Details, datasheet, quote on part number: AN8783SB
PartAN8783SB
CategoryPower Management
Description4-channel Linear Driver ic For Cd/cd-rom Drive
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload AN8783SB datasheet
Quote
Find where to buy
 
  

 

Features, Applications

The AN8783SB employs one channel of power op-amp. system and three channels of H-bridge system. Two channels out of three channels of Hbridge method are a current feedback system. So this IC is optimum for driving an actuator and a motor of CD/CD-ROM drive. It comes with a surface mount package which excels in a heat radiation characteristic.

Little phase delay due to current feedback system (2-channel for actuator) 4 modes of forward, reverse rotations, braking and standby can be selected from channels for loading motor (H-bridge method) by a digital signal from a microcomputer. Wide output dynamic range regardless of reference voltage of the system Setting the input level of a driver by an external resistor is possible. PC (power cut) function built-in (common for ch. 1, ch. 3 and ch. 4) Thermal shut-down circuit built-in (with hysteresis)


ch. 1 Direction det. current amp. ch. 2 Control logic ch. 3 ch. 4

Pin No. Description PC1 (power cut) input pin Driver-3 phase compensation pin Driver-3 input pin Driver-4 input pin Driver-3 feedback pin Driver-4 feedback pin Driver-4 phase compensation pin Driver-4 current feedback power supply pin Driver-4 reverse rotation output pin Driver-4 forward rotation output pin Driver-2, driver-4 GND pin Driver-3 reverse rotation output pin Driver-3 current feedback power supply pin Driver-3 forward rotation output pin Driver-2 forward rotation output pin Pin No. Fin Description Driver-2 power supply pin Driver-2 reverse rotation output pin Driver-1 reverse rotation output pin Driver-1 GND pin Driver-1 forward rotation output pin Driver-1 power supply pin VREF input pin Driver-1 input pin Driver-2 input pin Driver-2 output voltage adjustment pin PC2 (power cut) input pin N.C. Power supply pin GND pin

Parameter Supply voltage Supply current Power dissipation

Note) *1: Except for the operating ambient temperature and storage temperature, all ratings are for 25C. *2: Referring to "s Application Circuit Example", use within the range mW or less = 85C, following the allowable power dissipation characteristic curve of "s Application Notes".

Parameter Supply voltage Symbol SVCC , PVC2 Range to 14 Unit V

Parameter Current consumption 1 with no signal Current consumption 2 with no signal Current consumption 3 with no signal Driver 1 Output offset voltage Gain Relative gain Limit voltage Limit voltage Driver 2 Output voltage 1 Output voltage 1 Output voltage 2 Output voltage 1 V, RAS 4 V, RAS 1 V, RAS 4 V, RAS dB V Symbol ISVCC IVCC1 IVCC2 Conditions 0 A Min Typ 4 1 Max 6 4 Unit mA


 

Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
AN8787NSB 4-channel Linear Driver ic For Cd/cd-rom Drive
AN8806SB Package =
AN8807SB Three-beam Method Head Amplifier ic For Cd-rom
AN8808SB Three-beam Method Head Amplifier ic For CD (supporting The Hologram Pick-up)
AN8813NSB 4-channel Driver ic For Optical Disk Drive
AN8814SB Package =
AN8816SB 4ch. Linear Driver ic For Cd/cd-rom
AN8819NFB 4ch. Linear Driver ic + DC-DC Converter Control For CD
AN8837SB Low Power Consumption Cd-da Head Amplifier ic For 3-beam System Optical Pick-up
AN8839NSB Cd-da Head Amplifier ic For 3-beam System Optical Pick-up
AN8847SB Head Amplifier ic For Cd-rom Drive For 32 Times Speed or More
AN8849SB Package =
AN8882SB
AN8915
AN8916
AN8917
AN8918
AN8943
AN8946SB FM Demodulation ic For Bs/cs Broadcasting
AN93B06
AN93C02

2SD1994A : VCEO(V) = 50 ;; IC(A) = 1 ;; HFE(min) = 85 ;; HFE(max) = 340 ;; Package = MT-2-A1

2SK2211 : Marking = 2M ;; VDS(V) = ;; VDSS(V) = 30 ;; ID(A) = 1 ;; RDS(on) (typ)(W ) = 0.48 ;; RDS(on) (max)(W ) = 0.75 ;; Package = MiniP3-F1

EEV-HA1H470UP : 47F Aluminum Capacitor Radial, Can - SMD 50V; CAP ALUM 47UF 50V 20% SMD Specifications: Capacitance: 47F ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 2000 Hrs @ 105C ; Size / Dimension: 0.315" Dia (8.00mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.327" L x 0.327" W (8.30mm x 8.30mm) ; Mounting Type: Surface Mount ; Packa

ECH-U1183JC9 : 0.018F Film Capacitor 1913 (4833 Metric); CAP FILM 0.018UF 100VDC 1913 Specifications: Capacitance: 0.018F ; Tolerance: 5% ; Dielectric Material: Polyphenylene Sulphide (PPS) ; Package / Case: 1913 (4833 Metric) ; Packaging: Cut Tape (CT) ; Lead Spacing: - ; ESR (Equivalent Series Resistance): - ; Mounting Type: Surface Mount ; Features: General Purpose ; Lead Free S

ECQ-E1563KF : 0.056F Film Capacitor Radial; CAP FILM 0.056UF 100VDC RADIAL Specifications: Capacitance: 0.056F ; Tolerance: 10% ; Dielectric Material: Polyester, Metallized ; Package / Case: Radial ; Packaging: Bulk ; Lead Spacing: 0.197" (5.00mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; Features: General Purpose ; Lead Free Status: Lead Fr

ELL-CTV120M : Fixed Inductors, Coils, Choke 12H 3.7A 0.472" L x 0.472" W x 0.177" H (12.00mm x 12.00mm x 4.50mm) -; CHOKE COIL 12UH 3700MA SMD Specifications: Inductance: 12H ; Tolerance: 20% ; Package / Case: 0.472" L x 0.472" W x 0.177" H (12.00mm x 12.00mm x 4.50mm) ; Packaging: Digi-Reel ; Type: - ; Current: 3.7A ; Mounting Type: Surface Mount ; Q @ Freq: - ; Frequency - Self Resonant: - ; DC Resistance (DCR): 22 mOhm ; Shielding: S

ERA-S27J221V : 220 Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 220 OHM 1/10W 2700PPM 5%0805 Specifications: Resistance (Ohms): 220 ; Power (Watts): 0.1W, 1/10W ; Tolerance: 5% ; Packaging: Cut Tape (CT) ; Composition: Metal Film ; Temperature Coefficient: 2700ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-S08F5600V : 560 Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES ANTI-SULFUR 560 OHM 1% 1206 Specifications: Resistance (Ohms): 560 ; Power (Watts): 0.25W, 1/4W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-14NF3602U : 36K Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES 36K OHM 1/2W 1% 1210 SMD Specifications: Resistance (Ohms): 36K ; Power (Watts): 0.5W, 1/2W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C

DRC2144G0L : Transistor (bjt) - Single, Pre-biased Discrete Semiconductor Product 100mA 50V 200mW NPN - Pre-Biased; TRANS NPN W/RES 50V 100MA MINI3 Specifications: Transistor Type: NPN - Pre-Biased ; Voltage - Collector Emitter Breakdown (Max): 50V ; Current - Collector (Ic) (Max): 100mA ; Power - Max: 200mW ; Resistor - Base (R1) (Ohms): - ; Resistor - Emitter Base (R2) (Ohms): 47K ; Vce Saturation (Max) @ Ib, Ic: 250mV @ 500A, 10mA ; Current

Same catergory

ECU-V1H103KBV : 50/100m Sot-23 CMOS RF LDO Regulators.

H100-24S12 : 75 to 150 Watt "Half Bricks". 1400 PROVIDENCE HIGHWAY BUILDING 2 NORWOOD, MASSACHUSETTS 02062-5015 WWW.INTRONICS.COM Servers, Switches and Data Storage Wireless Communications Distributed Power Architecture Semiconductor Test Equipment Applications Networking Gear Data Communications Telecommunications Industrial / Medical The Q and H Families of high power, high density DC/DC converters.

KA7824AE : 3-Terminal 1A Positive Voltage Regulator. Output Current to 1A Output Voltages of 24V Thermal Overload Protection Short Circuit Protection Output Transistor Safe Operating Area Protection The KA78XXE/KA78XXAE series of three-terminal positive regulator are available in the TO-220/D-PAK package and with several fixed output voltages, making them useful in a wide range of applications. Each type.

M51957AFP : Voltage Detecting, System Resetting ic.

MM1075 : System Reset. System Reset(with Built-in Watchdog Timer). System Reset (with built-in watchdog timer) MM1075 System Reset (with built-in watchdog timer) This IC functions in a variety of CPU systems and other logic systems to generate a reset signal and reset the system accurately during momentary interruption or lowering of power supply voltage. It also has a built-in watchdog timer for operation diagnosis.

P18TG-2405Z41H35M : Power/w = 4 ;; Input/vdc = 9-36/18-72 ;; Output/vdc = +/-3,3/5/12/15/ Regulated ;; ISOlation = 3500V ;; Package = DIP24M.

PT8001 : Non-Isolated DC-DC Converters. 60A Output Current Multi-Phase Topology +5V Input 5-bit Programmable: to 1.850V High Efficiency Differential Remote Sense Short Circuit Protection Output Tracking Feature Over-Temp Shutdown Power Good & OV Flag Low-Profile Package Solderable Copper Case "Current Booster" Compatible The PT8000 series 60 A highperformance, Integrated Switching Regulator.

REG102GA-3.3 : ti REG102-33, Dmos 250 ma Low Dropout (LDO) Regulator. q NEW DMOS TOPOLOGY: Ultra Low Dropout Voltage: 150mV typ at 250mA Output Capacitor not Required for Stability q FAST TRANSIENT RESPONSE q VERY LOW NOISE: 28Vrms q HIGH ACCURACY: 1.5% max q HIGH EFFICIENCY: IGND 600A at IOUT = 250mA Not Enabled: IGND 3.0V, 3.3V, AND 5.0V ADJUSTABLE OUTPUT VERSIONS q OTHER OUTPUT VOLTAGES AVAILABLE UPON REQUEST q FOLDBACK.

RI-0505 : Unregulated DC/DC. Power = 2 ;; ISOlation = 1 ;; Input Voltages (VDC) = 5, 9, 12, 15, 24 ;; Output Voltages (VDC) = 3.3, 5, 7, 9, 12, 15, 24 ;; No. Of Outputs = S ;; Case = SIP4.

SMFLHP : . Fully qualified to Class to +125C operation to 40 VDC input Fully Isolated Magnetic feedback Fixed frequency, 600 kHz typical Topology Single Ended Forward Inhibit function input and output Sync function Output trim on single output models Indefinite short circuit protection Remote sense on single output models to 87% efficiency Parallelable to 270 watts.

TPIC6A259DW : Control and Monitoring->Power+ Logic. ti TPIC6A259, 8-Bit Addressable Latch.

TPS3820-33DBVR : ti TPS3820-33, Processor Supervisory Circuits. Delay Time ms (TPS3820) Manual Reset Input (TPS3820/3/5/8) Reset Output Available in Active-Low (TPS3820/3/4/5), Active-High (TPS3824) and Open-Drain (TPS3828) Supply Voltage Supervision Range 5 V Watchdog Timer (TPS3820/3/4/8) Supply Current 15 A (Typ) SOT23-5 Package Temperature Range. to 85C applications or Microprocessors Industrial Equipment.

UC1827 : Current Mode Controller. Buck Current/voltage Fed Push-pull PWM Controllers.

UC3172ADW : Motion/Motor Control. ti UC3172A, Full Bridge Power Amplifier. Plug-in Compatibility with the or 12V Operation 13mA Quiescent Supply Current 1.8mA Standby Current Precision Current Control 1A Load Current 1.65V Typical Total VSAT at 1A Controlled Velocity Head Parking Range Control for 4:1 Gain Change Compensation Adjust Pin for Bandwidth Control Inhibit Input and UVLO PLCC, SOIC, and Low Profile Quad Flat Pack.

LTC4447 : High Speed Synchronous N-Channel MOSFET Driver The LTC4447 is a high frequency gate driver with integrated bootstrap Schottky diode that is designed to drive two N-Channel MOSFETs in a synchronous DC/DC converter. The powerful rail-to-rail driver capability reduces switching losses in MOSFETs with high gate capacitance..

MAX16072 : P Supervisory Circuits In 4-Bump (1mm X 1mm) Chip-Scale Package The MAX16072/MAX16073/MAX16074 ultra-small, ultra-low-power, microprocessor (P) supervisory circuits feature a precision band-gap reference, comparator, and internally trimmed resistors that set the threshold voltage. Designed to monitor the system supply voltage and assert an output.

 
0-C     D-L     M-R     S-Z