Details, datasheet, quote on part number: LNJ206R5RRX
PartLNJ206R5RRX
CategoryOptoelectronics => Display => LEDs => LED Lamps => Chip LEDs
TitleChip LEDs
DescriptionBrightness = High Brightness ;; Type 1 = S-j ;; Type 2 = Gaalas ;; Outline (mm) = 2125 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
CompanyPanasonic Industrial Company/Electronic Components
DatasheetDownload LNJ206R5RRX datasheet
Quote
Find where to buy
 
  

 

Features, Applications

Pulse width 1 msec. The condition of IFP is duty 10%, Pulse width 1 msec

Lighting IO Lens Color Typ Min Red Diffused 0.4 0.15 Ultra 5.0 1.7 Bright Red Diffused Green Diffused 0.9 0.3 Soft Orange Yellow Diffused 0.8 mcd -





Gallium arsenide material (GaAs) is used in this product.

Therefore, do not burn, destroy, cut, crush, or chemically decompose the product, since gallium arsenide material in powder or vapor form is harmful to human health. Observe the relevant laws and regulations when disposing of the products. Do not mix them with ordinary industrial waste or household refuse when disposing of GaAs-containing products.

Request for your special attention and precautions in using the technical information and semiconductors described in this material

(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and afterunpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.

Please read the following notes before using the datasheets

A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR


 

Related products with the same datasheet
LNJ306G5URA
LNJ806K5SRX
Some Part number from the same manufacture Panasonic Industrial Company/Electronic Components
LNJ208R8ARA Brightness = High Brightness ;; Type 1 = SS ;; Type 2 = Gaalas ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ210C6ARA Brightness = ;; Type 1 = Side View ;; Type 2 = ;; Outline (mm) = 1.2×2.3 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ211R8ARA Brightness = High Brightness ;; Type 1 = 3216 ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ211R8ARU Brightness = ;; Type 1 = Through The Board ;; Type 2 = ;; Outline (mm) = 3216 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ212R8ARA Brightness = ;; Type 1 = TSS ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ216C8ARA Brightness = High Brightness ;; Type 1 = Micro Lens ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ218C8ARU1 Brightness = High Brightness ;; Type 1 = Dome Lens ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ218C8TRU Ultra Hight Bright Surface Mounting Chip Led
LNJ251C4ARA Brightness = High Brightness ;; Type 1 = J ;; Type 2 = Gaalas ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ251C4RRA Brightness = ;; Type 1 = J ;; Type 2 = ;; Outline (mm) = 3.2×2.0 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ261C3ARA Brightness = High Brightness ;; Type 1 = GW ;; Type 2 = Gaalas ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ261C3RRA Brightness = ;; Type 1 = GW ;; Type 2 = ;; Outline (mm) = 4.6×2.2 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ306G5TR02 Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ306G5URA Brightness = High Brightness ;; Type 1 = S-j ;; Type 2 = Gaalas ;; Outline (mm) = 2125 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ306G5URW Brightness = High Brightness ;; Type 1 = S-gw ;; Type 2 = Gaalas ;; Outline (mm) = 2.9×1.25 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ308G8JRA Surface Mounting Chip Led
LNJ308G8LRA Brightness = High Brightness ;; Type 1 = SS ;; Type 2 = Gaalas ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ310M6URA Brightness = ;; Type 1 = Side View ;; Type 2 = ;; Outline (mm) = 1.2×2.3 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ311G8TRA Brightness = High Brightness ;; Type 1 = 3216 ;; Type 2 = Gaalas ;; Outline (mm) = 3216 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =
LNJ311G8TRU Brightness = ;; Type 1 = Through The Board ;; Type 2 = ;; Outline (mm) = 3216 ;; Lighting Color = Red ;; Remarks = ;; Package =
LNJ312G8LRA Brightness = ;; Type 1 = TSS ;; Type 2 = ;; Outline (mm) = 1608 ;; Lighting Color = High Bright Red ;; Remarks = ;; Package =

ECJZEC1E120K : Multilayer Ceramic CHIP Capacitors ( FOR General Electronic Equipment )

ECW-H20392JV : 3900pF Film Capacitor Radial; CAP FILM 3900PF 2KVDC RADIAL Specifications: Capacitance: 3900pF ; Tolerance: ▒5% ; Dielectric Material: Polypropylene, Metallized ; Package / Case: Radial ; Packaging: Bulk ; Lead Spacing: 0.591" (15.00mm) ; ESR (Equivalent Series Resistance): - ; Mounting Type: Through Hole ; Features: High Frequency and High Stability ; Lead

ELC-16B6R8L : Fixed Inductors, Coils, Choke 6.8ÁH 6.7A Radial -; COIL CHOKE 6.8UH RADIAL Specifications: Inductance: 6.8ÁH ; Tolerance: ▒20% ; Package / Case: Radial ; Packaging: Bulk ; Type: - ; Current: 6.7A ; Mounting Type: Through Hole ; Q @ Freq: - ; Frequency - Self Resonant: - ; DC Resistance (DCR): 18 mOhm ; Shielding: Unshielded ; Applications: General Purpose ; Lead Free Statu

ELJ-RF2N2DF : Fixed Inductors, Coils, Choke 2.2nH 400mA 0402 (1005 Metric) Non-Magnetic Core; INDUCTOR 2.2NH +-.3NH 0402 SMD Specifications: Inductance: 2.2nH ; Tolerance: ▒0.3nH ; Package / Case: 0402 (1005 Metric) ; Packaging: Digi-Reel« ; Type: Non-Magnetic Core ; Current: 400mA ; Mounting Type: Surface Mount ; Q @ Freq: 8 @ 100MHz ; Frequency - Self Resonant: 6GHz ; DC Resistance (DCR): 90 mOhm Max ; Shielding: Unshie

ERJ-2RKF1433X : 143K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 143K OHM 1/10W 1% 0402 SMD Specifications: Resistance (Ohms): 143K ; Power (Watts): 0.1W, 1/10W ; Tolerance: ▒1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: ▒100ppm/░C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-14NF17R8U : 17.8 Ohm 0.5W, 1/2W Chip Resistor - Surface Mount; RES 17.8 OHM 1/2W 1% 1210 SMD Specifications: Resistance (Ohms): 17.8 ; Power (Watts): 0.5W, 1/2W ; Tolerance: ▒1% ; Packaging: Digi-Reel« ; Composition: Thick Film ; Temperature Coefficient: ▒100ppm/░C ; Lead Free Status: Contains Lead ; RoHS Status: RoHS Non-Compliant

ERJ-3EKF7502V : 75K Ohm 0.1W, 1/10W Chip Resistor - Surface Mount; RES 75.0K OHM 1/10W 1% 0603 SMD Specifications: Resistance (Ohms): 75K ; Power (Watts): 0.1W, 1/10W ; Tolerance: ▒1% ; Packaging: Cut Tape (CT) ; Composition: Thick Film ; Temperature Coefficient: ▒100ppm/░C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

ERJ-S08F45R3V : 45.3 Ohm 0.25W, 1/4W Chip Resistor - Surface Mount; RES ANTI-SULFUR 45.3 OHM 1% 1206 Specifications: Resistance (Ohms): 45.3 ; Power (Watts): 0.25W, 1/4W ; Tolerance: ▒1% ; Packaging: Tape & Reel (TR) ; Composition: Thick Film ; Temperature Coefficient: ▒100ppm/░C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

MAZ410000F : Diode - Zener - Single Discrete Semiconductor Product 200nA @ 7V 10V 370mW Through Hole; DIODE ZENER 10V 370MW DO-34 Specifications: Voltage - Zener (Nom) (Vz): 10V ; Power - Max: 370mW ; Impedance (Max) (Zzt): 20 Ohm ; Voltage - Forward (Vf) (Max) @ If: 900mV @ 10mA ; Current - Reverse Leakage @ Vr: 200nA @ 7V ; Tolerance: - ; Mounting Type: Through Hole ; Package / Case: DO-204AG, DO-34, Axial ; Packaging: Cut T

ERJ-XGEJ684Y : 680K Ohm 0.03W, 1/32W Chip Resistor - Surface Mount; RESISTOR 680KOHM 1/32W 5% 01005 Specifications: Resistance (Ohms): 680K ; Power (Watts): 0.03W, 1/32W ; Tolerance: ▒5% ; Packaging: Digi-Reel« ; Composition: Thick Film ; Temperature Coefficient: ▒200ppm/░C ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant

EVQ-P2H02B : SPST-NO Tactile Switch Off-Mom 0.02A @ 15VDC; SWITCH LT 4.7MMX3.5MM 250GF SMD Specifications: Actuator Type: Standard ; Circuit: SPST-NO ; Contact Rating @ Voltage: 0.02A @ 15VDC ; Mounting Type: Surface Mount ; Operating Force: 250gf ; Orientation: Vertical ; Outline: 4.70mm x 3.50mm ; Switch Function: Off-Mom ; Illumination: Non-Illuminated ; Lead Free Status: Lead Free ; R

2SC3935GQL : Transistor (bjt) - Single Discrete Semiconductor Product 50mA 10V 150mW NPN; TRANS NPN 10VCEO 50MA SMINI-3P Specifications: Transistor Type: NPN ; Voltage - Collector Emitter Breakdown (Max): 10V ; Current - Collector (Ic) (Max): 50mA ; Power - Max: 150mW ; DC Current Gain (hFE) (Min) @ Ic, Vce: 110 @ 7.2mA, 2.4V ; Vce Saturation (Max) @ Ib, Ic: 500mV @ 4mA, 20mA ; Frequency - Transition: 2.5GHz ; Current

 
0-C     D-L     M-R     S-Z