Details, datasheet, quote on part number: EETUQ1J103KJ
PartEETUQ1J103KJ
Category
DescriptionAluminum Electrolytic Capacitors/ UQ Snap-in Type
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload EETUQ1J103KJ datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Country of Origin Japan Malaysia U.S.A (ii) Regarding USA product, , Please check PEDCA s Catalog. to 250 V.DC to 450 V.DC

30% smaller than series UP RoHS directive compliant Smoothing circuits, AC adaptor

Category temp. range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan

(120Hz/+20C) 3CV (A) max. after 5 minutes application of rated working voltage at +20C. C:Capacitance(F) V: W.V. (V.DC) Please see the attached standard products list Frequency (Hz) 1.15 1.40

Frequency Correction to 100V Factor for Ripple Current Factor to 450V

After 2000 hours application of DC voltage with specified ripple current rated DC working voltage) at +85C, the capacitor shall meet the following limits. Endurance Capacitance change % of initial measured value tan % of initial specified value DC leakage current < initial specified value After storage for 1000 hours +852 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance(With voltage treatment)

Standard terminal type does not require terminal trimming process.

Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.

Specification
Surface Mount Type Radial Lead Type Snap-in Type Aluminum Electrolytic Capacitors

Endurance 2000 h, Terminal Pitch : 10mm When capacitors 45L and 35 50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.

Endurance 2000 h, Terminal Pitch : 10mm When capacitors 45L and 35 50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.


 

Related products with the same datasheet
EETUQ1J103LJ
EETUQ1J123KJ
EETUQ1J123LJ
EETUQ1J153LJ
EETUQ1J183LJ
EETUQ1J222HJ
EETUQ1J272HJ
EETUQ1J332HJ
EETUQ1J332JJ
EETUQ1J392HJ
EETUQ1J392JJ
EETUQ1J472HJ
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
EETUQ1J103LJ Aluminum Electrolytic Capacitors/ UQ Snap-in Type
MN12861 CMOS 1-chip Peripheral LSI 16-bit MPU
AN1741S Single Operational Amplifiers
MSG43004 SiGe HBT type For Low-noise RF Amplifier
ECKD4C331MDU High Voltage Ceramic Disc Capacitors, Rated 4 to 15 Kvdc, Temp. Char. Y5T
2SB937Q Si PNP Epitaxial Planar
MN1227 CRT Control LSI for 60-character Display
AN79LXX 3-pin Negative Output Voltage Regulator (100 mA Type)
2SD2371 Transistors(selection Guide BY Applications AND Functions)
EEFUD0E151R Specialty Polymer Aluminum Electrolytic Capacitor
AN5356 Analog Interface Circuit FOR Teletext Systems
MA3036-H Silicon Planar type
EXBVXXXX Chip Resistor Array
MN6160P CMOS LSI Synchronizing Signal Generators for Color Video Cameras
PU4220 Power Transistor Arrays
AN6130N FM Noise Canceller Circuit
2SB902P Si PNP Epitaxial Planar
AN6135 Hi-fi Pop-nise Canceller Circuit
LNJ806XXXX Surface Mount LEDs
MN1451B CMOS 4-bit Single-chip Microcomputer with FLT Driver Capability
ELJFA220DF Chip Inductors
Same catergory

ASGASGL : Crystal Oscillators. 6.0 X 3.5 X 1.8 MM 5Vdc or 3.3Vdc, Ceramic Glass Sealed 0.5MHz to 125MHz.

CD74HC297 : PLL/Frequency Synthesis-> CMOS/BiCMOS->HC/HCT Fami. High-speed CMOS Logic Digital Phase-locked-loop.

ICM515B : Single-Chip Camera. 574x483 1/4" NTSC. ICM515NB 574x483 Pixel CMOS NTSC Sensor Data Sheet V1.0 November 2002 ICM515NB Color CMOS Image Sensor With 574x483 Pixel NTSC Composite Video Output Data Sheet V1.0 November 2002 IC Media Corporation 545 East Brokaw Road San Jose, CA 95112, U.S.A. Phone: (408) 451-8838 Fax: (408) 451-8839 Email: Sales@IC-Media.Com Web Site: www.ic-media.com IC Media.

ispXPLD5512MB : Ispxpld 5512MB (2.5V)512 Macrocells. 3.3V, 2.5V and 1.8V In-System Programmable eXpanded Programmable Logic Device XPLDTM Family SuperWIDETM logic (up to 136 inputs) Arithmetic capability Single- or Dual-port SRAM FIFO Ternary CAM Instant-on capability Single chip convenience In-System Programmable via IEEE 1532 Interface Infinitely reconfigurable via IEEE 1532 or sysCONFIGTM microprocessor.

LR2K0305 : Overload Relay 0.54-0.8a.

UPD75P0116 : CISC->uPD. 4-bit Single-chip Microcontroller. The m PD75P0116 replaces the mPD750108's internal mask ROM with a one-time PROM and expanded ROM capacity. Because the m PD75P0116 supports programming by users, it is suitable for use in prototype testing for system development using the or 750108 products, and for use in small-lot production. Detailed information about product and s can be found in the following.

BTK32C3 : Hc-49/us Microprocessor Crystals. Package =HC49/US (3.68mm max. ht.) BT=HC49/US (2.50mm max. ht.) BR=HC49/US (2.00mm max. ht.) Tolerance/Stability G=10/30 H=20/20 J= L=10/25 M=15/15 Configuration Options I=Insulator Tab, TR=Tape and Reel (ammo for thru-hole), L=Third Lead L3=Third Lead/Base Mount, V=Vinyl Sleeve, AT=Cut of Quartz SP=Spring Mount, G-Gull Wing, G1=Gull Wing/Metal.

1SS385FV : High Speed Switching. TOSHIBA Diode Silicon Epitaxial Schottky Barrier Type z Low forward voltage: = 0.23V (typ.) @IF 5mA z Ultra-small package Unit: mm Characteristic Maximum (peak) reverse Voltage Reverse voltage Maximum (peak) forward current Average forward current Surge current (10ms) Power dissipation Junction temperature Storage temperature range Operating temperature.

CSE32C3 : Hc-49/us SMD Microprocessor Crystals. Package C =HC49/US SMD (4.50mm max. ht.) CS=HC49/US SMD (3.50mm max. ht.) CR=HC49/US SMD (3.20mm max. ht.) Tolerance/Stability G=10/30 H=20/20 J= L=10/25 M=15/15 Mode of Operation 1=Fundamental (over 25.000MHz AT and BT Cut Available) 3=Third Overtone, 5=Fifth Overtone Operating Temperature Range to 85C Load Capacitance S=Series, XX=XXpF (Pico.

A28B04BAAA6 : Micro-match Miniature Connector (female ON Board TOP Entry Type).

3306/40 300 : Gray Flat Ribbon Cables, Wire Solid 26 AWG 300' (91.44m) Flat Cable; CABLE 40 COND 300' GRAY RIBBON. s: Color: Gray ; Wire Gauge: 26 AWG ; Length: 300' (91.44m) ; Cable Type: Flat Cable ; Pitch: 0.050" (1.27mm) ; Shielding: Unshielded ; Conductor Strand: Solid ; Number of Conductors: 40 ; Jacket (Insulation) Material: Poly-Vinyl Chloride (PVC) ; Operating.

7211 884 : Mounting Hardware NUT MOUNTING GRAY. s: Manufacturer: Altech ; Product Category: Mounting Hardware ; RoHS:  Details ; Type: Lock Nuts ; Material: Polyamide (PA) ; Thread Size: PG 13.5 ; Length: 27 mm ; Color: Gray ; Gender: Female ; Product: Hardware ; Factory Pack Quantity: 50 ; Thickness: 8 mm.

0215008.MXESPP : FUSE, AXIAL LEADED, TIME DELAY. s: Voltage Rating VAC: 250V ; Voltage Rating VDC: - ; Fuse Current: 8A ; Breaking Capacity: 1500A @ 250VAC ; Fuse Size Code: - ; Fuse Size Metric: 5mm x 20mm ; Fuse Size Imperial: - ; Blow Characteristic: Time Delay ; Series: 215SP.

FPLR12SR7516NA : DC/DC Converters & Regulators 16A Neg SMD 6-14VIn .7525-5V Out. The Fujitsu FDK Non-Isolated DC-DC converter with up to 96% efficiency, eliminates the need for heatsink. Power density up to 600W/cubic inch, wide input voltage range of 6V to 14V, no de-rating up to 85°C, with coplanarity of less than 0.004". Meets UL60950 standard, DEMCO certification.

ZA5350-B : Battery Holders, Clips, Contact Battery Product; CLIP TERM W/8"CORD BARE. s: Number of Cells: 1 ; Battery Cell Size: Lead Acid ; Termination Style: Wire Leads ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

OSTYK41410030 : Through Hole Terminal Block - Barrier Block Connectors, Interconnect Through Hole; CONN BARRIER STRIP 10CIRC 8.25MM. s: Color: Black ; Mounting Type: Through Hole ; Number of Rows: 1 ; Pitch: 0.325" (8.255mm) ; Terminal Block Type: Barrier Block ; Number of Circuits: 10 ; : - ; Current: 20A ; Voltage: 300V ; Wire Gauge: 12-22 AWG ; Top Termination:.

H3BBS-3018M : Socket to Socket Rectangular Cable Assembly 1.50' (457.20mm) Strain Relief; IDC CABLE - HSR30S/AE30M/HSR30S. s: Connector Type: Socket to Socket ; Number of Positions: 30 ; Contact Finish: Tin ; Number of Rows: 2 ; : Strain Relief ; Color: Multiple, Ribbon ; Length: 1.50' (457.20mm) ; Usage: - ; Shielding: Unshielded ; Contact Finish Thickness: - ; Cable.

RG2012P-273-W-T5 : 27K Ohm 0.125W, 1/8W Chip Resistor - Surface Mount; RES 27.0K OHM 1/8W .05% 0805. s: Resistance (Ohms): 27K ; Power (Watts): 0.125W, 1/8W ; Tolerance: 0.05% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

CRCW1218287RFKEK : 287 Ohm 1W Chip Resistor - Surface Mount; RES 287 OHM 1W 1% 1218 SMD. s: Resistance (Ohms): 287 ; Power (Watts): 1W ; Tolerance: 1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

2SD2137APA : Transistor (bjt) - Single Discrete Semiconductor Product 3A 80V 2W NPN; TRANS NPN LF 80VCEO 3A MT-4. s: Transistor Type: NPN ; Voltage - Collector Emitter Breakdown (Max): 80V ; Current - Collector (Ic) (Max): 3A ; Power - Max: 2W ; DC Current Gain (hFE) (Min) @ Ic, Vce: 120 @ 1A, 4V ; Vce Saturation (Max) @ Ib, Ic: 1.2V @ 375mA, 3A ; Frequency - Transition:.

 
0-C     D-L     M-R     S-Z