Details, datasheet, quote on part number: AN80P18RSP
PartAN80P18RSP
CategoryPower Management => Regulators => Linear Voltage Regulators => LDO (Low Drop Out) => Low Drop Regulater with standby
TitleLow Drop Regulater with standby
DescriptionV<SUB>CC</SUB>(V) = 2.3 to 14.0 ;; P<SUB>D</SUB>(W) = 0.255 ;; V<SUB>O</SUB>(V) = 1.8 ;; I<SUB>O(Peak)</SUB>(A) = ;; V<SUB>DIF</SUB>(V) = 0.6 ;; Package = SP-5SUA(Pb Free)
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload AN80P18RSP datasheet
Cross ref.Similar parts: BA18BC0WFP-E2
  

 

Features, Applications

5-pin, low dropout voltage regulator with standby function (1 A type)

The AN80PxxRSP series 1 A, low dropout voltage regulator with standby function, featuring low current consumption and low noise.

Standby consumption current: max. 3 A Dropout voltage: 0.3 V Output voltage accuracy: 3% 5-pin surface mounting package Ripple rejection ratio = 500 kHz) Output voltage: 5.3 V

Note) The package of this product will be changed to lead-free type (SP-5SUA). See the new package dimensions section later of this datasheet.

Overcurrent limitter Inrush current protection Thermal protection R1

Pin No. Input voltage pin (VIN) Control pin (Cont.) High: operation, Low: stop Electrically in common with radiation fin Open when the noise reduction function is not used Description

Noise reduction pin (N.R.) Output voltage pin (VOUT)
Parameter Supply voltage Supply current Power dissipation

Note) 1. The output voltage may exceed the rated value 150C in no-load condition. Set Tj is likely to exceed 150C. 2. This IC is not suitable for automobile equipment use. 3. *1: The above power dissipation shows the value of an independent IC without heat sink = 85C. For details, refer to "2. Power dissipation of SP-5SU package" in the Application Notes. *2: Except for the operating ambient temperature and storage temperature, all ratings are for = 25C.

Part No. AN80P52RSP AN80P53RSP Output voltage Operating supply voltage range (VCC) to 14.0 Unit

 

Related products with the same datasheet
AN80P19RSP
AN80P20RSP
AN80P21RSP
AN80P22RSP
AN80P25RSP
AN80P27RSP
AN80P28RSP
AN80P29RSP
AN80P30RSP
AN80P31RSP
AN80P32RSP
AN80P33RSP
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
AN80P19RSP VCC(V) = 2.3 to 14.0 ;; PD(W) = 0.255 ;; VO(V) = 1.8 ;; IO(Peak)(A) = ;; VDIF(V) = 0.6 ;; Package = SP-5SUA(Pb Free)
AN8124
AN8140K High-speed Low Power Consumption 10-bit D/A Converter
AN8146FBQ 10-Bit 3-channel D/A Converter ic
AN8261 Brushless Motor Driver
AN8267S Fan Motor Driver
AN8353UB Package =
AN8377N 3-channel Linear Driver
AN8387S 2-channel Linear Driver
AN8470NSA Spindle Motor Driver ic For Optical Disk
AN8472SA
AN8473SA Package =
AN8480NSB
AN8481SB
AN8488SB
AN8497SA
AN8523
AN8538SH Single PLL ic For Cellular Phone
AN8539SH 300 Mhz-band Single PLL ic
AN8585
AN8586

EEU-ED2G680 : 68F Aluminum Capacitor Radial, Can 400V; CAP ALUM 68UF 400V 20% RADIAL Specifications: Capacitance: 68F ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 10000 Hrs @ 105C ; Size / Dimension: 0.709" Dia (18.00mm) ; Lead Spacing: 0.295" (7.50mm) ; Surface Mount Land Size: - ; Mounting Type: Through Hole ; Package / Case: Radial, Ca

ECJ-1VC1H150J : 12pF Ceramic Capacitor 0603 (1608 Metric) 50V; CAP CER 12PF 50V 0603 Specifications: Capacitance: 12pF ; Voltage - Rated: 50V ; Tolerance: 5% ; Package / Case: 0603 (1608 Metric) ; Temperature Coefficient: C0G, NP0 ; Packaging: Cut Tape (CT) ; Features: - ; Lead Spacing: - ; Operating Temperature: -55C ~ 125C ; Mounting Type: Surface Mount, MLCC ; Lead Free Status

ECJ-2VC2A680J : 68pF Ceramic Capacitor 0805 (2012 Metric) 100V; CAP CERAMIC 68PF 100V NP0 0805 Specifications: Capacitance: 68pF ; Voltage - Rated: 100V ; Tolerance: 5% ; Package / Case: 0805 (2012 Metric) ; Temperature Coefficient: C0G, NP0 ; Packaging: Cut Tape (CT) ; Features: - ; Lead Spacing: - ; Operating Temperature: -55C ~ 125C ; Mounting Type: Surface Mount, MLCC ; Lead Free Statu

ECS-H1AY225R : 2.2F Tantalum Capacitor 1206 (3216 Metric) 10V; CAP TANT 2.2UF 10V 20% 1206 Specifications: Capacitance: 2.2F ; Voltage - Rated: 10V ; Tolerance: 20% ; Features: General Purpose ; Operating Temperature: -55C ~ 125C ; Lead Spacing: - ; ESR (Equivalent Series Resistance): - ; Lifetime @ Temp.: - ; Mounting Type: Surface Mount ; Type: Molded ; Package / Case: 1206 (3216 Me

LNJ316C8TRU : LEDs -; LED GREEN THRU BOARD W/LENS 1206 Specifications: Color: Green ; Lens Style/Size: Round with Domed Top, 1.7mm ; Millicandela Rating: 8.8mcd ; Voltage - Forward (Vf) Typ: 2.03V ; Wavelength - Dominant: - ; Wavelength - Peak: 565nm ; Current - Test: 10mA ; Viewing Angle: - ; Lens Type: - ; Luminous Flux @ Current - Test: - ; Package /

ERA-14EB152U : 1.5K Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 1.5K OHM 1/4W .1% 1210 Specifications: Resistance (Ohms): 1.5K ; Power (Watts): 0.25W, 1/4W ; Tolerance: 0.1% ; Packaging: Digi-Reel ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-3EKF1742V : 17.4K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 17.4K OHM 1/10W 1% 0603 SMD Specifications: Resistance (Ohms): 17.4K ; Power (Watts): 0.1W, 1/10W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-2RKF19R6X : 19.6 Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 19.6 OHM 1/10W 1% 0402 SMD Specifications: Resistance (Ohms): 19.6 ; Power (Watts): 0.1W, 1/10W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-P08J164V : 160K Ohm 0.333W, 1/3W Chip Resistor - Surface Mount; RES ANTI-SURGE 160K OHM 5% 1206 Specifications: Resistance (Ohms): 160K ; Power (Watts): 0.333W, 1/3W ; Tolerance: 5% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant

ERJ-P08J510V : 51 Ohm 0.333W, 1/3W Chip Resistor - Surface Mount; RES ANTI-SURGE 51 OHM 5% 1206 Specifications: Resistance (Ohms): 51 ; Power (Watts): 0.333W, 1/3W ; Tolerance: 5% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ENW-C9A21C4EF : Rf Transceiver Rf/if And Rfid; RF MODULE 802.15.4 W/PADS SNAP Specifications: Frequency: 2.4GHz ; Data Rate - Maximum: 250kbps ; Modulation or Protocol: 802.15.4 ; Applications: General Purpose ; Power - Output: 0dBm ; Sensitivity: -92dBm ; Voltage - Supply: 2.7 V ~ 3.4 V ; Current - Receiving: 45mA ; Current - Transmitting: 43mA ; Package / Case: PCB Module ;

ERJ-8ENF4120V : 412 Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES 412 OHM 1/4W 1% 1206 SMD Specifications: Resistance (Ohms): 412 ; Power (Watts): 0.25W, 1/4W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

Same catergory

AD404M82RBB-5 : Low Voltage Operation is More Suitable to be Used on Battery Backup, Portable Electronic.

AME8806 : LDO. 600ma CMOS LDO. The AME8806/8809/8842 family of positive, linear regulators feature low quiescent current (30A typ.) with low dropout voltage, making them ideal for battery applications. The space-saving SO-8 package is attractive for "Pocket" and "Hand Held" applications. These rugged devices have both Thermal Shutdown, and Current Fold-back to prevent device failure.

BQ24400D : ti BQ24400, Programmable Nicd/nimh Fast-charge Management Device. Safe management of fast charge for NiCd and NiMH battery packs. High-frequency switching controller for efficient and simple charger design Pre-charge qualification for detecting shorted, damaged, or overheated cells Fast-charge termination by peak voltahge (PVD), maximum temperature, and maximum charge time Selectable top-off mode for achieving maximum.

IP137M-LCC4A : Low Current. 0.5 Amp Negative Adjustable Voltage Regulator in Ceramic Surface Mount Package.

KA7806AE : 3-Terminal 1A Positive Voltage Regulator. Output Current to 1A Output Voltages of 24V Thermal Overload Protection Short Circuit Protection Output Transistor Safe Operating Area Protection The KA78XXE/KA78XXAE series of three-terminal positive regulator are available in the TO-220/D-PAK package and with several fixed output voltages, making them useful in a wide range of applications. Each type.

KF47 : Very Low Drop Voltage Regulators With Inhibit. VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT VERY LOW DROPOUT VOLTAGE (0.4V) VERY LOW QUIESCENT CURRENT (TYP. A IN OFF MODE, IN ON MODE) OUTPUT CURRENT 500 mA LOGIC-CONTROLLED ELECTRONIC SHUTDOWN OUTPUT VOLTAGES OF 12V INTERNAL CURRENT AND THERMAL LIMIT ONLY 2.2F FOR STABILITY AVAILABLE 2% ACCURACY 25 oC SUPPLY VOLTAGE REJECTION: 70 db (TYP.) TEMPERATURE.

LC05-6 : Telecom & Datacom Protection->T1/E1, T3/E3 Protect. Dual Low-capacitance TVS Array For Telecom Linecard Applications / SO-16.

MAX1672 : Step-up Down DC-DC Converter in Qsop Package. o Step-Up/Down Voltage Conversion to 11V Input Range 3.3V/5V or Adjustable Output Voltage Range o Output Current: at 5V (VIN at 5V (VIN 1.8V) o Smaller Inductor than SEPIC and Flybacks o Load Disconnects from Input in Shutdown o Supply Current from Battery: 85A (No-Load) 0.1A (Shutdown) o PGI/PGO Low-Battery Comparator o 16-Pin QSOP Package (Same.

MAX1844 : High-speed Step-down Controller With Accurate Current Limit For Notebook Computers.

MSR : . to +85C operation to 32 VDC input Fully isolated Opto-coupler feedback Switching frequency Single and dual outputs typical 80 kHz, variable freq. Triple output - 200 kHz, fixed Topology Flyback 40 V for 50 ms transient protection Inhibit function Indefinite short circuit protection to 70% efficiency External capacitors required Size (max.): x 0.370.

NCP561 : . The NCP561 series of fixed output low dropout linear regulators are designed for handheld communication equipment and portable battery powered applications which require low quiescent. The NCP561 series an ultralow quiescent current of 3.0 mA. Each device contains a voltage reference unit, an error amplifier, a PMOS power transistor, resistors for setting.

NJU7240Series : LDO. High Precision And Low Operating Current Tiny CMOS Positive Voltage Regulator With Standby Function.

PT6101 : Non-Isolated DC-DC Converters. 1 Amp Adjustable Positive Step-down Integrated Switching Regulator 90% Efficiency Adjustable Output Voltage Internal Short Circuit Protection Over-T emperature Protection On/Off Control (Ground Off) Small SIP Footprint Meets Requirements for FCC Part 15; Class B limits for Radiated Emissions Wide Input Range The PT6100 Series is a line of High-Performance.

PT7716 : Non-Isolated DC-DC Converters. +3.3V Input Voltage 20-A Output Current 5-bit Programmable: 1.85V (25mV Steps) VRM 9.0 Compatible High Efficiency (88%) Differential Remote Sense Over-Current Protection 27-Pin Space-Saving Package Solderable Copper Case Compatible with PT7744 20A "Current Booster" The PT7716 ExcaliburTM power module a 20-A integrated switching regulator (ISR) housed.

TPS75133 : . TPS75125Q, TPS75133Q WITH POWER GOOD TPS75325Q, TPS75333Q WITH RESET FAST-TRANSIENT-RESPONSE 1.5-A LOW-DROPOUT VOLTAGE REGULATORS 1.5-A Low-Dropout Voltage Regulator Available 2.5-V, 3.3-V, Fixed Output and Adjustable Versions Open Drain Power-Good (PG) Status Output (TPS751xxQ) Open Drain Power-On Reset With 100-ms Delay (TPS753xxQ) Dropout Voltage.

AP451S : LDO Controllers. 2 Channel Linear Controller with Independent Enable Function - 2 channel linear control Circuitries - Operating voltage can 18V - Under Voltage Lockout (UVLO) Protection - Current limit external BJT only - Independent enables function - Low ESR output capacitor (Multi-layer chip capacitor (MLCC)) application - Adjustable output voltage by external resisters.

FSEZ1307 : Boundary Mode PFC Controller The FAN6961 is an 8-pin, boundary-mode, PFC controller IC intended for controlling PFC pre-regulators. The FAN6961 provides a controlled on-time to regulate the output DC voltage and achieve natural power factor correction. The maximum on-time of the external switch is programmable to ensure safe operation during AC brownouts.

UCC27525 : Dual, 5A, High-Speed Low-Side Power MOSFET Driver The UCC2752x family of devices are dual-channel, high-speed, low-side gate driver devices capable of effectively driving MOSFET and IGBT power switches. Using a design that inherently minimizes shoot-through current, UCC2752x is capable of delivering high-peak current pulses of up to 5-A source and 5-A sink.

 
0-C     D-L     M-R     S-Z