Details, datasheet, quote on part number: LNJ115W8PRA
PartLNJ115W8PRA
CategoryOptoelectronics => Display => LEDs => LED Lamps => Chip LEDs
TitleChip LEDs
DescriptionBrightness = ;; Type 1 = ;; Type 2 = ;; Outline (mm) = ;; Lighting Color = ;; Remarks = ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload LNJ115W8PRA datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec

s Electro-Optical Characteristics (Ta = 25C) Conventional Part No. LNJ115W8PRA Unit Lighting IO Lens Color Typ Min Green 5.0 1.8 White Diffused 6.7 2.2 Red - mcd 10 mA Typ 1.72 V Max V P Typ 655 nm Typ 10 mA Max 3 V




Gallium arsenide material (GaAs) is used in this product.

Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


 

Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
LNJ115W8VRA Brightness = ;; Type 1 = ;; Type 2 = ;; Outline (mm) = ;; Lighting Color = ;; Remarks = ;; Package =
LNJ162C3JRA
LNJ162C3XRA
LNJ206R5ARA Brightness = High Brightness ;; Type 1 = S-j ;; Type 2 = Gaalas ;; Outline (mm) = 2125 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ206R5ARW Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ206R5RRX Brightness = High Brightness ;; Type 1 = S-j ;; Type 2 = Gaalas ;; Outline (mm) = 2125 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ208R8ARA Brightness = High Brightness ;; Type 1 = SS ;; Type 2 = Gaalas ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ210C6ARA Brightness = ;; Type 1 = Side View ;; Type 2 = ;; Outline (mm) = 1.2×2.3 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ211R8ARA Brightness = High Brightness ;; Type 1 = 3216 ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ211R8ARU Brightness = ;; Type 1 = Through The Board ;; Type 2 = ;; Outline (mm) = 3216 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ212R8ARA Brightness = ;; Type 1 = TSS ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ216C8ARA Brightness = High Brightness ;; Type 1 = Micro Lens ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ218C8ARU1 Brightness = High Brightness ;; Type 1 = Dome Lens ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ218C8TRU Ultra Hight Bright Surface Mounting Chip Led
LNJ251C4ARA Brightness = High Brightness ;; Type 1 = J ;; Type 2 = Gaalas ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ251C4RRA Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ261C3ARA Brightness = High Brightness ;; Type 1 = GW ;; Type 2 = Gaalas ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ261C3RRA Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ306G5TR02 Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ306G5URA Brightness = High Brightness ;; Type 1 = S-j ;; Type 2 = Gaalas ;; Outline (mm) = 2125 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ306G5URW Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =

AN5304NK : NTSC Video Signal Processor ic

ELJPC102MF : Chip Inductors

EEAFC1C150H : Aluminum Electrolytic Capacitors/fc

ECH-U1154GCV : 0.15F Film Capacitor 2825 (7163 Metric); CAP FILM 0.15UF 100VDC 2825 Specifications: Capacitance: 0.15F ; Tolerance: 2% ; Dielectric Material: Polyphenylene Sulphide (PPS) ; Package / Case: 2825 (7163 Metric) ; Packaging: Cut Tape (CT) ; Lead Spacing: - ; ESR (Equivalent Series Resistance): - ; Mounting Type: Surface Mount ; Features: General Purpose ; Lead Free St

ELJ-NC56NKF : Fixed Inductors, Coils, Choke 56nH 200mA 1008 (2520 Metric) Non-Magnetic Core; INDUCTOR FIXED SMD .056UH 10% Specifications: Inductance: 56nH ; Tolerance: 10% ; Package / Case: 1008 (2520 Metric) ; Packaging: Digi-Reel ; Type: Non-Magnetic Core ; Current: 200mA ; Mounting Type: Surface Mount ; Q @ Freq: 15 @ 100MHz ; Frequency - Self Resonant: 670MHz ; DC Resistance (DCR): 630 mOhm Max ; Shielding: Unshi

ERJ-1GEF1100C : 110 Ohm 0.05W, 1/20W Chip Resistor - Surface Mount; RES 110 OHM 1/20W 1% 0201 SMD Specifications: Resistance (Ohms): 110 ; Power (Watts): 0.05W, 1/20W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 200ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-3EKF5491V : 5.49K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 5.49K OHM 1/10W 1% 0603 SMD Specifications: Resistance (Ohms): 5.49K ; Power (Watts): 0.1W, 1/10W ; Tolerance: 1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: 100ppm/C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERG2SG750 : RESISTOR, METAL OXIDE FILM, 2 W, 2 %, 350 ppm, 75 ohm, THROUGH HOLE MOUNT Specifications: Category / Application: General Use ; Technology / Construction: MetalOxide ; Mounting / Packaging: ThroughHole, Axial Leads, AXIAL LEADED ; Resistance Range: 75 ohms ; Tolerance: 2 +/- % ; Temperature Coefficient: 350 ±ppm/°C ; Power Rating: 2 watts (0.0027 HP) ; Operating DC Volt

Same catergory

AN6884 : 5-dot Led Driver Circuit.

APDC02-41YWA : Material: GAASp/gap , Wavelength: 588nm. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. !I.C. COMPATIBLE. !MECHANICALLY RUGGED. !GRAY FACE,WHITE SEGMENT. !PACKAGE Notes: 1. All dimensions are in millimeters (inches),Tolerance is 0.25(0.01") unless otherwise noted. 2. s are subject to change without notice. N o. Dic m A Min.

CAGFF : Filters. Gain Flattening Filter 3-port. Gain Flattering Filters (GFF) for Optical Amplifiers The Bookham Technology solla-Q wide-band filter family is based on thin-film interference filter technology. Bookham Technology uses its proprietary Advanced Energetic Deposition, AED, process to produce gain flattening filters. The AED process state-of-the-art layer thickness control enabling the desired.

CXD3531R : LCD Drivers. Digital Signal Driver/timing Generator. The CXD3531R incorporates digital signal processor type RGB driver, color shading correction and timing generator functions onto a single IC. Operation is possible with a system clock to 100 [MHz] (max.). This IC can process video signals in bands to 100MHz, and can output the timing signals for driving various Sony LCD panels. Various picture quality.

FU-427SLD-F1 : Laser Module->Consumer. LD Module With Singlemode Fiber Pigtail. Mod ule type FU-427SLD-F1 has been developed for coupling a sin glemode optical fib er and 1.3 mm wavelength InGaAsP LD (Laser diode). FU-427SLD-F1 is suitable to light source for highspeed long haul digital optical communicatio n systems and measuring instruments. High-speed response Emission wavelength 1.3 mm band Low threshold current (7mA typ.).

HDSP-7802-00000 : 7.6 MM ( 0.3 Inch ) Micro Bright Seven Segment Displays. mm (0.3 inch) Micro Bright Seven Segment Displays Technical Data Available with Colon for Clock Display Compact Package x 0.500 inches Leads mm (0.1 inch) Centers Choice of Colors AlGaAs Red, High Efficiency Red, Yellow, Green, Orange Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Surface Color Gives Optimum Contrast 50 Viewing.

K3022P : Optocoupler With Phototriac Output. The K3020P(G) series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode a 6-lead plastic dual inline package. The elements are mounted on one leadframe using a coplanar technique, providing a fixed distance between input and output for highest safety requirements. Applications Circuits for safe protective separation.

LJ2421-11EWRN : Emitting Color: Green , Material: Gap , Wavelength(nm): 572. LJ 24X1-21 SINGLE COLOR ANODE ROW (STANDARD CIRCUIT) ROW NO. (ANODE) PIN NO. COLUMN NO. (CATHODE) PIN NO. LJ 24X1-23 SINGLE COLOR ANODE ROW (SPECIAL CIRCUIT) ROW NO. (ANODE) PIN NO. COLUMN NO. (CATHODE) PIN NO. .

SID1010CXM : Infrared LED Lamp. Absolute maximum ratings (Ta=25C) Symbol IF IFP VR Top Tstg Unit mA mA/ V C Rating to +100 Condition Above f=1kHz, tw10s Electrical Optical characteristics (Ta=25C) Part Number SID1010CXM SID1K10CXM Peak wavelength Spectrum half width Forward voltage Reverse current Optical Power VF Condition IR Condition Ie P Condition Chip Dimension A (V) A) VR (mW/sr).

W53BT12.7/YD : Material: GAASp/gap , Wavelength: 588nm. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. FOR BACK PANEL ILLUMINATION, Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. s are subject to change without.

XEUY24D : Material (Color) = GaAsP/GaP(Yellow);; Lens = Yellow Diffused;; Peak Wave Length = 590;; Iv(ucd) If@10mA Min.= 5;; Iv(ucd) If@10mA Typ.= 9.

XLUYR59W : Material (Color) = GaAsP/GaP(Red) / GaAsP/GaP(Yellow);; Lens = Water Clear;; Peak Wave Length = 627 / 590;; Iv(ucd) If@10mA Min.= 100 / 20;; Iv(ucd) If@10mA Typ.= 148 / 58.

LK202-25 : Display Modules - LCD, OLED Character and Numeric 5VDC; LCD ALPHA/NUM DISPL 20X2 Y/G BK. s: Display Type: - ; Display Mode: Transmissive ; Display Format: 20 x 2 ; Character Format: 5 x 7 Dots ; Character Size: 5.55mm H x 3.20mm W ; Backlight: - ; Viewing Area: 82.20mm L x 18.20mm W ; Operating Temperature: 0C ~ 50C ; Voltage - Supply: 5VDC ; Dot Size:.

550-0708F : LED , Round with Domed Top, 5mm 5V 15mA Green Through Hole, Right Angle; LED CBI 5MM GRN DIFF 5V RA. s: Color: Green ; Mounting Type: Through Hole, Right Angle ; Configuration: Single ; Voltage Rating: 5V ; Current: 15mA ; Lens Style/Size: Round with Domed Top, 5mm ; Packaging: Bulk ; Lens Type: Diffused ; Lead Free Status: Lead Free ; RoHS Status:.

LN863RCPP : LEDs -; LED ORANGE CLEAR ROUND FLAT TOP. s: Color: Orange ; Lens Style/Size: Round with Flat Top, 2.8mm ; Millicandela Rating: 1mcd ; Voltage - Forward (Vf) Typ: 2.1V ; Wavelength - Dominant: - ; Wavelength - Peak: 630nm ; Current - Test: 20mA ; Viewing Angle: - ; Lens Type: Clear, Tinted ; Luminous Flux @ Current - Test: - ; Package / Case: Radial.

SSL-LX305F4SRD : LEDs -; LED T-3MM 660NM SRED DIFF. s: Color: Red ; Lens Style/Size: Round with Domed Top, 3mm, T-1 ; Millicandela Rating: 80mcd ; Voltage - Forward (Vf) Typ: 1.7V ; Wavelength - Dominant: - ; Wavelength - Peak: 660nm ; Current - Test: 20mA ; Viewing Angle: 60 ; Lens Type: Diffused, Tinted ; Luminous Flux @ Current - Test: - ; Package / Case: Radial.

LTL-4231T-R2 : LEDs -; LED W/INT RES 3MM 12V GREEN DIFF. s: Color: Green ; Lens Style/Size: Round with Domed Top, 3mm, T-1 ; Millicandela Rating: 19mcd ; Voltage - Forward (Vf) Typ: 15V ; Wavelength - Dominant: 569nm ; Wavelength - Peak: 565nm ; Current - Test: 12mA ; Viewing Angle: 40 ; Lens Type: Diffused, Tinted ; Luminous Flux @ Current - Test: - ; Package / Case:.

E32-DC50 : Accessories; SENS FIBER OPTICS. s: Accessory Type: Fiber Optic Cable ; For Use With/Related Products: - ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant.

 
0-C     D-L     M-R     S-Z