|Category||Optoelectronics => Display => LEDs => LED Lamps => Chip LEDs|
|Description||Brightness = ;; Type 1 = ;; Type 2 = ;; Outline (mm) = ;; Lighting Color = ;; Remarks = ;; Package =|
|Company||Panasonic Industrial Company/Electronic Components|
|Datasheet||Download LNJ115W89RA datasheet
s Absolute Maximum Ratings (Ta = 25°C) Lighting Color PD(mW) IF(mA) IFP(mA) VR(V) Topr(°C) Tstg(°C) Green Ultra Bright Soft OrangePulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec
s Electro-Optical Characteristics (Ta = 25°C) Conventional Part No. LNJ115W89RA Unit Lighting Color Green
Gallium arsenide material (GaAs) is used in this product.
Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR
|Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components|
|LNJ115W8ARA Brightness = ;; Type 1 = ;; Type 2 = ;; Outline (mm) = ;; Lighting Color = ;; Remarks = ;; Package =|
|LNJ206R5ARA Brightness = High Brightness ;; Type 1 = S-j ;; Type 2 = Gaalas ;; Outline (mm) = 2125 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =|
|LNJ206R5ARW Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =|
|LNJ206R5RRX Brightness = High Brightness ;; Type 1 = S-j ;; Type 2 = Gaalas ;; Outline (mm) = 2125 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =|
|LNJ208R8ARA Brightness = High Brightness ;; Type 1 = SS ;; Type 2 = Gaalas ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =|
|LNJ210C6ARA Brightness = ;; Type 1 = Side View ;; Type 2 = ;; Outline (mm) = 1.2×2.3 ;; Lighting Color = Red ;; Remarks = ;; Package =|
|LNJ211R8ARA Brightness = High Brightness ;; Type 1 = 3216 ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =|
|LNJ211R8ARU Brightness = ;; Type 1 = Through The Board ;; Type 2 = ;; Outline (mm) = 3216 ;; Lighting Color = Red ;; Remarks = ;; Package =|
|LNJ212R8ARA Brightness = ;; Type 1 = TSS ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =|
|LNJ216C8ARA Brightness = High Brightness ;; Type 1 = Micro Lens ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =|
|LNJ218C8ARU1 Brightness = High Brightness ;; Type 1 = Dome Lens ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =|
|LNJ218C8TRU Ultra Hight Bright Surface Mounting Chip Led|
|LNJ251C4ARA Brightness = High Brightness ;; Type 1 = J ;; Type 2 = Gaalas ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =|
|LNJ251C4RRA Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =|
|LNJ261C3ARA Brightness = High Brightness ;; Type 1 = GW ;; Type 2 = Gaalas ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =|
|LNJ261C3RRA Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =|
2SD0602A : VCEO(V) = 50 ;; IC(A) = 0.5 ;; HFE(min) = 85 ;; HFE(max) = 340 ;; Package = Mini3-G1
EEAFC0J560B : Aluminum Electrolytic Capacitors/fc
EEE-0JA221WP : 220µF Aluminum Capacitor Radial, Can - SMD 6.3V; CAP ALUM 220UF 6.3V 20% SMD Specifications: Capacitance: 220µF ; ESR (Equivalent Series Resistance): - ; Features: General Purpose ; Lifetime @ Temp.: 1000 Hrs @ 85°C ; Size / Dimension: 0.248" Dia (6.30mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.260" L x 0.260" W (6.60mm x 6.60mm) ; Mounting Type: Surface Mount ; Packa
EEE-TG1H330UP : 330µF Aluminum Capacitor Radial, Can - SMD 50V; CAP ALUM 330UF 50V 20% SMD Specifications: Capacitance: 330µF ; ESR (Equivalent Series Resistance): 230.0 mOhm ; Features: General Purpose ; Lifetime @ Temp.: 1000 Hrs @ 125°C ; Size / Dimension: 0.492" Dia (12.50mm) ; Lead Spacing: - ; Surface Mount Land Size: 0.532" L x 0.532" W (13.50mm x 13.50mm) ; Mounting Type: Surface
ELT-3KN124B : Fixed Inductors, Coils, Choke 4µH 15mA 0.217" L x 0.130" W x 0.079" H (5.50mm x 3.30mm x 2.00mm) Ferrite Core; COIL 4.0UH 15MA STEP-UP SMD Specifications: Inductance: 4µH ; Tolerance: ±10% ; Package / Case: 0.217" L x 0.130" W x 0.079" H (5.50mm x 3.30mm x 2.00mm) ; Packaging: Digi-Reel® ; Type: Ferrite Core ; Current: 15mA ; Mounting Type: Surface Mount ; Q @ Freq: - ; Frequency - Self Resonant: - ; DC Resistance (DCR): 85 Ohm ; Shiel
ECE-A1HKS2R2B : Aluminum Electrolytic Capacitors - Leaded 2.2UF 50V ELECT KS RADIAL Specifications: Manufacturer: Panasonic ; Product Category: Aluminum Electrolytic Capacitors - Leaded ; RoHS: Details ; Capacitance: 2.2 uF ; Tolerance: 20 % ; Voltage Rating: 50 Volts ; Operating Temperature Range: - 40 C to + 85 C ; Termination Style: Radial ; Dimensions: 4 mm Dia. x 5 mm L
ERJ-S08J751V : 750 Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES ANTI-SULFUR 750 OHM 5% 1206 Specifications: Resistance (Ohms): 750 ; Power (Watts): 0.25W, 1/4W ; Tolerance: ±5% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ±100ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
EXB-N8V151JX : Resistor 150 Ohm 31mW 4 Resistors[number of pins] Pin Networks, Arrays; RES ARRAY 150 OHM 4 RES 0804 Specifications: Resistance (Ohms): 150 ; Tolerance: ±5% ; Power Per Element: 31mW ; Circuit Type: Isolated ; Number of Pins: 8 ; Packaging: Digi-Reel® ; Number of Resistors: 4 ; Package / Case: 0804 (2010 Metric), Concave ; Mounting Type: Surface Mount ; Temperature Coefficient: ±200ppm/°C ; Lead Fr
ERJ-B2CFR091V : 0.091 Ohm 1W Chip Resistor - Surface Mount; RES WIDE TERM 0.091 OHM 1% 1206 Specifications: Resistance (Ohms): 0.091 ; Power (Watts): 1W ; Tolerance: ±1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: 0/ +150ppm/°C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
XN0421600L : Transistor (bjt) - Arrays, Pre-biased Discrete Semiconductor Product 100mA 50V 300mW 2 NPN - Pre-Biased (Dual); TRANS ARRAY NPN/NPN W/RES MINI6P Specifications: Transistor Type: 2 NPN - Pre-Biased (Dual) ; Voltage - Collector Emitter Breakdown (Max): 50V ; Current - Collector (Ic) (Max): 100mA ; Power - Max: 300mW ; Resistor - Base (R1) (Ohms): 4.7K ; Resistor - Emitter Base (R2) (Ohms): - ; Vce Saturation (Max) @ Ib, Ic: 250mV @ 300µA, 10mA
EXB24AT8AR3X : 0 MHz - 2200 MHz RF/MICROWAVE FIXED ATTENUATOR Specifications: Attenuator Type: Fixed ; Frequency: 0.0 to 2.2 GHz ; VSWR: 1.3 1 ; Attenuation: 8 dB ; Package Type: CHIP-4
A-564 : Four Digits Display. Shape Part No. Common Cathode Anode Chip Raw Material Emitted Color Wave Electro-Optical Characteristics Length Vf(V)20mA Iv(ucd)10mA p(nm) Typ. Max. Typ. Fig.No. 1.All dimension are in millimeters (inches). mm (0.01") unless otherwise specified. E-33 .
APPSC04-41PBWA : Material: Ingan , Wavelength: 470nm. !0.4 INCH CHARACTER HEIGHT. !LOW CURRENT OPERATION. !HIGH CONTRAST AND LIGHT OUTPUT. ! EASY The Blue source color devices are made with InGaN on SiC Light Emitting Diode. !CATEGORIZED FOR LUMINOUS INTENSITY. !MECHANICALLY RUGGED. !GRAY FACE,WHITE SEGMENT. ! PACKAGE Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless.
HLMP-2598 : Segment Displays. Black Bezel Mounts. Panel and Legend Mounts for LED Light Bars Technical Data Firmly Mounts Light Bars in Panels Holds Legends for Front Panel or PC Board Applications One Piece, Snap-in Assembly Matte Black Bezel Design Enhances Panel Appearance Four Sizes Available May Be Installed in a Wide Range of Panel Thicknesses Panel Hole Easily Punched or Milled This series.
LDM-15658MI : 1.5" (5x8) Dot Matrix Displays.
MTBL5411-RG : Led Luminators.
OP750A : Sensor Phototransistor Transistor Rbe Plastic Sidelooker. Wide receiving angle Variety of sensitivity ranges Side-looking package for space Base-emitter resistor provides Absolute Maximum Ratings (TA 25o C unless otherwise noted) Collector-Emitter Voltage. 30 V Emitter Reverse Current. 10 mA Collector DC Current. 30 mA Storage and Operating Temperature Range. +100o C Lead Soldering Temperature [1/16 inch (1.6.
S5905-02 : Si-based Photodiodes.
TLPG1002 : Led SMD Lamp. 1.1(H) mm Size - Small Package - High Density Mounting is Available Available for Automounting Machine Use Reflow Soldering is Applicable Low Drive Current, High Intensity Light Emission - Recommended Forward Current: 10 mA (DC) Fast Response Time - Capable of Pulse Operation High Power Luminous Intensity Applications: - Telephone Cordless/Cellular.
UPD17203A : 4-bit Single-chip Microcontroller With Large-capacitance Static RAM And 3-channel Timer For Infrared Remote Controller.
XZMDK79W : Material (Color) = InGaAlP(Red);; Lens = Water Clear;; Peak Wave Length = 650;; Iv(ucd) If@10mA Min.= 180;; Iv(ucd) If@10mA Typ.= 449.
ELM 1-220 : LED Mounting Hardware LED Mount Self Ret 5mm Black .220 inch. s: Manufacturer: BIVAR ; Product Category: LED Mounting Hardware ; RoHS: Details ; Product: LED Mount, Self-Retaining ; LED Size: 5 mm ; Material: Extruded Polyvinyl Chloride ; Color: Black ; Body Length: 5.6 mm ; Packaging: Bulk ; Outside Diameter: 5.1 mm.
LTST-C194KSKT : Standard LED - SMD Yellow 589nm 22mcd 5mA. LiteOn 's 0603 Ultra Thin LED s are z-height measuring 0.3mm and 0.35mm and have an 0603 footprint . LiteOn 's 0603 Ultra Thin LED s are IR reflow compatible, have standard EIA tape and reel packaging, have high light output, and are energy-saving, Pb-free, and RoHS compliant. Ideal for a variety of applications,.
LTPL-P013B : LEDs - >75mA, High Brightness, Power Blue; LED 3 WATT BLUE SMD. s: Color: Blue ; Package / Case: 8mm Round ; Packaging: Cut Tape (CT) ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
TA001-11002 : LED Thermal Products; LED HEATSINK W/FAN 12V 86X30MM. s: Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.
SSR-90-W57S-R11-N3200 : High Power LEDs - White White 5700K 950 - 1000lm @ 3.15A. Luminus Devices Big Chip LEDs& 8482; are ideal for demanding applications that require maximum lumen density, efficiency, and reliability. The Big Chip LEDs& 8482; Family includes white, color, multi-chip color mix, and ultraviolet LEDs. Luminus Big Chip White LEDs provide lighting designers.