Details, datasheet, quote on part number: AN80M18RSP
PartAN80M18RSP
CategoryPower Management => Regulators => Linear Voltage Regulators => LDO (Low Drop Out) => Low Drop Regulater with standby
TitleLow Drop Regulater with standby
DescriptionV<SUB>CC</SUB>(V) = 14.4 ;; P<SUB>D</SUB>(W) = 0.255 ;; V<SUB>O</SUB>(V) = 1.8 ;; I<SUB>O(Peak)</SUB>(A) = ;; V<SUB>DIF</SUB>(V) = 0.45 ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload AN80M18RSP datasheet
  

 

Features, Applications

5-pin, low dropout voltage regulator with standby function (500 mA type)

The AN80MxxRSP series 0.5 A, low dropout voltage regulator IC with standby function, featuring low current consumption and low noise.

Standby consumption current: max. 3 A Dropout voltage: 0.25 V Output voltage accuracy: 3% 5-pin surface mounting package Ripple rejection ratio: = 500 kHz) Output voltage: 5.3 V

Note) The package of this product will be changed to lead-free type (SP-5SUA). See the new package dimensions section later of this datasheet.

Overcurrent limitter Inrush current protection Thermal protection R2 R1

Pin No. Input voltage pin (VIN) Control pin (Cont.) High: operation, Low: stop Electrically in common with radiation fin Open when the noise reduction function is not used Description

Noise reduction pin (N.R.) Output voltage pin (VOUT)
Parameter Supply voltage Supply current Power dissipation

Note) 1. The output voltage may exceed the rated value 150C in no-load condition. Set Tj is likely to exceed 150C. 2. This IC is not suitable for automobile equipment use. 3. *1: The above power dissipation shows the value of an independent IC without heat sink = 85C. For details, refer to "2. Power dissipation of SP-5SU package" in the Application Notes. *2: Except for the operating ambient temperature and storage temperature, all ratings are for = 25C.

Part No. AN80M52RSP AN80M53RSP Output voltage Operating supply voltage range (VCC) to 14.0 Unit

 

Related products with the same datasheet
AN80M19RSP
AN80M20RSP
AN80M21RSP
AN80M22RSP
AN80M25RSP
AN80M27RSP
AN80M28RSP
AN80M29RSP
AN80M30RSP
AN80M31RSP
AN80M32RSP
AN80M33RSP
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
AN80M19RSP VCC(V) = 14.4 ;; PD(W) = 0.255 ;; VO(V) = 1.8 ;; IO(Peak)(A) = ;; VDIF(V) = 0.45 ;; Package =
AN80P18RSP VCC(V) = 2.3 to 14.0 ;; PD(W) = 0.255 ;; VO(V) = 1.8 ;; IO(Peak)(A) = ;; VDIF(V) = 0.6 ;; Package = SP-5SUA(Pb Free)
AN8124
AN8140K High-speed Low Power Consumption 10-bit D/A Converter
AN8146FBQ 10-Bit 3-channel D/A Converter ic
AN8261 Brushless Motor Driver
AN8267S Fan Motor Driver
AN8353UB Package =
AN8377N 3-channel Linear Driver
AN8387S 2-channel Linear Driver
AN8470NSA Spindle Motor Driver ic For Optical Disk
AN8472SA
AN8473SA Package =
AN8480NSB
AN8481SB
AN8488SB
AN8497SA
AN8523
AN8538SH Single PLL ic For Cellular Phone
AN8539SH 300 Mhz-band Single PLL ic
AN8585

MAZ1140 : Silicon Planer Type Zener Diode

AN7924F : 3-pin Negative Output Voltage Regulators 1A Type

ECA-0JHG103 : 10000F Aluminum Capacitor Radial, Can 6.3V; CAP ALUM 10000UF 6.3V 20% RADIAL Specifications: Capacitance: 10000F ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 2000 Hrs @ 105C ; Size / Dimension: 0.630" Dia (16.00mm) ; Lead Spacing: 0.295" (7.50mm) ; Surface Mount Land Size: - ; Mounting Type: Through Hole ; Package / Case: Radial,

ERJ-2RKF9091X : Thick Film Resistors - SMD 0402 9.09Kohms 1% Tol Specifications: Manufacturer: Panasonic ; RoHS:  Details ; Resistance: 9.09 KOhms ; Tolerance: 1 % ; Power Rating: 100 mWatts ; Temperature Coefficient: 100 PPM / C ; Termination Style: SMD/SMT ; Package / Case: 0402 (1005 metric) ; Packaging: Reel ; Product: Thick Film Resistors SMD

ERA-2AEB1960X : 196 Ohm 0.063W, 1/16W Chip Resistor - Surface Mount; RES 196 OHM 1/16W .1% 0402 SMD Specifications: Resistance (Ohms): 196 ; Power (Watts): 0.063W, 1/16W ; Tolerance: 0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-1GEJ203C : 20K Ohm 0.05W, 1/20W Chip Resistor - Surface Mount; RES 20K OHM 1/20W 5% 0201 SMD Specifications: Resistance (Ohms): 20K ; Power (Watts): 0.05W, 1/20W ; Tolerance: 5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: -100/ +600ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-S08F59R0V : 59 Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES ANTI-SULFUR 59 OHM 1% 1206 Specifications: Resistance (Ohms): 59 ; Power (Watts): 0.25W, 1/4W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-1GNF39R0C : 39 Ohm 0.05W, 1/20W Chip Resistor - Surface Mount; RES 39 OHM 1/20W 1% 0201 SMD Specifications: Resistance (Ohms): 39 ; Power (Watts): 0.05W, 1/20W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ESE11MV2 : SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, 0.01A, 5VDC, SURFACE MOUNT-STRAIGHT Specifications: Actuator Style: Lever Style ; Pole and Throw Specifications: Single Pole, Single Throw (SPST) ; Maximum Current: 0.0100 amps ; Maximum DC Voltage: 5 volts ; Actuating Force: 1.26 oz (0.3500 N) ; Mechanical Life: 50000 nb ; Terminal Type: Solder ; Standards and Certifications: RoHS ;

Same catergory

IP1R19AK-05 : Screening Options Available = ;; Package = TO3 ;; = Voltage Regulator ;; Temperature Range = -55 to +150 C ;; Polarity = Negative ;; Current (A) = 5.0A ;; Input Voltage (V) = 35V ;; Output Voltage (V) = 5V ;; Voltage Drop (typ.) = 2.2V ;; Voltage Drop (max.) = 3V.

KA278R09C : 2A Fixed 9V Low Dropout Voltage Regulator (LDO). 9V, 12V output low dropout voltage regulator TO-220 full-mold package (4pin) Overcurrent protection, thermal shutdown Overvoltage protection, short circuit protection With output disable function The is a low-dropout voltage regulator suitable for various electronic equipments. It provides constant voltage power source with TO-220-4 lead full mold package.

L4977A : Switching DC-DC Regulation. 7A Switching Regulator. 7A OUTPUT CURRENT TO 40V OUTPUT VOLTAGE RANGE TO 90% DUTY CYCLE RANGE INTERNAL FEED-FORWARD LINE REGULATION INTERNAL CURRENT LIMITING PRECISE 2% ON CHIP REFERENCE RESET AND POWER FAIL FUNCTIONS SOFT START INPUT/OUTPUT SYNC PIN UNDER VOLTAGE LOCK OUT WITH HYSTERETIC TURN-ON PWM LATCH FOR SINGLE PULSE PER PERIOD VERY HIGH EFFICIENCY SWITCHING FREQUENCY.

LM4041 : LM4041 - Precision Micropower Shunt Voltage Reference, Package: SOT-23, Pin Nb=3.

LT1242 : High Speed Current Mode Pulse Width Modulators. LT1241 Series High Speed Current Mode Pulse Width Modulators Low Start-Up Current: 250A 50ns Current Sense Delay Current Mode Operation: To 500kHz Pin Compatible with UC1842 Series Undervoltage Lockout with Hysteresis No Cross-Conduction Current Trimmed Bandgap Reference 1A Totem Pole Output Trimmed Oscillator Frequency and Sink Current Active Pull-Down.

MT88E39 : CMOS Calling Number Identification Circuit ( Cnic1.1 ). Calling Number Identification Circuit Advance Information (CNIC1.1) 1200 baud Bell 202 and CCITT V.23 Frequency Shift Keying (FSK) demodulation Compatible with Bellcore SR-TSV-002476, TIA/EIA-716 and ETSI 300 778-1 High input sensitivity Dual mode 3-wire data interface (Serial FSK data stream or MT88E43 compatible 1 byte buffer) Internal gain adjustable.

P18TG-1205Z21M : Power/w = 4 ;; Input/vdc = 9-18/18-36/36-72 ;; Output/vdc = +/-3,3/5/12/15/18Regulated ;; ISOlation = 1500V ;; Package = DIP24M.

TPS2828DBV : MOSFET and Power Drivers. ti TPS2828, Inverting High-speed MOSFET Driver.

TPS61091RSAR : Switching DC/DC Converters, Integrated Switch. ti TPS61091, 3.3-V Output, 500-mA, 96% Efficient Boost Converter, 20uA, QFN-16.

TPS76850 : . 1 A Low-Dropout Voltage Regulator Available 3.3-V, 5.0-V Fixed Output and Adjustable Versions Dropout Voltage Down A (TPS76850) Ultralow 85 A Typical Quiescent Current Fast Transient Response 2% Tolerance Over Specified Conditions for Fixed-Output Versions Open Drain Power Good (See TPS767xx for Power-On Reset With 200-ms Delay Option) 8-Pin SOIC and 20-Pin.

UPC24A00 : Three Terminal Low Dropout Voltage Regulator. The PC24A00 Series is a low dropout voltage three terminal regulator that has realized a minimum voltage differential between the I/O of no more than 1 V when the output current 2 A through the employment of a PNP transistor at the output stage. Due to its ability to achieve a greater reduction in the power loss compared with conventional three-terminal.

ZXRE4041DF : Sot23 Micropower 1.225v Voltage Reference. The is a bandgap circuit designed to achieve a precision micropower voltage reference of 1.225 volts. The device is available in the small outline SOT23 surface mount package which is ideal for applications where space saving is important. SOT23 tolerance is available 0.5% C grade for precision applications. Excellent performance is maintained over.

IRS2540STRPBF : 200V Half Bridge Driver LED Buck Regulator in a 8-Pin SOIC Package. The IRS254(0,1) are high voltage, high frequency buck control ICs for constant LED current regulation. They incorporate a continuous mode time-delayed hysteretic buck regulator to directly control the average load current, using an accurate on-chip bandgap voltage reference. The application is inherently protected against short circuit conditions, with.

ECMF02-2AMX6 : EMI Filtering And Signal Conditioning Common mode filter with ESD protection for USB 2.0 and MIPI D-PHY/MDDI interface.

PT7M7812TTA : P Supervisor Circuits The PT7M7xxx family microprocessor (P) supervisory circuits are targeted to improve reliability and accuracy of power-supply circuitry in P systems. These devices reduce the complexity and number of components required to monitor power-supply and battery functions..

CM2830GOIM89 : 300mA CMOS LDO The CM2830/CM2830A family is a positive voltage linear regulator developed utilizing CMOS technology featured low quiescent current (30 ÂA typ.), low dropout voltage, and high output voltage accuracy. Built-in low on-resistance transistor provides low dropout voltage and large output current. A 2.2 ÂF or greater can be used as an output.

 
0-C     D-L     M-R     S-Z