Details, datasheet, quote on part number: 2SA0838
Part2SA0838
CategoryDiscrete => Transistors => Bipolar => General Purpose => High-Frequency Amplifiers
TitleHigh-Frequency Amplifiers
DescriptionV<SUB>CEO</SUB>(V) = -20 ;; I<SUB>C</SUB>(A) = -0.03 ;; HFE(min) = 70 ;; HFE(max) = 220 ;; Package = TO-92-A1TO-92-B1
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload 2SA0838 datasheet
  

 

Features, Applications

Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Emitter-base voltage (Collector open) Collector current Collector power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO PC Tj Tstg Rating to +150 Unit mW C

Parameter Base-emitter saturation voltage Collector-base cutoff current (Emitter open) Collector-emitter cutoff current (Base open) Emitter-base cutoff current (Collector open) Forward current transfer ratio

Collector-emitter saturation voltage Transition frequency Noise figure Reverse transfer impedance Reverse transfer capacitance (Common-emitter)

Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. Rank classification Rank hFE to 220

Note) The part number in the parenthesis shows conventional part number.

Collector output capacitance C (pF) (Common base, input open circuited) ob


Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.


 

Related products with the same datasheet
2SA08382SA838
2SA838
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
2SA08382SA838 VCEO(V) = -20 ;; IC(A) = -0.03 ;; HFE(min) = 70 ;; HFE(max) = 220 ;; Package = TO-92-A1TO-92-B1
2SA0879 VCEO(V) = -200 ;; IC(A) = -0.7 ;; HFE(min) = 60 ;; HFE(max) = 220 ;; Package = TO-92L-A1
2SA0885 VCEO(V) = -35 ;; IC(A) = -1 ;; HFE(min) = 85 ;; HFE(max) = 340 ;; Package = TO-126B-A1
2SA0886 VCEO(V) = -40 ;; IC(A) = -1.5 ;; HFE(min) = 80 ;; HFE(max) = 220 ;; Package = TO-126B-A1
2SA0900 VCEO(V) = -18 ;; IC(A) = -1 ;; HFE(min) = 130 ;; HFE(max) = 280 ;; Package = TO-126B-A1
2SA0914 VCEO(V) = -150 ;; IC(A) = -50 ;; HFE(min) = 130 ;; HFE(max) = 330 ;; Package = TO-126B-A1
2SA0921 VCEO(V) = -120 ;; IC(A) = -0.02 ;; HFE(min) = 180 ;; HFE(max) = 700 ;; Package = TO-92-A1TO-92-B1
2SA0963 VCEO(V) = -40 ;; IC(A) = -1.5 ;; HFE(min) = 80 ;; HFE(max) = 220 ;; Package = TO-126B-A1
2SA1018 VCEO(V) = -200 ;; IC(A) = -0.07 ;; HFE(min) = 60 ;; HFE(max) = 220 ;; Package = TO-92-A1TO-92-B1
2SA1022 VCEO(V) = -20 ;; IC(A) = -0.03 ;; HFE(min) = 70 ;; HFE(max) = 220 ;; Package = Mini3-G1
2SA1034 VCEO(V) = -35 ;; IC(A) = -0.05 ;; HFE(min) = 180 ;; HFE(max) = 700 ;; Package = Mini3-G1
2SA1096 VCEO(V) = -50 ;; IC(A) = -2 ;; HFE(min) = 80 ;; HFE(max) = 220 ;; Package = TO-126B-A1
2SA1123 VCEO(V) = -150 ;; IC(A) = -0.05 ;; HFE(min) = 130 ;; HFE(max) = 450 ;; Package = TO-92-A1TO-92-B1
2SA1124
2SA1127 VCEO(V) = -55 ;; IC(A) = -0.1 ;; HFE(min) = 180 ;; HFE(max) = 700 ;; Package = TO-92-A1TO-92-B1
2SA1128 VCEO(V) = -20 ;; IC(A) = -0.5 ;; HFE(min) = 90 ;; HFE(max) = 220 ;; Package = TO-92-A1TO-92-B1
2SA1254 VCEO(V) = -20 ;; IC(A) = -0.03 ;; HFE(min) = 70 ;; HFE(max) = 220 ;; Package = M-A1
2SA1309A VCEO(V) = -50 ;; IC(A) = -0.1 ;; HFE(min) = 160 ;; HFE(max) = 460 ;; Package = NS-A1NS-B1
2SA1310 VCEO(V) = -55 ;; IC(A) = -0.1 ;; HFE(min) = 180 ;; HFE(max) = 700 ;; Package = NS-A1NS-B1
2SA1323 VCEO(V) = -20 ;; IC(A) = -0.03 ;; HFE(min) = 70 ;; HFE(max) = 220 ;; Package = NS-A1NS-B1
2SA1487

LN1461C : Surface Mounting Chip Led

LNJ311G83RA : Surface Mount LEDs

FT-H13-FM2 : PHOLOELECTRIC SENSOR Specifications: Type: Thrubeam ; Sensing Range: - ; Fiber Optic Applications: -

ECW-H20682HV : 6800pF Film Capacitor Radial; CAP FILM 6800PF 2KVDC RADIAL Specifications: Capacitance: 6800pF ; Tolerance: 3% ; Dielectric Material: Polypropylene, Metallized ; Package / Case: Radial ; Packaging: Bulk ; Lead Spacing: 0.787" (20.00mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; Features: High Frequency and High Stability ; Lead

TN2-L2-4.5V : Low Signal Relays - PCB 1A 4.5VDC DPDT 2 COIL LATCHING PCB Specifications: Manufacturer: Panasonic ; Product Category: Low Signal Relays - PCB ; RoHS:  Details ; Contact Form: 2 Form C (DPDT-BM) ; Coil Voltage: 4.5 VDC ; Coil Current: 44.4 mA ; Coil Type: Dual Latching ; Power Consumption: 200 mW ; Contact Carry Current: 1 A ; Termination Style: Solder

ELF-18D850X : 3.4A Common Mode Choke Filter - Power Line; FILTER LINE 5.6MH 3.4A TYPE 850 Specifications: Inductance: 5.6mH ; Impedance: - ; DC Resistance (DCR): - ; Current: 3.4A ; Filter Type: Power Line ; Mounting Type: Through Hole ; Package / Case: Vertical, 4 PC Pin ; Packaging: Bulk ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant

ERJ-8ENF1651V : 1.65K Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 1.65K OHM 1/4W 1% 1206 SMD Specifications: Resistance (Ohms): 1.65K ; Power (Watts): 0.25W, 1/4W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-1GEF1203C : 120K Ohm 0.05W, 1/20W Chip Resistor - Surface Mount; RES 120K OHM 1/20W 1% 0201 SMD Specifications: Resistance (Ohms): 120K ; Power (Watts): 0.05W, 1/20W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-1GEF19R1C : 19.1 Ohm 0.05W, 1/20W Chip Resistor - Surface Mount; RES 19.1 OHM 1/20W 1% 0201 SMD Specifications: Resistance (Ohms): 19.1 ; Power (Watts): 0.05W, 1/20W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

EXB-N8V684JX : Resistor 680K Ohm 31mW 4 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 680K OHM 4 RES 0804 Specifications: Resistance (Ohms): 680K ; Tolerance: 5% ; Power Per Element: 31mW ; Circuit Type: Isolated ; Number of Pins: 8 ; Packaging: Digi-Reel ; Number of Resistors: 4 ; Package / Case: 0804 (2010 Metric), Concave ; Mounting Type: Surface Mount ; Temperature Coefficient: 200ppm/C ; Lead F

ERJ-8GEYK126V : 12M Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RESISTOR 12M OHM 1/4W 10% 1206 Specifications: Resistance (Ohms): 12M ; Power (Watts): 0.25W, 1/4W ; Tolerance: 10% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: -400/ +150ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

EXC-CET101U : 50V 2A Lc Network - Inductor & Capacitor Filter - Low Pass 135MHz; EMI FILTER 100PF 50V SMD Specifications: Package / Case: 1807 (4518 Metric), 3 PC Pad ; Packaging: Digi-Reel ; Attenuation Value: 25dB @ 300MHz ~ 450MHz ; Capacitance: 100pF ; Current: 2A ; Center / Cutoff Frequency: 135MHz ; Filter Type: Low Pass ; Voltage: 50V ; Impedance: - ; Lead Free Status: Lead Free ; RoHS Status: R

Same catergory

2SK2958L : Silicon N-channel MOSFET High Speed Power Switching. Silicon N Channel MOS FET High Speed Power Switching Low on-resistance R DS(on) = 5.5m typ. 4V gate drive devices. High speed switching Item Drain to source voltage Gate to source voltage Drain current Drain peak current Body-drain diode reverse drain current Channel dissipation Channel temperature Storage temperature Note: PW 10 s, duty cycle % 2. Value.

2SK3525-01MR : High voltage. High speed switching Low on-resistance No secondary breadown Low driving power Avalanche-proof Applications Switching regulators UPS (Uninterruptible Power Supply) DC-DC converters Ratings Unit mJ 145.6 kV/s 20 5 kV/s 48 +150 Operating and storage to +150 temperature range C Isolation Voltage 2 kVrms L=4.2mH, Vcc=60V, See to Avalanche Energy Graph.

BCR146 : NPN Silicon Digital Transistor. Symbol VCEO VCBO VEBO Vi(on) IC Ptot Tj Tstg Collector-emitter voltage Collector-base voltage Emitter-base voltage Input on Voltage DC collector current Total power dissipation, 102 C Junction temperature Storage temperature 1For calculation of R thJA please refer to Application Note Thermal Resistance Electrical Characteristics at TA=25C, unless.

D2440 : Relay Solid State 40a 240vac.

FMMT458 : NPN High Voltage Transistor. PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current Peak Pulse Current Base Current Power Dissipation T amb=25C Operating and Storage Temperature Range PARAMETER Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cut-Off Current Collector.

FQD6N15 : 150V N-channel QFET.

PTC4001T : Power. NPN Microwave Power Transistor. Product Supersedes data of November 1994 File under Discrete Semiconductors, SC15 1997 Feb 18 Diffused emitter ballasting resistors providing excellent current sharing and withstanding a high VSWR Interdigitated structure provides high emitter efficiency Gold metallization realizes very good characteristics stability and excellent lifetime Multicell.

SBU6A : . 18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958 VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical < 2%, Max. 10% of Die Area) BUILT-IN STRESS RELIEF MECHANISM FOR SUPERIOR RELIABILITY AND PERFORMANCE SURGE OVERLOAD RATING TO 250 AMPS PEAK IDEAL FOR PRINTED.

TPC8006-H : VDDS = 30 ;; Id = 7 ;; Package Type = SOP-8 (Single N-ch).

03028-BX102AKZJ : CAPACITOR, CERAMIC, MULTILAYER, 50 V, BX, 0.001 uF, SURFACE MOUNT, 0603. s: Configuration / Form Factor: Chip Capacitor ; Technology: Multilayer ; Applications: General Purpose ; Electrostatic Capacitors: Ceramic Composition ; Capacitance Range: 1.00E-3 microF ; Capacitance Tolerance: 10 (+/- %) ; WVDC: 50 volts ; Mounting Style: Surface Mount Technology.

FDS4559D84Z : 4.5 A, 60 V, 0.055 ohm, 2 CHANNEL, N AND P-CHANNEL, Si, POWER, MOSFET. s: Polarity: N-Channel, P-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 60 volts ; rDS(on): 0.0550 ohms ; PD: 2000 milliwatts ; Package Type: SO-8, SO-8 ; Number of units in IC: 2.

IGW30N100T : 60 A, 1000 V, N-CHANNEL IGBT, TO-247AD. s: Polarity: N-Channel ; Package Type: TO-247, GREEN, PLASTIC, TO-247, 3 PIN ; Number of units in IC: 1.

RJK03C5DPA-00-J53 : 50 A, 30 V, 0.0043 ohm, N-CHANNEL, Si, POWER, MOSFET. s: Polarity: N-Channel ; MOSFET Operating Mode: Enhancement ; V(BR)DSS: 30 volts ; rDS(on): 0.0043 ohms ; Package Type: HALOGEN FREE AND LEAD FREE, WPAK(2), 8 PIN ; Number of units in IC: 1.

SID10N30-600I : POWER, FET. Elektronische Bauelemente 7.5A, 300V, RDS(ON) 600 m N-Channel Enhancement MOSFET RoHS Compliant Product A suffix of "-C" specifies halogen & lead-free The miniature surface mount MOSFETs utilize a high cell density trench process to provide Low RDS(on) and to ensure minimal power loss and heat dissipation. Low RDS(on) provides higher efficiency and extends.

SM51524L : DATACOM TRANSFORMER FOR 10/100 BASE-TX; ETHERNET APPLICATION(S). s: Category: Signal ; Other Transformer Types / Applications: Pulse Transformers, DATACOM TRANSFORMER ; Mounting: Chip Transformer ; Operating Temperature: -40 to 85 C (-40 to 185 F).

226AFA016M : CAPACITOR, ALUMINUM ELECTROLYTIC, SOLID POLYMER, POLARIZED, 16 V, 22 uF, SURFACE MOUNT. s: RoHS Compliant: Yes ; : Polarized ; Capacitance Range: 22 microF ; Capacitance Tolerance: 20 (+/- %) ; WVDC: 16 volts ; Leakage Current: 176 microamps ; ESR: 90 milliohms ; Mounting Style: Surface Mount Technology ; Operating Temperature: -55 to 105 C (-67 to 221 F).

85HQ035-G : 85 A, SILICON, RECTIFIER DIODE, DO-203AB. s: Rectifier Configuration / Technology: Schottky ; Package: DO-5, HERMETIC SEALED, DO-5, 1 PIN ; Number of Diodes: 1 ; IF: 85000 mA ; RoHS Compliant: RoHS.

 
0-C     D-L     M-R     S-Z