Details, datasheet, quote on part number: LNG808LBD
PartLNG808LBD
CategoryOptoelectronics => Display => LEDs => LED Lamps => Point-Lighting LEDs
TitlePoint-Lighting LEDs
DescriptionBrightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 3.0 ;; Lighting Color = Orange ;; Lens Color = Red Clear ;; Remarks = ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload LNG808LBD datasheet
  

 

Features, Applications

Conventional Part No. Global Prat No. Lighting Color

s Absolute Maximum Ratings (Ta = 25C) Lighting Color PD(mW) IF(mA) IFP(mA) VR(V) Topr(C) Tstg(C) Orange

Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec

s Electro-Optical Characteristics (Ta = 25C) Conventional Part No. LN88RPP LN88RCPP Unit Lighting Lens Color Orange Red Diffused Orange Red Clear - IO Typ 9.0 12.0 mcd Min 3.0 5.0 mcd 20 mA Typ V VF Max V P Typ 630 nm Typ 20 mA Max 3 V


Gallium arsenide material (GaAs) is used in this product.

Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


 

Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
LNG808RKD Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 3.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LNG809LBD Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 4.0 ;; Lighting Color = Amber ;; Lens Color = Amber Clear ;; Remarks = ;; Package =
LNG809RKD Round Type Visible Light Emitting Diode
LNG816RDD Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 3.0×7.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LNG816RFD
LNG819RDD Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.0×2.5 ;; Lighting Color = Green ;; Lens Color = Green Diffused ;; Remarks = ;; Package =
LNG81LCF8 Brightness = High Brightness ;; Type 1 = Round Type ;; Type 2 = Ingaalp ;; Outline (mm) = Round 5.0 ;; Lighting Color = Amber ;; Lens Color = Clear ;; Remarks = ;; Package =
LNG820RDD Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 1.75×7.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LNG820RFD
LNG830RBD Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 2.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LNG833WDD Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 1.0×4.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LNG833WFD
LNG838RFD Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 3.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LNG840CDD Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 4.4 ;; Lighting Color = Amber ;; Lens Color = Amber Clear ;; Remarks = ;; Package =
LNG840RKD
LNG842RDD Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.0×2.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LNG842RFD
LNG842RKD
LNG848WDD
LNG848WFD
LNG849RDD Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.7×2.7 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =

LN450YP : Point-Lighting LEDs Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.0×5.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =

MAZ30470L : Zener Diodes Silicon Planar type

ELJPC220MF : Chip Inductors

ELL-6PG560M : Fixed Inductors, Coils, Choke 56H 500mA 0.236" L x 0.236" W x 0.078" H (6.00mm x 6.00mm x 2.00mm) -; COIL CHOKE 56UH SHIELDED SMD Specifications: Inductance: 56H ; Tolerance: 20% ; Package / Case: 0.236" L x 0.236" W x 0.078" H (6.00mm x 6.00mm x 2.00mm) ; Packaging: Cut Tape (CT) ; Type: - ; Current: 500mA ; Mounting Type: Surface Mount ; Q @ Freq: - ; Frequency - Self Resonant: - ; DC Resistance (DCR): 520 mOhm ; Shielding

ELJ-FBR47MF : Fixed Inductors, Coils, Choke 470nH 580mA 1812 (4532 Metric) -; INDUCTOR .47 UH 20% 1812 SMD Specifications: Inductance: 470nH ; Tolerance: 20% ; Package / Case: 1812 (4532 Metric) ; Packaging: Cut Tape (CT) ; Type: - ; Current: 580mA ; Mounting Type: Surface Mount ; Q @ Freq: 30 @ 25.2MHz ; Frequency - Self Resonant: 135MHz ; DC Resistance (DCR): 400 mOhm Max ; Shielding: Unshielded ; App

ELJ-QE2N2ZFA : Fixed Inductors, Coils, Choke 2.2nH 970mA 0603 (1608 Metric) Non-Magnetic Core; INDUCTOR 2.2NH +-.2NH 0603 SMD Specifications: Inductance: 2.2nH ; Tolerance: 0.2nH ; Package / Case: 0603 (1608 Metric) ; Packaging: Tape & Reel (TR) ; Type: Non-Magnetic Core ; Current: 970mA ; Mounting Type: Surface Mount ; Q @ Freq: 88.6 @ 800MHz ; Frequency - Self Resonant: 6GHz ; DC Resistance (DCR): 40 mOhm Max ; Shie

ERJ-1TYJ751U : 750 Ohm 1W Chip Resistor - Surface Mount; RES 750 OHM 1W 5% 2512 SMD Specifications: Resistance (Ohms): 750 ; Power (Watts): 1W ; Tolerance: 5% ; Packaging: Digi-Reel ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-12ZYJ432U : 4.3K Ohm 0.75W, 3/4W Chip Resistor - Surface Mount; RES 4.3K OHM 3/4W 5% 2010 SMD Specifications: Resistance (Ohms): 4.3K ; Power (Watts): 0.75W, 3/4W ; Tolerance: 5% ; Packaging: Digi-Reel ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

MN101EF31G : 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80 Specifications: Data Bus: 8 Bit ; Life Cycle Stage: ACTIVE ; Clock Speed: 20 MHz ; ROM Type: Flash ; Supply Voltage: 2.7 to 5.5 volts ; I/O Ports: 70 ; Package Type: LFQP, Other, 14 X 14 MM, LEAD FREE, PLASTIC, LQFP-80 ; Pin Count: 80 ; Features: DMA

 
0-C     D-L     M-R     S-Z