Details, datasheet, quote on part number: LNG840CDD
PartLNG840CDD
CategoryOptoelectronics => Display => LEDs => LED Lamps => Point-Lighting LEDs
TitlePoint-Lighting LEDs
DescriptionBrightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 4.4 ;; Lighting Color = Amber ;; Lens Color = Amber Clear ;; Remarks = ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload LNG840CDD datasheet
  

 

Features, Applications

LN440YCP LNG440NDX Amber LN440CP LNG440CDX Amber LN840RCP LNG840LDD Orange LN840CP LNG840CDD Orange s Absolute Maximum Ratings (Ta = 25C) Lighting Color PD(mW) IF(mA) IFP(mA) VR(V) Topr(C) Tstg(C) Amber Orange

Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec





Gallium arsenide material (GaAs) is used in this product.

Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


 

Related products with the same datasheet
LN840RCP
LNG440CDX
LNG440NDX
LNG840LDD
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
LNG840LDD Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 4.4 ;; Lighting Color = Amber ;; Lens Color = Amber Clear ;; Remarks = ;; Package =
LNG840RKD
LNG842RDD Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.0×2.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LNG842RFD
LNG842RKD
LNG848WDD
LNG848WFD
LNG849RDD Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.7×2.7 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LNG849RFD
LNG849RKD
LNG850RDD Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.0×5.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LNG850RFD
LNG850RKD
LNG851LBD Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 4.0×2.0 ;; Lighting Color = Red ;; Lens Color = Red Clear ;; Remarks = ;; Package =
LNG851RBD
LNG863LBD Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 2.8 ;; Lighting Color = Red ;; Lens Color = Clear ;; Remarks = ;; Package =
LNG864LDD Brightness = ;; Type 1 = Round Type ;; Type 2 = ;; Outline (mm) = Round 4.8 ;; Lighting Color = Red ;; Lens Color = Clear ;; Remarks = ;; Package =
LNG873RDD Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 5.0×5.0 ;; Lighting Color = Red ;; Lens Color = Red Diffused ;; Remarks = ;; Package =
LNG873RFD
LNG873RKD
LNG875RKD Brightness = ;; Type 1 = Square Type ;; Type 2 = ;; Outline (mm) = Rectangle 3.9×1.75 ;; Lighting Color = Green ;; Lens Color = Green Diffused ;; Remarks = ;; Package =

UN411F : RETs (Resistor Equipped transistors) Marking = ;; VCEO(V) = -50 ;; IC(A) = -0.1 ;; PT(W) = 0.3 ;; R1(kW ) = 47 ;; R2(kW ) = ;; Package = NS-A1NS-B1

EEVFK1J681M : Aluminum Eleectrolytic Capacitors/fk

ARV23N4H : HIGH-FREQUENCY RELAY, SPDT, 4.5VDC Specifications: Coil Frequency Max: 18GHz ; Coil Voltage VDC Nom: 4.5V ; Contact Current Max: - ; Contact Voltage AC Nom: - ; Contact Voltage DC Nom: - ; Coil Resistance: 28.9ohm ; Contact Configuration: SPDT ; Coil Type: DC ; VSWR: 1.7 ; Insertion Loss Max: 0.7dB ; Relay Mounting: Panel ; External

ECQ-E10152JFB : 1500pF Film Capacitor Radial; CAP FILM 1500PF 1KVDC RADIAL Specifications: Capacitance: 1500pF ; Tolerance: 5% ; Dielectric Material: Polyester, Metallized ; Package / Case: Radial ; Packaging: Bulk ; Lead Spacing: 0.394" (10.00mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; Features: General Purpose ; Lead Free Status: Lead Fre

ELL-4LG3R3NA : Fixed Inductors, Coils, Choke 3.3H 1.3A 0.150" L x 0.150" W x 0.071" H (3.80mm x 3.80mm x 1.80mm) -; COIL CHOKE 3.3UH SHIELDED SMD Specifications: Inductance: 3.3H ; Tolerance: 30% ; Package / Case: 0.150" L x 0.150" W x 0.071" H (3.80mm x 3.80mm x 1.80mm) ; Packaging: Cut Tape (CT) ; Type: - ; Current: 1.3A ; Mounting Type: Surface Mount ; Q @ Freq: - ; Frequency - Self Resonant: - ; DC Resistance (DCR): 72 mOhm ; Shielding:

ERA-2AEB64R9X : 64.9 Ohm 0.063W, 1/16W Chip Resistor - Surface Mount; RES 64.9 OHM 1/16W .1% 0402 SMD Specifications: Resistance (Ohms): 64.9 ; Power (Watts): 0.063W, 1/16W ; Tolerance: 0.1% ; Packaging: Tape & Reel (TR) ; Composition: Thin Film ; Temperature Coefficient: 25ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERO-S2PHF20R5 : 20.5 Ohm 0.25W, 1/4W Through Hole Resistors; RES 20.5 OHM METAL FILM 1/4W 1% Specifications: Resistance (Ohms): 20.5 ; Power (Watts): 0.25W, 1/4W ; Tolerance: 1% ; Packaging: Tape & Box (TB) ; Composition: Metal Film ; Temperature Coefficient: 50ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-12SF2050U : 205 Ohm 0.75W, 3/4W Chip Resistor - Surface Mount; RES 205 OHM 3/4W 1% 2010 SMD Specifications: Resistance (Ohms): 205 ; Power (Watts): 0.75W, 3/4W ; Tolerance: 1% ; Packaging: Digi-Reel ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-S1DJ223U : 22K Ohm 0.75W, 3/4W Chip Resistor - Surface Mount; RES ANTI-SULFUR 22K OHM 5% 2010 Specifications: Resistance (Ohms): 22K ; Power (Watts): 0.75W, 3/4W ; Tolerance: 5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

EXB-28V911JX : Resistor 910 Ohm 31mW 4 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 910 OHM 4 RES 0804 Specifications: Resistance (Ohms): 910 ; Tolerance: 5% ; Power Per Element: 31mW ; Circuit Type: Isolated ; Number of Pins: 8 ; Packaging: Digi-Reel ; Number of Resistors: 4 ; Package / Case: 0804 (2010 Metric), Convex ; Mounting Type: Surface Mount ; Temperature Coefficient: 200ppm/C ; Lead Fre

ERJ-12SF4421U : 4.42K Ohm 0.75W, 3/4W Chip Resistor - Surface Mount; RES 4.42K OHM 3/4W 1% 2010 SMD Specifications: Resistance (Ohms): 4.42K ; Power (Watts): 0.75W, 3/4W ; Tolerance: 1% ; Packaging: Digi-Reel ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant

 
0-C     D-L     M-R     S-Z