|
|
Part: AN78L00M
Category:
Power Management
-> Regulators
-> Linear Regulators
-> Positive
Description: 3-pin Positive Output Voltage Regulator 100ma Type
Company: Panasonic Industrial Company/Electronic Components
Datasheet: Download AN78L00M datasheet File size : 68 kB
Request For quote: Find where to buy AN78L00M
Datasheet text preview:
AN78L00/AN78L00M Series
3-pin Positive Output Voltage Regulator (100mA Type)
s Overview
The AN78L00 series is 3-pin fixed positive output type monolithic voltage regulators. A Stabilized fixed output voltage is obtained from an unstable DC input voltage without using any external parts. Eleven types of fixed output voltage are available from 4V through 10V, 12V, 15V, 18V, 20V, and 24V. They can be used widely as power circuits with a current capacitance of up to 100mA.
AN78L00 Series
5.0±0.2 5.1±0.2 4.0±0.2 Unit:mm
0.45 0.1 2.54 2.3±0.2 1:Input 2:Output 3:Common
+ 0.2
s Features
· No external components · Output voltage:4V, 5V, 6V, 7V, 8V, 9V, 10V, 12V, 15V, 18V, 20V, 24V · Internal short-circuit current limiting · Internal thermal overload protection
231 (Bottom View) TO-92 Package (SSIP003-P-0000)
AN78L00M Series
13.5±0.5
Unit:mm
4.6max. 1.8max. 4.25max. 2.6max.
1.6max.
2.6 4.5 0.48max. 0.58max. 1.5 3.0
0.8min.
0.44max.
1:Output 2:Common 3:Input
1
2
3
s Block Diagram
3 1 Pass Tr Q1 Current Source Current Limiter RSC 2 Starter Voltage Reference + Error Amp. R2 Thermal Protection R1 2 3
3-pin SIL Mini Power Type Plastic Package (HSIP003-P-0000B)
Input
1 Output
Pin Number in Pin Number in
are for AN78L00 Series are for AN78L00M Series
Common
s Absolute Maximum Ratings (Ta=25°C)
Parameter Input voltage Power dissipation Operating ambient temperature Storage temperature AN78L00 Series AN78L00M Series Symbol VI PD Topr Tstg Rating 35 *1 40 *2 650 *3 30 to +80 55 to +150 55 to +125 Unit V V mW °C °C
*1 AN78L04/M, AN78L05/M, AN78L06/M, AN78L07/M, AN78L08/M, AN78L09/M, AN78L10/M, AN78L12/M, AN78L15/M *2 AN78L18/M, AN78L20/M, AN78L24/M *3 Follow the derating curve. When Tj exceeds 150°C, the internal circuit shuts off the output. Mounting onto the PCB (20 × 20 × 1.7mm glass epoxy copper foil 1cm2 or more), for AN78L00M Series.
· AN78L04/AN78L04M (4V Type)
Parameter Output voltage Output voltage tolerance Line regulation Load regulation Bias current Input bias current fluctuation Load bias current fluctuation Output noise voltage Ripple rejection ratio Minimum I/O voltage difference Output short-circuit current
s Electrical Characteristics (Ta=25°C)
Symbol VO VO REGIN REGL Ibias Ibias (IN) Ibias (L) Vno RR VDIF (min.) IO (Short) VO/Ta Tj=25°C VI=6.5 to 19V, IO=1 to 70mA VI=6.5 to 19V, Tj=25°C VI=7 to 19V, Tj=25°C IO=1 to 100mA, Tj=25°C IO=1 to 40mA, Tj=25°C Tj=25°C VI=7 to 19V, Tj=25°C IO=1 to 40mA, Tj=25°C f=10Hz to 100kHz VI=7 to 17V, IO=40mA, f=120Hz Tj=25°C Tj=25°C, VI=35V IO=5mA, Tj=0 to 125°C 48 40 58 1.7 140 0.6 Condition min 3.84 3.8 50 40 10 4.5 2 typ 4 max 4.16 4.2 145 95 55 30 3 1 0.1 Unit V V mV mV mV mV mA mA mA µV dB V mA mV/°C
Output voltage temperature cofficient
Note 1) The specified condition Tj=25°C means that the test should be conducted with each test time reducedt (within 10ms) so that the drift in characteristic value due to a temperature rise at chip junction can be innored. Note 2) Unless otherwise specified, VI=9V, IO=40mA, CI=0.33µF, CO=0.1µF, Tj=0 to 125°C (AN78L04) and Tj=0 to 100°C (AN78L04M).
· AN78L05/AN78L05M (5V Type)
Parameter Output voltage Output voltage tolerance Line regulation Load regulation Bias current Input bias current fluctuation Load bias current fluctuation Output noise voltage Ripple rejection ratio Minimum I/O voltage difference Output short-circuit current
s Electrical Characteristics (Ta=25°C)
Symbol VO VO REGIN REGL Ibias Ibias (IN) Ibias (L) Vno RR VDIF (min.) IO (Short) VO/Ta Tj=25°C VI=7.5 to 20V, IO=1 to 70mA VI=7.5 to 20V, Tj=25°C VI=8 to 20V, Tj=25°C IO=1 to 100mA, Tj=25°C IO=1 to 40mA, Tj=25°C Tj=25°C VI=8 to 20V, Tj=25°C IO=1 to 40mA, Tj=25°C f=10Hz to 100kHz VI=8 to 18V, IO=40mA, f=120Hz Tj=25°C Tj=25°C, VI=35V IO=5mA, Tj=0 to 125°C 47 40 57 1.7 140 0.65 Condition min 4.8 4.75 55 45 11 5 2 typ 5 max 5.2 5.25 150 100 60 30 3 1 0.1 Unit V V mV mV mV mV mA mA mA µV dB V mA mV/°C
Output voltage temperature cofficient
Note 1) The specified condition Tj=25°C means that the test should be conducted with each test time reducedt (within 10ms) so that the drift in characteristic value due to a temperature rise at chip junction can be innored. Note 2) Unless otherwise specified, VI=10V, IO=40mA, CI=0.33µF, CO=0.1µF, Tj=0 to 125°C (AN78L05) and Tj=0 to 100°C (AN78L05M).
· AN78L06/AN78L06M (6V Type)
Parameter Output voltage Output voltage tolerance Line regulation Load regulation Bias current Input bias current fluctuation Load bias current fluctuation Output noise voltage Ripple rejection ratio Minimum I/O voltage difference Output short-circuit current Output voltage temperature cofficient Symbol VO VO REGIN REGL Ibias Ibias (IN) Ibias (L) Vno RR VDIF (min.) IO (Short) VO/Ta Tj=25°C VI=8.5 to 21V, IO=1 to 70mA VI=8.5 to 21V, Tj=25°C VI=9 to 21V, Tj=25°C IO=1 to 100mA, Tj=25°C IO=1 to 40mA, Tj=25°C Tj=25°C VI=9 to 21V, Tj=25°C IO=1 to 40mA, Tj=25°C f=10Hz to 100kHz VI=9 to 19V, IO=40mA, f=120Hz Tj=25°C Tj=25°C, VI=35V IO=5mA, Tj=0 to 125°C 46 50 56 1.7 140 0.7 Condition min 5.76 5.7 60 50 12 5.5 2 typ 6 max 6.24 6.3 155 105 65 35 3 1 0.1 Unit V V mV mV mV mV mA mA mA µV dB V mA mV/°C
Note 1) The specified condition Tj=25°C means that the test should be conducted with each test time reducedt (within 10ms) so that the drift in characteristic value due to a temperature rise at chip junction can be innored. Note 2) Unless otherwise specified, VI=11V, IO=40mA, CI=0.33µF, CO=0.1µF, Tj=0 to 125°C (AN78L06) and Tj=0 to 100°C (AN78L06M).
s Electrical Characteristics (Ta=25°C)
· AN78L07/AN78L07M (7V Type)
Parameter Output voltage Output voltage tolerance Line regulation Load regulation Bias current Input bias current fluctuation Load bias current fluctuation Output noise voltage Ripple rejection ratio Minimum I/O voltage difference Output short-circuit current
Symbol VO VO REGIN REGL Ibias Ibias (IN) Ibias (L) Vno RR VDIF (min.) IO (Short) VO/Ta Tj=25°C
Condition VI=9.5 to 22V, IO=1 to 70mA VI=9.5 to 22V, Tj=25°C VI=10 to 22V, Tj=25°C IO=1 to 100mA, Tj=25°C IO=1 to 40mA, Tj=25°C Tj=25°C VI=10 to 22V, Tj=25°C IO=1 to 40mA, Tj=25°C f=10Hz to 100kHz VI=10 to 20V, IO=40mA, f=120Hz Tj=25°C Tj=25°C, VI=35V IO=5mA, Tj=0 to 125°C
min 6.72 6.65
typ 7 70 60 13 6 2
max 7.28 7.35 165 115 75 35 3 1 0.1
Unit V V mV mV mV mV mA mA mA µV dB V mA mV/°C
50 45 55 1.7 140 0.75
Output voltage temperature cofficient
Note 1) The specified condition Tj=25°C means that the test should be conducted with each test time reducedt (within 10ms) so that the drift in characteristic value due to a temperature rise at chip junction can be innored. Note 2) Unless otherwise specified, VI=12V, IO=40mA, CI=0.33µF, CO=0.1µF, Tj=0 to 125°C (AN78L07) and Tj=0 to 100°C (AN78L07M).
· AN78L08/AN78L08M (8V Type)
Parameter Output voltage Output voltage tolerance Line regulation Load regulation Bias current Input bias current fluctuation Load bias current fluctuation Output noise voltage Ripple rejection ratio Minimum I/O voltage difference Output short-circuit current Output voltage temperature cofficient Symbol VO VO REGIN REGL Ibias Ibias (IN) Ibias (L) Vno RR VDIF (min.) IO (Short) VO/Ta Tj=25°C VI=10.5 to 23V, IO=1 to 70mA VI=10.5 to 23V, Tj=25°C VI=11 to 23V, Tj=25°C IO=1 to 100mA, Tj=25°C IO=1 to 40mA, Tj=25°C Tj=25°C VI=11 to 23V, Tj=25°C IO=1 to 40mA, Tj=25°C f=10Hz to 100kHz VI=11 to 21V, IO=40mA, f=120Hz Tj=25°C Tj=25°C, VI=35V IO=5mA, Tj=0 to 125°C 44 60 54 1.7 140 0.8 Condition min 7.7 7.6 80 70 15 7 2 typ 8 max 8.3 8.4 175 125 80 40 3 1 0.1 Unit V V mV mV mV mV mA mA mA µV dB V mA mV/°C
Note 1) The specified condition Tj=25°C means that the test should be conducted with each test time reducedt (within 10ms) so that the drift in characteristic value due to a temperature rise at chip junction can be innored. Note 2) Unless otherwise specified, VI=14V, IO=40mA, CI=0.33µF, CO=0.1µF, Tj=0 to 125°C (AN78L08) and Tj=0 to 100°C (AN78L08M).
· AN78L09/AN78L09M (9V Type)
Parameter Output voltage Output voltage tolerance Line regulation Load regulation Bias current Input bias current fluctuation Load bias current fluctuation Output noise voltage Ripple rejection ratio Minimum I/O voltage difference Output short-circuit current
s Electrical Characteristics (Ta=25°C)
Symbol VO VO REGIN REGL Ibias Ibias (IN) Ibias (L) Vno RR VDIF (min.) IO (Short) VO/Ta Tj=25°C VI=11.5 to 24V, IO=1 to 70mA VI=11.5 to 24V, Tj=25°C VI=12 to 24V, Tj=25°C IO=1 to 100mA, Tj=25°C IO=1 to 40mA, Tj=25°C Tj=25°C VI=12 to 24V, Tj=25°C IO=1 to 40mA, Tj=25°C f=10Hz to 100kHz VI=12 to 22V, IO=40mA, f=120Hz Tj=25°C Tj=25°C , VI=35V IO=5mA, Tj=0 to 125°C 43 65 53 1.7 140 0.85 Condition min 8.64 8.55 90 80 16 8 2 typ 9 max 9.35 9.45 190 140 85 45 3 1 0.1 Unit V V mV mV mV mV mA mA mA µV dB V mA mV/°C
Output voltage temperature cofficient
Note 1) The specified condition Tj=25°C means that the test should be conducted with each test time reducedt (within 10ms) so that the drift in characteristic value due to a temperature rise at chip junction can be innored. Note 2) Unless otherwise specified, VI=15V, IO=40mA, CI=0.33µF, CO=0.1µF, Tj=0 to 125°C (AN78L09) and Tj=0 to 100°C (AN78L09M).
· AN78L10/AN78L10M (10V Type)
Parameter Output voltage Output voltage tolerance Line regulation Load regulation Bias current Input bias current fluctuation Load bias current fluctuation Output noise voltage Ripple rejection ratio Minimum I/O voltage difference Output short-circuit current Output voltage temperature cofficient Symbol VO VO REGIN REGL Ibias Ibias (IN) Ibias (L) Vno RR VDIF (min.) IO (Short) VO/Ta Tj=25°C VI=12.5 to 25V, IO=1 to 70mA VI=12.5 to 25V, Tj=25°C VI=13 to 25V, Tj=25°C IO=1 to 100mA, Tj=25°C IO=1 to 40mA, Tj=25°C Tj=25°C VI=13 to 25V, Tj=25°C IO=1 to 40mA, Tj=25°C f=10Hz to 100kHz VI=13 to 23V, IO=40mA, f=120Hz Tj=25°C Tj=25°C, VI=35V IO=5mA, Tj=0 to 125°C 42 70 52 1.7 140 0.9 Condition min 9.6 9.5 100 90 17 9 2 typ 10 max 10.4 10.5 210 160 90 45 3 1 0.1 Unit V V mV mV mV mV mA mA mA µV dB V mA mV/°C
Note 1) The specified condition Tj=25°C means that the test should be conducted with each test time reducedt (within 10ms) so that the drift in characteristic value due to a temperature rise at chip junction can be innored. Note 2) Unless otherwise specified, VI=16V, IO=40mA, CI=0.33µF, CO=0.1µF, Tj=0 to 125°C (AN78L10) and Tj=0 to 100°C (AN78L10M).
Others parts begin by an
AN-1 AN-2 AN-3 AN-4 AN-5 AN-6 AN-7 AN-8
|
|
|
