voltage: - ; Supply Voltage Range DC: 12V to 24V ; Viewing Angle: - ; Opto Case Style

ECH-S1472JZ : 4700pF Film Capacitor Radial; CAP FILM 4700PF 100VDC RADIAL Specifications: Capacitance: 4700pF ; Tolerance: ±5% ; Dielectric Material: Polyphenylene Sulphide (PPS) ; Package / Case: Radial ; Packaging: Bulk ; Lead Spacing: 0.197" (5.00mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; Features: General Purpose ; Lead Free Status: Le

ELJ-PB560KF : Fixed Inductors, Coils, Choke 56µH 190mA 1812 (4532 Metric) -; INDUCTOR 56UH 10% 1812 SMD Specifications: Inductance: 56µH ; Tolerance: ±10% ; Package / Case: 1812 (4532 Metric) ; Packaging: Cut Tape (CT) ; Type: - ; Current: 190mA ; Mounting Type: Surface Mount ; Q @ Freq: 10 @ 2.52MHz ; Frequency - Self Resonant: 8MHz ; DC Resistance (DCR): 2.2 Ohm Max ; Shielding: Unshielded ; Applica

ERJ-1GEJ753C : 75K Ohm 0.05W, 1/20W Chip Resistor - Surface Mount; RES 75K OHM 1/20W 5% 0201 SMD Specifications: Resistance (Ohms): 75K ; Power (Watts): 0.05W, 1/20W ; Tolerance: ±5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: -100/ +600ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-S03F6341V : 6.34K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES ANTI-SULFUR 6.34KOHM 1% 0603 Specifications: Resistance (Ohms): 6.34K ; Power (Watts): 0.1W, 1/10W ; Tolerance: ±1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERA-6AEB3243V : 324K Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 324K OHM 1/8W .1% 0805 SMD Specifications: Resistance (Ohms): 324K ; Power (Watts): 0.125W, 1/8W ; Tolerance: ±0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: ±25ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

UP0411100L : Transistor (bjt) - Arrays, Pre-biased Discrete Semiconductor Product 100mA 50V 125mW 2 PNP - Pre-Biased (Dual); TRANS ARRAY PNP/PNP SS MINI-6P Specifications: Transistor Type: 2 PNP - Pre-Biased (Dual) ; Voltage - Collector Emitter Breakdown (Max): 50V ; Current - Collector (Ic) (Max): 100mA ; Power - Max: 125mW ; Resistor - Base (R1) (Ohms): 10K ; Resistor - Emitter Base (R2) (Ohms): 10K ; Vce Saturation (Max) @ Ib, Ic: 250mV @ 300µA, 10m

DSC5A01R0L : Transistor (bjt) - Single Discrete Semiconductor Product 50mA 40V 150mW NPN; TRANS NPN 40V 50MA SMINI3 Specifications: Transistor Type: NPN ; Voltage - Collector Emitter Breakdown (Max): 40V ; Current - Collector (Ic) (Max): 50mA ; Power - Max: 150mW ; DC Current Gain (hFE) (Min) @ Ic, Vce: 400 @ 2mA, 10V ; Vce Saturation (Max) @ Ib, Ic: 200mV @ 1mA, 10mA ; Frequency - Transition: 150MHz ; Current -

DSC5G03 : VHF BAND, Si, NPN, RF SMALL SIGNAL TRANSISTOR Specifications: Polarity: NPN ; Package Type: HALOGEN FREE AND ROHS COMPLIANT, SMINI3-F2-B, 3 PIN ; Number of units in IC: 1 ; Operating Frequency: 800 MHz

DZ2J030M0L : 3 V, 0.2 W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE Specifications: Diode Type: VOLTAGE REGULATOR DIODE ; RoHS Compliant: RoHS

UNR511ES : 100 mA, 50 V, PNP, Si, SMALL SIGNAL TRANSISTOR Specifications: Polarity: PNP ; Package Type: SMINI3-G1, SC-70, 3 PIN

Same catergory

2N4401ZL1 : General Purpose Transistor Npn, Package: TO-92 (TO-226), Pins=3. Rating Collector­Emitter Voltage Collector­Base Voltage Emitter­Base Voltage Collector Current Continuous Total Device Dissipation = 25°C Derate above 25°C Total Device Dissipation = 25°C Derate above 25°C Operating and Storage Junction Temperature Range Symbol VCEO VCBO VEBO IC PD TJ, Tstg Value to +150 Unit Vdc mAdc mW mW/°C Watts mW/°C °C Characteristic.

FQP3N30 : 300V N-channel QFET.

FZT603 : NPN Darlington Transistor. SOT223 NPN SILICON PLANAR MEDIUM POWER DARLINGTON TRANSISTOR ISSUE 3 NOVEMBER 1995 * 2A continuous current * Useful hFE 6A * Fast Switching PARTMARKING DETAIL DEVICE TYPE IN FULL C PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Peak Pulse Current Continuous Collector Current Power Dissipation Operating and Storage Temperature.

MMBD4448 : Small Signal Switching Diodes.

MTY16N80E : N-channel Enhancement-mode Silicon Gate. TM Data Sheet TMOS E-FET.TM Power Field Effect Transistor This high voltage MOSFET uses an advanced termination scheme to provide enhanced voltage­blocking capability without degrading performance over time. In addition, this advanced TMOS E­FET is designed to withstand high energy in the avalanche and commutation modes. Designed for high voltage, high.

NE461M02 : Amplifier. NPN Epitaxial Silicon Transistor High Frequency Low Distortion Amplifier.

STD12NF06L : Low Voltage. N-channel 60V - 0.08 Ohm - 12A Ipak/dpak StripFET ii Power MOSFET.

05U1 : 0.5 A, 50 V, SILICON, SIGNAL DIODE. s: Package: ROHS COMPLIANT, PLASTIC PACKAGE-2 ; Number of Diodes: 1 ; IF: 500 mA ; RoHS Compliant: RoHS.

BFC246804106 : CAPACITOR, METALLIZED FILM, POLYESTER, 100 V, 10 uF, THROUGH HOLE MOUNT. s: Configuration / Form Factor: Leaded Capacitor ; Technology: Film Capacitors ; Applications: General Purpose ; Electrostatic Capacitors: Polyester ; RoHS Compliant: Yes ; Capacitance Range: 10 microF ; Capacitance Tolerance: 10 (+/- %) ; WVDC: 100 volts ; Mounting Style: Through.

CRF73-2A : RESISTOR, METAL FILM, 0.1 W, 0.1; 0.25; 0.5; 1 %, 25; 50 ppm, 10 ohm - 100000 ohm, SURFACE MOUNT, 0805. s: Category / Application: General Use ; Technology / Construction: MetalFilm ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), 0805, CHIP ; Operating DC Voltage: 75 volts ; Operating Temperature: -55 to 70 C (-67 to 158 F).

MTE06P12K : CAPACITOR, METALLIZED FILM, POLYESTER, 60 V, 0.12 uF, THROUGH HOLE MOUNT. s: Configuration / Form Factor: Leaded Capacitor ; Technology: Film Capacitors ; Applications: General Purpose ; Electrostatic Capacitors: Polyester ; Capacitance Range: 0.1200 microF ; Capacitance Tolerance: 10 (+/- %) ; WVDC: 60 volts ; Mounting Style: Through Hole ; Operating.

P600S-LF : 6 A, 1200 V, SILICON, RECTIFIER DIODE. s: Package: ROHS COMPLIANT, PLASTIC, P-600, 2 PIN ; Number of Diodes: 1 ; VRRM: 1200 volts ; IF: 6000 mA.

WSL36375L400DTA : RESISTOR, CURRENT SENSE, METAL STRIP, 3 W, 0.5 %, 50 ppm, 0.0054 ohm, SURFACE MOUNT, 3637. s: Category / Application: Current Sensing, General Use ; Technology / Construction: METAL STRIP ; Mounting / Packaging: Surface Mount Technology (SMT / SMD), CHIP ; Resistance Range: 0.0054 ohms ; Tolerance: 0.5000 +/- % ; Temperature Coefficient: 50 Ā±ppm/Ā°C.

207A100K0T : RESISTOR, WIRE WOUND, 0.5 W, 0.01 %, 10 ppm, 100000 ohm, THROUGH HOLE MOUNT. s: Category / Application: General Use ; Technology / Construction: Wirewound ; Mounting / Packaging: ThroughHole, Axial Leads, AXIAL LEADED ; Resistance Range: 100000 ohms ; Tolerance: 0.0100 +/- % ; Temperature Coefficient: 10 Ā±ppm/Ā°C ; Power Rating: 0.5000 watts (6.70E-4.

 
0-C     D-L     M-R     S-Z